July 2004 - syslog-ng - lists.balabit.hu

Newbie Filter question (Solaris)
by Kenneth Gullberg 06 Aug '04

06 Aug '04

Hi, Im new to syslogng and want to replace the normal syslogd in solaris with -ng because of the filters. I run postfix on 2 loadbalanced machines and i want to get rid of the healthchecks log entries. I setup a conf file that looks like this: options { long_hostnames(off); # doesn't actually help on Solaris, log(3) truncates at 1024 chars log_msg_size(8192); # buffer just a little for performance sync(1); # memory is cheap, buffer messages unable to write (like to loghost) log_fifo_size(2048); # The time to wait before a dead connection is reestablished (seconds) time_reopen(10); }; ############################################################### source src { sun-stream("/dev/log" door("/etc/.syslog_door")); internal(); }; ############################################################### destination alteon { file("/var/log/alteon"); }; destination notalteon { file("/var/log/notalteon"); }; destination ipf { file("/var/log/ipf.log"); }; ############################################################### filter f_mail { facility(mail); }; filter f_not_mail { not facility(mail); }; filter f_ipf { facility(local0); }; filter f_alteon { match("10.155.68.2") or match("10.155.68.3"); }; filter f_notalteon { not match("10.155.68.2") or not match("10.155.68.3"); }; ############################################################### log { source(src); filter(f_alteon); destination(alteon); }; log { source(src); filter(f_notalteon); destination(notalteon); }; log { source(src); filter(f_ipf); destination(ipf); }; According to this i should log everything that contains 10.155.68.2 or .3 to /var/log/alteon and if it doesnt contain .2 or .3 to /var/log/notalteon and it will also send the ip filter logs to its own log (which works). It seems that f_alteon och f_ipf works. But f_notalteon logs both stuff that does contain .2 and .3 and stuff that doesnt contain .2 and .3 What have i missed? // Kenneth

2 1

OpenBSD 3.5 not logging.. anything
by markzero＠logik.ath.cx 30 Jul '04

30 Jul '04

I have sandboxed Syslog-ng on OpenBSD 3.5. It doesn't appear to be logging anything other than itself. # ls -al /dev/log sr-Sr-S--- 1 _syslogng _syslogng 0 Jul 30 22:50 /dev/log # ls -al /var/log/ total 156 drwx------ 2 _syslogng _syslogng 512 Jul 30 22:36 . drwxr-xr-x 20 root wheel 512 Jul 28 11:21 .. -rw-r----- 1 _syslogng _syslogng 566 Jul 30 22:50 all.log -rw-r----- 1 _syslogng _syslogng 586 Jul 28 11:20 authlog -rw-r----- 1 _syslogng _syslogng 45 Jul 28 11:15 daemon -rw-r----- 1 _syslogng _syslogng 22685 Jul 30 22:50 debug -rw------- 1 _syslogng _syslogng 304 Jul 28 13:30 failedlogin -rw-r----- 1 _syslogng _syslogng 0 Mar 29 19:47 ftpd -rw-r----- 1 _syslogng _syslogng 268536 Jul 30 22:36 lastlog -rw-r----- 1 _syslogng _syslogng 0 Mar 29 19:47 lpd-errs -rw------- 1 _syslogng _syslogng 415 Jul 28 11:30 maillog -rw-r----- 1 _syslogng _syslogng 33733 Jul 30 22:50 messages -rw------- 1 _syslogng _syslogng 0 Mar 29 19:47 secure -rw-r----- 1 _syslogng _syslogng 22685 Jul 30 22:50 syslog -rw-r----- 1 _syslogng _syslogng 9600 Jul 30 22:46 wtmp -rw-r--r-- 1 _syslogng _syslogng 147 Jul 28 11:49 wtmp.0.gz -rw-r----- 1 _syslogng _syslogng 0 Mar 29 19:47 xferlog and my config file: # $Xanthus: syslog-ng.conf,v 1.1 2004/07/27 02:56:44 markzero Exp $ # syslog-ng config # options { long_hostnames(off); owner(_syslogng); group(_syslogng); perm(0640); dir_owner(_syslogng); dir_group(_syslogng); dir_perm(0640); sync(0); }; source src { unix-stream("/dev/log" owner("_syslogng") group("_syslogng") perm(06440)); internal(); }; destination all { file("/var/log/all.log"); }; destination authlog { file("/var/log/auth.log"); }; destination syslog { file("/var/log/syslog"); }; destination cron { file("/var/log/cron.log"); }; destination daemon { file("/var/log/daemon.log"); }; destination kern { file("/var/log/kern.log"); }; destination lpr { file("/var/log/lpr.log"); }; destination user { file("/var/log/user.log"); }; destination uucp { file("/var/log/uucp.log"); }; destination mail { file("/var/log/mail.log"); }; destination mailinfo { file("/var/log/mail.info"); }; destination mailwarn { file("/var/log/mail.warn"); }; destination mailerr { file("/var/log/mail.err"); }; destination newscrit { file("/var/log/news/news.crit"); }; destination newserr { file("/var/log/news/news.err"); }; destination newsnotice { file("/var/log/news/news.notice"); }; destination debug { file("/var/log/debug"); }; destination messages { file("/var/log/messages"); }; destination console { usertty("root"); }; #destination loghost { udp("loghost" port(999)); }; filter test { level(debug..emerg); }; filter f_auth { facility(auth); }; filter f_authpriv { facility(auth, authpriv); }; filter f_syslog { not facility(authpriv, mail); }; filter f_cron { facility(cron); }; filter f_daemon { facility(daemon); }; filter f_kern { facility(kern); }; filter f_lpr { facility(lpr); }; filter f_mail { facility(mail); }; filter f_user { facility(user); }; filter f_uucp { facility(cron); }; filter f_news { facility(news); }; filter f_debug { not facility(auth, authpriv, news, mail); }; filter f_messages { level(info..warn) and not facility(auth, authpriv, mail, news); }; filter f_emergency { level(emerg); }; filter f_info { level(info); }; filter f_notice { level(notice); }; filter f_warn { level(warn); }; filter f_crit { level(crit); }; filter f_err { level(err); }; log { source(src); filter(test); destination(all); }; log { source(src); filter(f_authpriv); destination(authlog); }; log { source(src); filter(f_syslog); destination(syslog); }; log { source(src); filter(f_cron); destination(cron); }; log { source(src); filter(f_daemon); destination(daemon); }; log { source(src); filter(f_kern); destination(kern); }; log { source(src); filter(f_lpr); destination(lpr); }; log { source(src); filter(f_mail); destination(mail); }; log { source(src); filter(f_user); destination(user); }; log { source(src); filter(f_uucp); destination(uucp); }; log { source(src); filter(f_mail); filter(f_info); destination(mailinfo); }; log { source(src); filter(f_mail); filter(f_warn); destination(mailwarn); }; log { source(src); filter(f_mail); filter(f_err); destination(mailerr); }; log { source(src); filter(f_news); filter(f_crit); destination(newscrit); }; log { source(src); filter(f_news); filter(f_err); destination(newserr); }; log { source(src); filter(f_news); filter(f_notice); destination(newsnotice); }; log { source(src); filter(f_debug); destination(debug); }; log { source(src); filter(f_messages); destination(messages); }; log { source(src); filter(f_emergency); destination(console); }; #log { source(src); destination(console_all); }; -although this config is theoretical, it's not one I plan on using in production (hence the (all) destination). The contents of the log files in /var/log include: STATS: dropped 0 syslog-ng version 1.5.24 going down syslog-ng version 1.5.24 starting ..and not a lot else. I've tried generating alerts with the 'logger' command, as well as deliberately typing in the wrong password to su, attempting to login as root over ssh and sending lots of mail to nonexistant users on my system. No logs of any kind are generated. I don't get any errors, where do I go from here? mark

