[syslog-ng] syslog-ng 3.5
Rodney Bizzell
hardworker30 at gmail.com
Thu Oct 11 19:54:43 UTC 2018
I will retest my config
On Thu, Oct 11, 2018, 3:41 PM Salih Haji <salihhaji631 at gmail.com> wrote:
> Really?
>
> On Thu, 11 Oct 2018, 22:38 Rodney Bizzell, <hardworker30 at gmail.com> wrote:
>
>> Should I make a change to the config
>>
>> On Thu, Oct 11, 2018, 3:25 PM Szemere, László <
>> laszlo.szemere at oneidentity.com> wrote:
>>
>>> Dear Rodney Bizzell,
>>> I started a freshly built syslog-ng from the latest revision from the
>>> OSE master with your config (I used dbld for this.), and it immediatelly
>>> pointed out one syntax error:
>>>
>>> Error parsing afsocket, inner-dest plugin spoof_sources not found in
>>> /source/syslog-ng.conf:
>>> 45
>>> 46
>>> 47 destination d_graylog {
>>> 48 tcp("0.0.0.0"
>>> 49 port (12201)
>>> 50----> spoof_sources(yes)
>>> 50----> ^^^^^^^^^^^^^
>>> 51 );
>>> 52 };
>>> 53
>>> 54
>>> 55 filter f_kernel { facility(kern); };
>>>
>>> Since you did not provided any error message/output from your instance,
>>> I can not investigate it any further currently.
>>>
>>> If you encounter any other issue, please try to provide as many
>>> information as you can. Including at least the:
>>> - platform
>>> - syslog-ng version
>>> - installation source (custom built, OBS repository, etc...)
>>> - configuration
>>> - output from syslog-ng
>>> - network setup (if the problem can not be reproduced with the loopback
>>> interface only)
>>>
>>>
>>> Br,
>>> Laci
>>>
>>>
>>>
>>> On Thu, Oct 11, 2018 at 6:01 PM, Rodney Bizzell <hardworker30 at gmail.com>
>>> wrote:
>>>
>>>> Ok I have 3.5 syslog-ng
>>>>
>>>> On Thu, Oct 11, 2018, 10:43 AM Szemere, László <
>>>> laszlo.szemere at oneidentity.com> wrote:
>>>>
>>>>> Dear Rodney Bizzel,
>>>>>
>>>>> if you start syslog-ng with the following options:
>>>>> -F (foreground)
>>>>> -d (debug)
>>>>> -e (stderr)
>>>>> -v (verbose)
>>>>> it will provide a verbosed information during the startup. It will
>>>>> help a lot to figure out the root cause of the problem.
>>>>>
>>>>> Note: If you have the option to update your syslog-ng version: Since
>>>>> 3.15.1 (PR: https://github.com/balabit/syslog-ng/pull/1932) syslog-ng
>>>>> will point out the exact location of syntax errors.
>>>>>
>>>>>
>>>>> Br,
>>>>> Laci
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Thu, Oct 11, 2018 at 3:38 PM, Rodney Bizzell <
>>>>> hardworker30 at gmail.com> wrote:
>>>>>
>>>>>> It isn't starting up at all once I add those changes to the config it
>>>>>> says invalid syntax
>>>>>>
>>>>>>
>>>>>> On Thu, Oct 11, 2018 at 9:22 AM Szemere, László <
>>>>>> laszlo.szemere at oneidentity.com> wrote:
>>>>>>
>>>>>>> Dear Rodney Bizzell,
>>>>>>> sorry for the misunderstanding, now it is clear for us, that you
>>>>>>> anonymised your config. just a note: it is preferable to use different
>>>>>>> masking addresses for different original IP's. i.e.: I can not check this
>>>>>>> source: "udp(ip(0.0.0.0) port(514));"
>>>>>>>
>>>>>>> Back to your problem. It is not clear for me what do you mean by
>>>>>>> "once changes are made syslog-ng is failing"
>>>>>>> It is not starting up at all? Or just not forwarding logs to your
>>>>>>> Graylog server?
>>>>>>>
>>>>>>> Br,
>>>>>>> Laci
>>>>>>>
>>>>>>>
>>>>>>> On Thu, Oct 11, 2018 at 2:03 PM, Rodney Bizzell <
>>>>>>> hardworker30 at gmail.com> wrote:
>>>>>>>
>>>>>>>> I just changed my information on my graylog box 0.0.0.0 isn't what
>>>>>>>> I had in there. The way the config is did that look syntax correctly
>>>>>>>>
>>>>>>>> On Thu, Oct 11, 2018, 12:26 AM Péter, Kókai <
>>>>>>>> peter.kokai at oneidentity.com> wrote:
>>>>>>>>
>>>>>>>>> Hello,
>>>>>>>>>
>>>>>>>>> If you starg syslogng with -Fe it might give you a clue.
