[zorp] Zorp slows down web page viewing?
Balazs Scheidler
zorp@lists.balabit.hu
Wed, 04 May 2005 15:44:57 +0200
On Tue, 2005-05-03 at 11:08 -0700, Joseph Kim wrote:
> Thank you for your reply.
>
> "Slow" means the following:
> For the same webpage, without Zorp, it takes about a second to display. But,
> with Zorp, it takes about 20 seconds to display. I understand that Zorp
> would some latency, but not to this extent.
> So I thought there should be something wrong.
Yes, this latency is too much.
>
> Configuration is like the following:
> (1) Zorp machine is configured as a bridge mode with a bridge (br0) IP
> address 192.168.11.101. Currently, both eth2 and eth3 are added to the
> bridge. And Zorp is running.
> (2) Client notebook's IP address is 192.168.11.13, and is connected to eth2
> of the Zorp machine.
> (3) Eth3 of Zorp machine is connected to our Internet Gateway Router (IP
> address 192.168.11.1) through which it can go to the internet.
>
> The file instances.conf includes the following line:
> zorp --verbose=10 --policy /usr/local/etc/zorp/policy.py --autobind-ip
> 1.2.3.4
I think I've found the problem, --verbose=10 generates a _LOT_ of
messages to your system log, try with the default value of 3 which is
more sensible.
--
Bazsi