1 0

RE: [syslog-ng]Problem with syslog-ng on OpenBSD 3.5 Sparc64
by Coward, Robert (Contractor) 30 Jul '04

30 Jul '04

Here is a copy of my conf file. I also noted today that if I start the daemon by hand the error did not show up. The connection is mad to a port on localhost which is then forwarded to the main log server via stunnel. This same config works with OpenBSD 3.4 Sparc 64. options { keep_hostname(yes); sync(0); log_fifo_size(1024); stats(36000); }; source localhost { unix-dgram("/dev/log"); internal(); }; destination localhost@chrome { file("/var/log/syslog-ng.all"); }; destination loghost@phantom { tcp("localhost" port(5141)); }; filter f_no_stats { not match("STATS: dropped 0"); }; # (src + dst [+ filters] = logging) log { source(localhost); filter(f_no_stats); destination(localhost@chrome); source(localhost); filter(f_no_stats); destination(loghost@phantom); }; Its very simple no bells and whistles. --- 30 July 2004 "I fought the Dharma, and the Dharma won." (Allen Ginsberg) --- Robert V. Coward UNIX System Administrator Computer Science Corporation

1 0

Problem with syslog-ng on OpenBSD 3.5 Sparc64
by Coward, Robert (Contractor) 30 Jul '04

30 Jul '04

I recently upgraded to OpenBSD version 3.5 Sparc64. I installed syslog-ng version 1.5.24 from the OpenBSD ports tree. The install went fine and there were no errors. I substituted the line in /etc/rc that normally starts syslogd for /usr/local/sbin/syslog-ng. On boot up it starts fine. However after the system comes up all entries to the log are proceeded with the following entry: syslog-ng[18782]: io.c: sockaddr2info(): Unsupported address family 110 (addrlen=256). I did some googling and the only refernces i can find about this, concerns a kernel error in a much earlier release in OpenBSD. I've been playing with it to see if I can determine why the error comes up to no avail. Has anyone seen anything like this? --- 30 July 2004 "Theology, by diverting the attention of men from this life to another, and by endeavoring to coerce all men into one religion, constantly preaching that this world is full of misery, but the next world would be beautiful -- or not, as the case may be -- has forced on men the thought of fear where otherwise there might have been the happy abandon of nature." (Elbert Hubbard, 1856-1915) --- Robert V. Coward UNIX System Administrator Computer Science Corporation

2 1

Sudden dead
by Francisco Javier Martinez Martinez 30 Jul '04

30 Jul '04

Hello world. I had installed syslog-ng 1.4.15 & libil 0.2.23 sometime ago in a red hat 7.2 box, it works fine as central logger for varius serevers some time, but suddenly it dead. When the daemon is started it show the literal Ok, but the truth is that there is no process running, if I run /etc/rc.d/initd/syslog-ng status it told me that is stopped but that there is a PID file, I didn`t know where syslog-ng log its own activity to be able to see what is wrong, any idea? thanks in advance.

1 0

can't determine log directory with ISO-8859-1 chars
by Kerese Peter 29 Jul '04

29 Jul '04

Hello ! I got a debian sarge server logging all boxes around here using syslog-ng 1.5.15-1.1 via tcp sockets. Logfiles are determinated this way: "$HOST-$MONTH-$DAY.log". Everything works fine except one server which have LC_ALL="hu_HU" (no way to change it). This one sends su session opening events with national letters like ju'l,ma'j,etc. Logfiles are determinated this way: "$HOST-$MONTH-$DAY.log" As it seems syslog-ng can't handle it - it pushes these entries into a false logfile usually int $HOST-12-31.log. I have read the documentation,FAQ, googled (:>) it but can't find anything. Any idea,please? Regards, -- Peter dove(a)koli.rulez.org

1 0

Re: success: syslog-ng on OSX 10.3.4
by Ken Toney 27 Jul '04

27 Jul '04

On Jul 26, 2004, at 3:03 PM, OpenMacNews wrote: > you've not set your path to INCLUDE "/usr/local/bin" > > from your config.log: > > PATH: /sw/bin > PATH: /sw/sbin > PATH: /bin > PATH: /sbin > PATH: /usr/bin > PATH: /usr/sbin > > you'll need to set your ENV vars to properly reflect your dev env. > > richard Okay, so I set my ENV variables and it configured successfully. Then when I run make I error out again. This is the output. Trying to understand the output, I verified that libol is installed in /usr/local/include. Sorry for so many questions but I'm new to this. Thanks for all of you help. Ken ******************************** Making all in src make all-recursive Making all in . gcc -DHAVE_CONFIG_H -I. -I/Users/xxx/Desktop/syslog-ng-1.6.4/src -I. -W -Wno-unused -g -DYYDEBUG -Wall -I/usr/local/include/libol -D_GNU_SOURCE -c macros.c macros.c: In function `append_string': macros.c:84: warning: comparison between signed and unsigned macros.c:84: warning: signed and unsigned type in conditional expression macros.c: In function `format_tzofs': macros.c:118: error: `tm' undeclared (first use in this function) macros.c:118: error: (Each undeclared identifier is reported only once macros.c:118: error: for each function it appears in.) macros.c: In function `expand_macro': macros.c:385: warning: comparison between signed and unsigned In file included from macros.c:527: macros-gperf.c: In function `find_macro': macros-gperf.c:119: warning: missing initializer macros-gperf.c:119: warning: (near initialization for `wordlist[0].id') macros-gperf.c:119: warning: missing initializer macros-gperf.c:119: warning: (near initialization for `wordlist[1].id') macros-gperf.c:120: warning: missing initializer macros-gperf.c:120: warning: (near initialization for `wordlist[2].len') macros-gperf.c:121: warning: missing initializer macros-gperf.c:121: warning: (near initialization for `wordlist[3].id') macros-gperf.c:122: warning: missing initializer macros-gperf.c:122: warning: (near initialization for `wordlist[4].len') macros-gperf.c:123: warning: missing initializer macros-gperf.c:123: warning: (near initialization for `wordlist[5].id') macros-gperf.c:123: warning: missing initializer macros-gperf.c:123: warning: (near initialization for `wordlist[6].id') macros-gperf.c:123: warning: missing initializer macros-gperf.c:123: warning: (near initialization for `wordlist[7].id') macros-gperf.c:124: warning: missing initializer macros-gperf.c:124: warning: (near initialization for `wordlist[8].len') macros-gperf.c:125: warning: missing initializer macros-gperf.c:125: warning: (near initialization for `wordlist[9].len') macros-gperf.c:126: warning: missing initializer macros-gperf.c:126: warning: (near initialization for `wordlist[10].len') macros-gperf.c:127: warning: missing initializer macros-gperf.c:127: warning: (near initialization for `wordlist[11].id') macros-gperf.c:128: warning: missing initializer macros-gperf.c:128: warning: (near initialization for `wordlist[12].len') macros-gperf.c:129: warning: missing initializer macros-gperf.c:129: warning: (near initialization for `wordlist[13].id') macros-gperf.c:130: warning: missing initializer macros-gperf.c:130: warning: (near initialization for `wordlist[14].len') macros-gperf.c:131: warning: missing initializer macros-gperf.c:131: warning: (near initialization for `wordlist[15].len') macros-gperf.c:132: warning: missing initializer macros-gperf.c:132: warning: (near initialization for `wordlist[16].id') macros-gperf.c:133: warning: missing initializer macros-gperf.c:133: warning: (near initialization for `wordlist[17].len') macros-gperf.c:134: warning: missing initializer macros-gperf.c:134: warning: (near initialization for `wordlist[18].id') macros-gperf.c:135: warning: missing initializer macros-gperf.c:135: warning: (near initialization for `wordlist[19].len') macros-gperf.c:136: warning: missing initializer macros-gperf.c:136: warning: (near initialization for `wordlist[20].len') macros-gperf.c:137: warning: missing initializer macros-gperf.c:137: warning: (near initialization for `wordlist[21].len') macros-gperf.c:138: warning: missing initializer macros-gperf.c:138: warning: (near initialization for `wordlist[22].len') macros-gperf.c:139: warning: missing initializer macros-gperf.c:139: warning: (near initialization for `wordlist[23].len') macros-gperf.c:140: warning: missing initializer macros-gperf.c:140: warning: (near initialization for `wordlist[24].len') macros-gperf.c:141: warning: missing initializer macros-gperf.c:141: warning: (near initialization for `wordlist[25].len') macros-gperf.c:142: warning: missing initializer macros-gperf.c:142: warning: (near initialization for `wordlist[26].len') macros-gperf.c:143: warning: missing initializer macros-gperf.c:143: warning: (near initialization for `wordlist[27].id') macros-gperf.c:144: warning: missing initializer macros-gperf.c:144: warning: (near initialization for `wordlist[28].len') macros-gperf.c:145: warning: missing initializer macros-gperf.c:145: warning: (near initialization for `wordlist[29].len') macros-gperf.c:146: warning: missing initializer macros-gperf.c:146: warning: (near initialization for `wordlist[30].len') macros-gperf.c:147: warning: missing initializer macros-gperf.c:147: warning: (near initialization for `wordlist[31].len') macros-gperf.c:148: warning: missing initializer macros-gperf.c:148: warning: (near initialization for `wordlist[32].id') macros-gperf.c:149: warning: missing initializer macros-gperf.c:149: warning: (near initialization for `wordlist[33].len') macros-gperf.c:150: warning: missing initializer macros-gperf.c:150: warning: (near initialization for `wordlist[34].len') macros-gperf.c:151: warning: missing initializer macros-gperf.c:151: warning: (near initialization for `wordlist[35].len') macros-gperf.c:152: warning: missing initializer macros-gperf.c:152: warning: (near initialization for `wordlist[36].len') macros-gperf.c:153: warning: missing initializer macros-gperf.c:153: warning: (near initialization for `wordlist[37].id') macros-gperf.c:154: warning: missing initializer macros-gperf.c:154: warning: (near initialization for `wordlist[38].len') macros-gperf.c:155: warning: missing initializer macros-gperf.c:155: warning: (near initialization for `wordlist[39].len') macros-gperf.c:156: warning: missing initializer macros-gperf.c:156: warning: (near initialization for `wordlist[40].len') macros-gperf.c:157: warning: missing initializer macros-gperf.c:157: warning: (near initialization for `wordlist[41].id') macros-gperf.c:158: warning: missing initializer macros-gperf.c:158: warning: (near initialization for `wordlist[42].len') macros-gperf.c:159: warning: missing initializer macros-gperf.c:159: warning: (near initialization for `wordlist[43].len') macros-gperf.c:160: warning: missing initializer macros-gperf.c:160: warning: (near initialization for `wordlist[44].len') macros-gperf.c:161: warning: missing initializer macros-gperf.c:161: warning: (near initialization for `wordlist[45].len') macros-gperf.c:162: warning: missing initializer macros-gperf.c:162: warning: (near initialization for `wordlist[46].id') macros-gperf.c:163: warning: missing initializer macros-gperf.c:163: warning: (near initialization for `wordlist[47].len') macros-gperf.c:164: warning: missing initializer macros-gperf.c:164: warning: (near initialization for `wordlist[48].id') macros-gperf.c:165: warning: missing initializer macros-gperf.c:165: warning: (near initialization for `wordlist[49].len') macros-gperf.c:166: warning: missing initializer macros-gperf.c:166: warning: (near initialization for `wordlist[50].len') macros-gperf.c:167: warning: missing initializer macros-gperf.c:167: warning: (near initialization for `wordlist[51].id') macros-gperf.c:168: warning: missing initializer macros-gperf.c:168: warning: (near initialization for `wordlist[52].len') macros-gperf.c:169: warning: missing initializer macros-gperf.c:169: warning: (near initialization for `wordlist[53].len') macros-gperf.c:170: warning: missing initializer macros-gperf.c:170: warning: (near initialization for `wordlist[54].id') macros-gperf.c:170: warning: missing initializer macros-gperf.c:170: warning: (near initialization for `wordlist[55].id') macros-gperf.c:170: warning: missing initializer macros-gperf.c:170: warning: (near initialization for `wordlist[56].id') macros-gperf.c:171: warning: missing initializer macros-gperf.c:171: warning: (near initialization for `wordlist[57].len') macros-gperf.c:172: warning: missing initializer macros-gperf.c:172: warning: (near initialization for `wordlist[58].len') macros-gperf.c:173: warning: missing initializer macros-gperf.c:173: warning: (near initialization for `wordlist[59].id') macros-gperf.c:173: warning: missing initializer macros-gperf.c:173: warning: (near initialization for `wordlist[60].id') macros-gperf.c:173: warning: missing initializer macros-gperf.c:173: warning: (near initialization for `wordlist[61].id') macros-gperf.c:173: warning: missing initializer macros-gperf.c:173: warning: (near initialization for `wordlist[62].id') macros-gperf.c:174: warning: missing initializer macros-gperf.c:174: warning: (near initialization for `wordlist[63].len') macros-gperf.c:175: warning: missing initializer macros-gperf.c:175: warning: (near initialization for `wordlist[64].len') macros-gperf.c:176: warning: missing initializer macros-gperf.c:176: warning: (near initialization for `wordlist[65].len') macros-gperf.c:177: warning: missing initializer macros-gperf.c:177: warning: (near initialization for `wordlist[66].len') macros-gperf.c:178: warning: missing initializer macros-gperf.c:178: warning: (near initialization for `wordlist[67].id') macros-gperf.c:179: warning: missing initializer macros-gperf.c:179: warning: (near initialization for `wordlist[68].len') macros-gperf.c:180: warning: missing initializer macros-gperf.c:180: warning: (near initialization for `wordlist[69].id') macros-gperf.c:181: warning: missing initializer macros-gperf.c:181: warning: (near initialization for `wordlist[70].len') macros-gperf.c:182: warning: missing initializer macros-gperf.c:182: warning: (near initialization for `wordlist[71].len') macros-gperf.c:183: warning: missing initializer macros-gperf.c:183: warning: (near initialization for `wordlist[72].id') macros-gperf.c:184: warning: missing initializer macros-gperf.c:184: warning: (near initialization for `wordlist[73].len') macros-gperf.c:185: warning: missing initializer macros-gperf.c:185: warning: (near initialization for `wordlist[74].id') macros-gperf.c:186: warning: missing initializer macros-gperf.c:186: warning: (near initialization for `wordlist[75].len') macros-gperf.c:187: warning: missing initializer macros-gperf.c:187: warning: (near initialization for `wordlist[76].id') macros-gperf.c:187: warning: missing initializer macros-gperf.c:187: warning: (near initialization for `wordlist[77].id') macros-gperf.c:188: warning: missing initializer macros-gperf.c:188: warning: (near initialization for `wordlist[78].len') macros-gperf.c:189: warning: missing initializer macros-gperf.c:189: warning: (near initialization for `wordlist[79].id') macros-gperf.c:190: warning: missing initializer macros-gperf.c:190: warning: (near initialization for `wordlist[80].len') macros-gperf.c:191: warning: missing initializer macros-gperf.c:191: warning: (near initialization for `wordlist[81].id') macros-gperf.c:191: warning: missing initializer macros-gperf.c:191: warning: (near initialization for `wordlist[82].id') macros-gperf.c:191: warning: missing initializer macros-gperf.c:191: warning: (near initialization for `wordlist[83].id') macros-gperf.c:191: warning: missing initializer macros-gperf.c:191: warning: (near initialization for `wordlist[84].id') macros-gperf.c:192: warning: missing initializer macros-gperf.c:192: warning: (near initialization for `wordlist[85].len') macros-gperf.c:193: warning: missing initializer macros-gperf.c:193: warning: (near initialization for `wordlist[86].id') macros-gperf.c:193: warning: missing initializer macros-gperf.c:193: warning: (near initialization for `wordlist[87].id') macros-gperf.c:193: warning: missing initializer macros-gperf.c:193: warning: (near initialization for `wordlist[88].id') macros-gperf.c:193: warning: missing initializer macros-gperf.c:193: warning: (near initialization for `wordlist[89].id') macros-gperf.c:193: warning: missing initializer macros-gperf.c:193: warning: (near initialization for `wordlist[90].id') macros-gperf.c:193: warning: missing initializer macros-gperf.c:193: warning: (near initialization for `wordlist[91].id') macros-gperf.c:193: warning: missing initializer macros-gperf.c:193: warning: (near initialization for `wordlist[92].id') macros-gperf.c:193: warning: missing initializer macros-gperf.c:193: warning: (near initialization for `wordlist[93].id') macros-gperf.c:193: warning: missing initializer macros-gperf.c:193: warning: (near initialization for `wordlist[94].id') macros-gperf.c:194: warning: missing initializer macros-gperf.c:194: warning: (near initialization for `wordlist[95].id') macros-gperf.c:194: warning: missing initializer macros-gperf.c:194: warning: (near initialization for `wordlist[96].id') macros-gperf.c:194: warning: missing initializer macros-gperf.c:194: warning: (near initialization for `wordlist[97].id') macros-gperf.c:194: warning: missing initializer macros-gperf.c:194: warning: (near initialization for `wordlist[98].id') macros-gperf.c:194: warning: missing initializer macros-gperf.c:194: warning: (near initialization for `wordlist[99].id') macros-gperf.c:194: warning: missing initializer macros-gperf.c:194: warning: (near initialization for `wordlist[100].id') macros-gperf.c:194: warning: missing initializer macros-gperf.c:194: warning: (near initialization for `wordlist[101].id') macros-gperf.c:194: warning: missing initializer macros-gperf.c:194: warning: (near initialization for `wordlist[102].id') macros-gperf.c:195: warning: missing initializer macros-gperf.c:195: warning: (near initialization for `wordlist[103].len') make[3]: *** [macros.o] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive-am] Error 2 make: *** [all-recursive] Error 1

2 1

RE: [syslog-ng]syslog-ng 1.6.4 and tcp_wrappers
by Amaral, Angelo 27 Jul '04

27 Jul '04

Ted I look in my configuration: $ strings /usr/lib/libwrap.a | grep twist twist twist %s to %s twist_option: dup: %m twist_option: /bin/sh: %m twist option in resident process twist_option But in my Linux Redhat 3.1AS, tcpwrappers don´t work. Please dou you help me. Thanks, Angelo Amaral -----Original Message----- From: syslog-ng-admin(a)lists.balabit.hu [mailto:syslog-ng-admin@lists.balabit.hu]On Behalf Of Rule, Ted Sent: terça-feira, 27 de julho de 2004 10:00 To: syslog-ng(a)lists.balabit.hu Subject: RE: [syslog-ng]syslog-ng 1.6.4 and tcp_wrappers An odd thing showed up on some of my Solaris boxes the other day, which might be pertinent. Does the libwrap library definitely support :deny in the allow file? This is dependent on the library's compile time options, but may be checked with strings libwrap.so | grep twist For :deny support to exist in the library, there must be references to twist in the library. e.g.: $ strings /usr/lib/libwrap.a | grep twist twist twist option in resident process twist %s to %s twist_option: dup: %m twist_option: /bin/sh: %m twist_option $ If there are no twist references, :deny cant be used in /etc/hosts.allow, but it's much worse than that. If :deny appears in the allow file on a twistless library, the library interprets /etc/hosts.allow as if you'd said :allow. Ouch. It all boils down to use of -DPROCESS_OPTIONS at library compile time. Ted > -----Original Message----- > From: syslog-ng-admin(a)lists.balabit.hu > [mailto:syslog-ng-admin@lists.balabit.hu] On Behalf Of Amaral, Angelo > Sent: Tuesday July 27 2004 13:49 > To: syslog-ng(a)lists.balabit.hu > Subject: RE: [syslog-ng]syslog-ng 1.6.4 and tcp_wrappers > > Thanks, Musashino-shi. > > But, I don´t make syslog-ng works with tcpwrappers. > > > ************************************************************** > ******************************************* > I show how I compile my syslog-ng: > > 1- Intall libnet (libnet-1.1.2.1-2.fc2.i386.rpm) in my linux > RedHat 3.1AS. > > 2- Compile syslog-ng: > # ./configure --enable-tcp-wrapper --enable-sp > oof-source > loading cache ./config.cache > checking for a BSD compatible install... (cached) /usr/bin/install -c > checking whether build environment is sane... yes > checking whether make sets ${MAKE}... (cached) yes > checking for working aclocal-1.4... found > checking for working autoconf... found > checking for working automake-1.4... found > checking for working autoheader... found > checking for working makeinfo... found > checking whether build environment is sane... yes > checking for gcc... (cached) gcc > checking whether the C compiler (gcc ) works... yes > checking whether the C compiler (gcc ) is a cross-compiler... no > checking whether we are using GNU C... (cached) yes > checking whether gcc accepts -g... (cached) yes > checking for gcc option to accept ANSI C... (cached) none needed > checking for bison... (cached) bison -y > checking how to run the C preprocessor... (cached) gcc -E > checking for flex... (cached) flex > checking for flex... (cached) flex > checking for yywrap in -lfl... (cached) yes > checking lex output file root... (cached) lex.yy > checking whether yytext is a pointer... (cached) yes > checking whether make sets ${MAKE}... (cached) yes > checking for ANSI C header files... (cached) yes > checking for malloc.h... (cached) yes > checking for unistd.h... (cached) yes > checking for door.h... (cached) no > checking for stropts.h... (cached) yes > checking for sys/strlog.h... (cached) no > checking for stdarg.h... (cached) yes > checking for sys/klog.h... (cached) yes > checking for arpa/nameser.h... (cached) yes > checking for tcpd.h... (cached) yes > checking for working const... (cached) yes > checking whether time.h and sys/time.h may both be > included... (cached) yes > checking for modern utmp... (cached) yes > checking for global timezone variable... (cached) yes > checking size of short... (cached) 2 > checking size of int... (cached) 4 > checking size of long... (cached) 4 > checking for I_CONSLOG... (cached) no > checking for O_LARGEFILE... (cached) yes > checking for res_init in <resolv.h>... (cached) yes > checking for working alloca.h... (cached) yes > checking for alloca... (cached) yes > checking for vprintf... (cached) yes > checking for res_init in -lresolv... (cached) no > checking for __res_init in -lresolv... (cached) yes > checking for door_create in -ldoor... (cached) no > checking for socket in -lsocket... (cached) no > checking for gethostbyname in -lnsl... (cached) yes > checking for select... (cached) yes > checking for snprintf... (cached) yes > checking for vsnprintf... (cached) yes > checking for strerror... (cached) yes > checking for inet_aton... (cached) yes > checking for strncpy... (cached) yes > checking for getutent... (cached) yes > checking for getopt_long... (cached) yes > checking for strcasecmp... (cached) yes > checking for strptime... (cached) yes > checking for TCP wrapper library... (cached) -lwrap > checking whether to enable Sun STREAMS support... no > checking whether to enable Sun door support... no > checking whether to enable TCP wrapper support... yes > checking whether to enable spoof_source support... yes > checking libol version >= 0.3.13... ok > creating ./config.status > creating Makefile > creating src/Makefile > creating src/tests/Makefile > creating doc/Makefile > creating doc/sgml/Makefile > creating contrib/Makefile > creating syslog-ng.spec > creating src/config.h > src/config.h is unchanged > > 3- Look ldd: > # ldd /usr/local/sbin/syslog-ng > libnsl.so.1 => /lib/libnsl.so.1 (0xb75c7000) > libresolv.so.2 => /lib/libresolv.so.2 (0xb75b5000) > libwrap.so.0 => /usr/lib/libwrap.so.0 (0xb75ac000) > libc.so.6 => /lib/tls/libc.so.6 (0xb7475000) > /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0xb75eb000) > > ************************************************************** > ******************************************* > > And the configuration continue not working. > May you help me, please. > > Thanks. > > Angelo Amaral > > > -----Original Message----- > From: syslog-ng-admin(a)lists.balabit.hu > [mailto:syslog-ng-admin@lists.balabit.hu]On Behalf Of michihito > matsubara > Sent: sábado, 24 de julho de 2004 00:01 > To: syslog-ng(a)lists.balabit.hu > Subject: Re: [syslog-ng]syslog-ng 1.6.4 and tcp_wrappers > > > Angelo > > On Thu, 22 Jul 2004 11:10:40 -0300 > Subject: RE: [syslog-ng]syslog-ng 1.6.4 and tcp_wrappers > "Amaral, Angelo" <angelo.amaral(a)hp.com> wrote: > > Another senario. > Have you ever run ldd against syslog-ng itself? > This will show how syslog-ng linked against libwrap library or not. > > On my Linux box, > > $ ldd /sbin/syslog-ng > libnsl.so.1 => /lib/libnsl.so.1 (0x40020000) > libresolv.so.2 => /lib/libresolv.so.2 (0x40034000) > libwrap.so.0 => /usr/lib/libwrap.so.0 (0x40044000) > libnet.so.2 => /usr/lib/libnet1/libnet.so.2 (0x4004c000) > libc.so.6 => /lib/libc.so.6 (0x4005e000) > /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000) > > And, on my FreeBSD box, > > % ldd /usr/local/sbin/syslog-ng > /usr/local/sbin/syslog-ng: > libwrap.so.3 => /usr/lib/libwrap.so.3 (0x2807c000) > libc.so.4 => /usr/lib/libc.so.4 (0x28084000) > > > HTH > mitch > > > > Andrew, > > > > I put in my system, the hosts.allow below: > > > > > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > ++++++++++++++++ > > > > # hosts.allow This file describes the names of the hosts which are > > # allowed to use the local INET services, as decided > > # by the '/usr/sbin/tcpd' server. > > # > > > > in.tftpd: ALL :allow > > sshd: ALL :allow > > ALL: ALL :deny > > > > > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > ++++++++++++++++ > > > > And the configuration continue not working. > > May you help me, please. > > > > Thanks. > > -- > Musashino-shi, Tokyo, Japan > K12LTSP in Japanese ; http://open-mitch.dyndns.org/k12ltsp/ > > _______________________________________________ > syslog-ng maillist - syslog-ng(a)lists.balabit.hu > https://lists.balabit.hu/mailman/listinfo/syslog-ng > Frequently asked questions at http://www.campin.net/syslog-ng/faq.html > > _______________________________________________ > syslog-ng maillist - syslog-ng(a)lists.balabit.hu > https://lists.balabit.hu/mailman/listinfo/syslog-ng > Frequently asked questions at http://www.campin.net/syslog-ng/faq.html > > > ************************************************************************************************ This E-mail message, including any attachments, is intended only for the person or entity to which it is addressed, and may contain confidential information. If you are not the intended recipient, any review, retransmission, disclosure, copying, modification or other use of this E-mail message or attachments is strictly forbidden. If you have received this E-mail message in error, please contact the author and delete the message and any attachments from your computer. You are also advised that the views and opinions expressed in this E-mail message and any attachments are the author's own, and may not reflect the views and opinions of FLEXTECH Television Limited. ************************************************************************************************ _______________________________________________ syslog-ng maillist - syslog-ng(a)lists.balabit.hu https://lists.balabit.hu/mailman/listinfo/syslog-ng Frequently asked questions at http://www.campin.net/syslog-ng/faq.html

1 0

RE: [syslog-ng]syslog-ng 1.6.4 and tcp_wrappers
by Rule, Ted 27 Jul '04

27 Jul '04

An odd thing showed up on some of my Solaris boxes the other day, which might be pertinent. Does the libwrap library definitely support :deny in the allow file? This is dependent on the library's compile time options, but may be checked with strings libwrap.so | grep twist For :deny support to exist in the library, there must be references to twist in the library. e.g.: $ strings /usr/lib/libwrap.a | grep twist twist twist option in resident process twist %s to %s twist_option: dup: %m twist_option: /bin/sh: %m twist_option $ If there are no twist references, :deny cant be used in /etc/hosts.allow, but it's much worse than that. If :deny appears in the allow file on a twistless library, the library interprets /etc/hosts.allow as if you'd said :allow. Ouch. It all boils down to use of -DPROCESS_OPTIONS at library compile time. Ted > -----Original Message----- > From: syslog-ng-admin(a)lists.balabit.hu > [mailto:syslog-ng-admin@lists.balabit.hu] On Behalf Of Amaral, Angelo > Sent: Tuesday July 27 2004 13:49 > To: syslog-ng(a)lists.balabit.hu > Subject: RE: [syslog-ng]syslog-ng 1.6.4 and tcp_wrappers > > Thanks, Musashino-shi. > > But, I don´t make syslog-ng works with tcpwrappers. > > > ************************************************************** > ******************************************* > I show how I compile my syslog-ng: > > 1- Intall libnet (libnet-1.1.2.1-2.fc2.i386.rpm) in my linux > RedHat 3.1AS. > > 2- Compile syslog-ng: > # ./configure --enable-tcp-wrapper --enable-sp > oof-source > loading cache ./config.cache > checking for a BSD compatible install... (cached) /usr/bin/install -c > checking whether build environment is sane... yes > checking whether make sets ${MAKE}... (cached) yes > checking for working aclocal-1.4... found > checking for working autoconf... found > checking for working automake-1.4... found > checking for working autoheader... found > checking for working makeinfo... found > checking whether build environment is sane... yes > checking for gcc... (cached) gcc > checking whether the C compiler (gcc ) works... yes > checking whether the C compiler (gcc ) is a cross-compiler... no > checking whether we are using GNU C... (cached) yes > checking whether gcc accepts -g... (cached) yes > checking for gcc option to accept ANSI C... (cached) none needed > checking for bison... (cached) bison -y > checking how to run the C preprocessor... (cached) gcc -E > checking for flex... (cached) flex > checking for flex... (cached) flex > checking for yywrap in -lfl... (cached) yes > checking lex output file root... (cached) lex.yy > checking whether yytext is a pointer... (cached) yes > checking whether make sets ${MAKE}... (cached) yes > checking for ANSI C header files... (cached) yes > checking for malloc.h... (cached) yes > checking for unistd.h... (cached) yes > checking for door.h... (cached) no > checking for stropts.h... (cached) yes > checking for sys/strlog.h... (cached) no > checking for stdarg.h... (cached) yes > checking for sys/klog.h... (cached) yes > checking for arpa/nameser.h... (cached) yes > checking for tcpd.h... (cached) yes > checking for working const... (cached) yes > checking whether time.h and sys/time.h may both be > included... (cached) yes > checking for modern utmp... (cached) yes > checking for global timezone variable... (cached) yes > checking size of short... (cached) 2 > checking size of int... (cached) 4 > checking size of long... (cached) 4 > checking for I_CONSLOG... (cached) no > checking for O_LARGEFILE... (cached) yes > checking for res_init in <resolv.h>... (cached) yes > checking for working alloca.h... (cached) yes > checking for alloca... (cached) yes > checking for vprintf... (cached) yes > checking for res_init in -lresolv... (cached) no > checking for __res_init in -lresolv... (cached) yes > checking for door_create in -ldoor... (cached) no > checking for socket in -lsocket... (cached) no > checking for gethostbyname in -lnsl... (cached) yes > checking for select... (cached) yes > checking for snprintf... (cached) yes > checking for vsnprintf... (cached) yes > checking for strerror... (cached) yes > checking for inet_aton... (cached) yes > checking for strncpy... (cached) yes > checking for getutent... (cached) yes > checking for getopt_long... (cached) yes > checking for strcasecmp... (cached) yes > checking for strptime... (cached) yes > checking for TCP wrapper library... (cached) -lwrap > checking whether to enable Sun STREAMS support... no > checking whether to enable Sun door support... no > checking whether to enable TCP wrapper support... yes > checking whether to enable spoof_source support... yes > checking libol version >= 0.3.13... ok > creating ./config.status > creating Makefile > creating src/Makefile > creating src/tests/Makefile > creating doc/Makefile > creating doc/sgml/Makefile > creating contrib/Makefile > creating syslog-ng.spec > creating src/config.h > src/config.h is unchanged > > 3- Look ldd: > # ldd /usr/local/sbin/syslog-ng > libnsl.so.1 => /lib/libnsl.so.1 (0xb75c7000) > libresolv.so.2 => /lib/libresolv.so.2 (0xb75b5000) > libwrap.so.0 => /usr/lib/libwrap.so.0 (0xb75ac000) > libc.so.6 => /lib/tls/libc.so.6 (0xb7475000) > /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0xb75eb000) > > ************************************************************** > ******************************************* > > And the configuration continue not working. > May you help me, please. > > Thanks. > > Angelo Amaral > > > -----Original Message----- > From: syslog-ng-admin(a)lists.balabit.hu > [mailto:syslog-ng-admin@lists.balabit.hu]On Behalf Of michihito > matsubara > Sent: sábado, 24 de julho de 2004 00:01 > To: syslog-ng(a)lists.balabit.hu > Subject: Re: [syslog-ng]syslog-ng 1.6.4 and tcp_wrappers > > > Angelo > > On Thu, 22 Jul 2004 11:10:40 -0300 > Subject: RE: [syslog-ng]syslog-ng 1.6.4 and tcp_wrappers > "Amaral, Angelo" <angelo.amaral(a)hp.com> wrote: > > Another senario. > Have you ever run ldd against syslog-ng itself? > This will show how syslog-ng linked against libwrap library or not. > > On my Linux box, > > $ ldd /sbin/syslog-ng > libnsl.so.1 => /lib/libnsl.so.1 (0x40020000) > libresolv.so.2 => /lib/libresolv.so.2 (0x40034000) > libwrap.so.0 => /usr/lib/libwrap.so.0 (0x40044000) > libnet.so.2 => /usr/lib/libnet1/libnet.so.2 (0x4004c000) > libc.so.6 => /lib/libc.so.6 (0x4005e000) > /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000) > > And, on my FreeBSD box, > > % ldd /usr/local/sbin/syslog-ng > /usr/local/sbin/syslog-ng: > libwrap.so.3 => /usr/lib/libwrap.so.3 (0x2807c000) > libc.so.4 => /usr/lib/libc.so.4 (0x28084000) > > > HTH > mitch > > > > Andrew, > > > > I put in my system, the hosts.allow below: > > > > > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > ++++++++++++++++ > > > > # hosts.allow This file describes the names of the hosts which are > > # allowed to use the local INET services, as decided > > # by the '/usr/sbin/tcpd' server. > > # > > > > in.tftpd: ALL :allow > > sshd: ALL :allow > > ALL: ALL :deny > > > > > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > ++++++++++++++++ > > > > And the configuration continue not working. > > May you help me, please. > > > > Thanks. > > -- > Musashino-shi, Tokyo, Japan > K12LTSP in Japanese ; http://open-mitch.dyndns.org/k12ltsp/ > > _______________________________________________ > syslog-ng maillist - syslog-ng(a)lists.balabit.hu > https://lists.balabit.hu/mailman/listinfo/syslog-ng > Frequently asked questions at http://www.campin.net/syslog-ng/faq.html > > _______________________________________________ > syslog-ng maillist - syslog-ng(a)lists.balabit.hu > https://lists.balabit.hu/mailman/listinfo/syslog-ng > Frequently asked questions at http://www.campin.net/syslog-ng/faq.html > > > ************************************************************************************************ This E-mail message, including any attachments, is intended only for the person or entity to which it is addressed, and may contain confidential information. If you are not the intended recipient, any review, retransmission, disclosure, copying, modification or other use of this E-mail message or attachments is strictly forbidden. If you have received this E-mail message in error, please contact the author and delete the message and any attachments from your computer. You are also advised that the views and opinions expressed in this E-mail message and any attachments are the author's own, and may not reflect the views and opinions of FLEXTECH Television Limited. ************************************************************************************************

1 0

RE: [syslog-ng]syslog-ng 1.6.4 and tcp_wrappers
by Amaral, Angelo 27 Jul '04

27 Jul '04

Thanks, Musashino-shi. But, I don´t make syslog-ng works with tcpwrappers. ********************************************************************************************************* I show how I compile my syslog-ng: 1- Intall libnet (libnet-1.1.2.1-2.fc2.i386.rpm) in my linux RedHat 3.1AS. 2- Compile syslog-ng: # ./configure --enable-tcp-wrapper --enable-sp oof-source loading cache ./config.cache checking for a BSD compatible install... (cached) /usr/bin/install -c checking whether build environment is sane... yes checking whether make sets ${MAKE}... (cached) yes checking for working aclocal-1.4... found checking for working autoconf... found checking for working automake-1.4... found checking for working autoheader... found checking for working makeinfo... found checking whether build environment is sane... yes checking for gcc... (cached) gcc checking whether the C compiler (gcc ) works... yes checking whether the C compiler (gcc ) is a cross-compiler... no checking whether we are using GNU C... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ANSI C... (cached) none needed checking for bison... (cached) bison -y checking how to run the C preprocessor... (cached) gcc -E checking for flex... (cached) flex checking for flex... (cached) flex checking for yywrap in -lfl... (cached) yes checking lex output file root... (cached) lex.yy checking whether yytext is a pointer... (cached) yes checking whether make sets ${MAKE}... (cached) yes checking for ANSI C header files... (cached) yes checking for malloc.h... (cached) yes checking for unistd.h... (cached) yes checking for door.h... (cached) no checking for stropts.h... (cached) yes checking for sys/strlog.h... (cached) no checking for stdarg.h... (cached) yes checking for sys/klog.h... (cached) yes checking for arpa/nameser.h... (cached) yes checking for tcpd.h... (cached) yes checking for working const... (cached) yes checking whether time.h and sys/time.h may both be included... (cached) yes checking for modern utmp... (cached) yes checking for global timezone variable... (cached) yes checking size of short... (cached) 2 checking size of int... (cached) 4 checking size of long... (cached) 4 checking for I_CONSLOG... (cached) no checking for O_LARGEFILE... (cached) yes checking for res_init in <resolv.h>... (cached) yes checking for working alloca.h... (cached) yes checking for alloca... (cached) yes checking for vprintf... (cached) yes checking for res_init in -lresolv... (cached) no checking for __res_init in -lresolv... (cached) yes checking for door_create in -ldoor... (cached) no checking for socket in -lsocket... (cached) no checking for gethostbyname in -lnsl... (cached) yes checking for select... (cached) yes checking for snprintf... (cached) yes checking for vsnprintf... (cached) yes checking for strerror... (cached) yes checking for inet_aton... (cached) yes checking for strncpy... (cached) yes checking for getutent... (cached) yes checking for getopt_long... (cached) yes checking for strcasecmp... (cached) yes checking for strptime... (cached) yes checking for TCP wrapper library... (cached) -lwrap checking whether to enable Sun STREAMS support... no checking whether to enable Sun door support... no checking whether to enable TCP wrapper support... yes checking whether to enable spoof_source support... yes checking libol version >= 0.3.13... ok creating ./config.status creating Makefile creating src/Makefile creating src/tests/Makefile creating doc/Makefile creating doc/sgml/Makefile creating contrib/Makefile creating syslog-ng.spec creating src/config.h src/config.h is unchanged 3- Look ldd: # ldd /usr/local/sbin/syslog-ng libnsl.so.1 => /lib/libnsl.so.1 (0xb75c7000) libresolv.so.2 => /lib/libresolv.so.2 (0xb75b5000) libwrap.so.0 => /usr/lib/libwrap.so.0 (0xb75ac000) libc.so.6 => /lib/tls/libc.so.6 (0xb7475000) /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0xb75eb000) ********************************************************************************************************* And the configuration continue not working. May you help me, please. Thanks. Angelo Amaral -----Original Message----- From: syslog-ng-admin(a)lists.balabit.hu [mailto:syslog-ng-admin@lists.balabit.hu]On Behalf Of michihito matsubara Sent: sábado, 24 de julho de 2004 00:01 To: syslog-ng(a)lists.balabit.hu Subject: Re: [syslog-ng]syslog-ng 1.6.4 and tcp_wrappers Angelo On Thu, 22 Jul 2004 11:10:40 -0300 Subject: RE: [syslog-ng]syslog-ng 1.6.4 and tcp_wrappers "Amaral, Angelo" <angelo.amaral(a)hp.com> wrote: Another senario. Have you ever run ldd against syslog-ng itself? This will show how syslog-ng linked against libwrap library or not. On my Linux box, $ ldd /sbin/syslog-ng libnsl.so.1 => /lib/libnsl.so.1 (0x40020000) libresolv.so.2 => /lib/libresolv.so.2 (0x40034000) libwrap.so.0 => /usr/lib/libwrap.so.0 (0x40044000) libnet.so.2 => /usr/lib/libnet1/libnet.so.2 (0x4004c000) libc.so.6 => /lib/libc.so.6 (0x4005e000) /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000) And, on my FreeBSD box, % ldd /usr/local/sbin/syslog-ng /usr/local/sbin/syslog-ng: libwrap.so.3 => /usr/lib/libwrap.so.3 (0x2807c000) libc.so.4 => /usr/lib/libc.so.4 (0x28084000) HTH mitch > Andrew, > > I put in my system, the hosts.allow below: > > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > # hosts.allow This file describes the names of the hosts which are > # allowed to use the local INET services, as decided > # by the '/usr/sbin/tcpd' server. > # > > in.tftpd: ALL :allow > sshd: ALL :allow > ALL: ALL :deny > > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > And the configuration continue not working. > May you help me, please. > > Thanks. -- Musashino-shi, Tokyo, Japan K12LTSP in Japanese ; http://open-mitch.dyndns.org/k12ltsp/ _______________________________________________ syslog-ng maillist - syslog-ng(a)lists.balabit.hu https://lists.balabit.hu/mailman/listinfo/syslog-ng Frequently asked questions at http://www.campin.net/syslog-ng/faq.html

1 0