>>>>>>>>> Also 0.0.0.0 is a no - routable address, so it is fine for source,
>>>>>>>>> not so much for destination, you should check out on which ip graylog
>>>>>>>>> listening, if it is 0.0.0.0 you could use the loopback device 120.0.0.1 (or
>>>>>>>>> other valid ip, but lo would be preferable).
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Kokan
>>>>>>>>>
>>>>>>>>> On Wed, 10 Oct 2018, 10:57 pm Rodney Bizzell, <
>>>>>>>>> hardworker30 at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> I have install syslog-ng 3.5 and I am configuring it to send all
>>>>>>>>>> logs to Graylog but once changes are made syslog-ng is failing. I change
>>>>>>>>>> the address of graylog server to 0.0.0.0
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> @version:3.5
>>>>>>>>>> @include "scl.conf"
>>>>>>>>>>
>>>>>>>>>> # syslog-ng configuration file.
>>>>>>>>>> #
>>>>>>>>>> # This should behave pretty much like the original syslog on
>>>>>>>>>> RedHat. But
>>>>>>>>>> # it could be configured a lot smarter.
>>>>>>>>>> #
>>>>>>>>>> # See syslog-ng(8) and syslog-ng.conf(5) for more information.
>>>>>>>>>> #
>>>>>>>>>> # Note: it also sources additional configuration files (*.conf)
>>>>>>>>>> # located in /etc/syslog-ng/conf.d/
>>>>>>>>>>
>>>>>>>>>> options {
>>>>>>>>>> flush_lines (0);
>>>>>>>>>> time_reopen (10);
>>>>>>>>>> log_fifo_size (1000);
>>>>>>>>>> chain_hostnames (off);
>>>>>>>>>> use_dns (no);
>>>>>>>>>> use_fqdn (no);
>>>>>>>>>> create_dirs (no);
>>>>>>>>>> keep_hostname (yes);
>>>>>>>>>> };
>>>>>>>>>>
>>>>>>>>>> source s_sys {
>>>>>>>>>> system();
>>>>>>>>>> internal();
>>>>>>>>>> udp(ip(0.0.0.0) port(514));
>>>>>>>>>> };
>>>>>>>>>>
>>>>>>>>>> source s_net {
>>>>>>>>>> udp(ip(0.0.0.0) port(514));
>>>>>>>>>> tcp(ip(0.0.0.0) port(514) max-connections(256));
>>>>>>>>>> };
>>>>>>>>>>
>>>>>>>>>> destination d_cons { file("/dev/console"); };
>>>>>>>>>> destination d_mesg { file("/var/log/messages"); };
>>>>>>>>>> destination d_auth { file("/var/log/secure"); };
>>>>>>>>>> destination d_mail { file("/var/log/maillog" flush_lines(10)); };
>>>>>>>>>> destination d_spol { file("/var/log/spooler"); };
>>>>>>>>>> destination d_boot { file("/var/log/boot.log"); };
>>>>>>>>>> destination d_cron { file("/var/log/cron"); };
>>>>>>>>>> destination d_kern { file("/var/log/kern"); };
>>>>>>>>>> destination d_mlal { usertty("*"); };
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> destination d_graylog {
>>>>>>>>>> tcp("0.0.0.0"
>>>>>>>>>> port (12201)
>>>>>>>>>> spoof_sources(yes)
>>>>>>>>>> );
>>>>>>>>>> };
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> filter f_kernel { facility(kern); };
>>>>>>>>>> filter f_default { level(info..emerg) and
>>>>>>>>>> not (facility(mail)
>>>>>>>>>> or facility(authpriv)
>>>>>>>>>> or facility(cron)); };
>>>>>>>>>> filter f_auth { facility(authpriv); };
>>>>>>>>>> filter f_mail { facility(mail); };
>>>>>>>>>> filter f_emergency { level(emerg); };
>>>>>>>>>> filter f_news { facility(uucp) or
>>>>>>>>>> (facility(news)
>>>>>>>>>> and level(crit..emerg)); };
>>>>>>>>>> filter f_boot { facility(local7); };
>>>>>>>>>> filter f_cron { facility(cron); };
>>>>>>>>>>
>>>>>>>>>> #log { source(s_sys); filter(f_kernel); destination(d_cons); };
>>>>>>>>>> log { source(s_sys); filter(f_kernel); destination(d_kern); };
>>>>>>>>>> log { source(s_sys); filter(f_default); destination(d_mesg); };
>>>>>>>>>> log { source(s_sys); filter(f_auth); destination(d_auth); };
>>>>>>>>>> log { source(s_sys); filter(f_mail); destination(d_mail); };
>>>>>>>>>> log { source(s_sys); filter(f_emergency); destination(d_mlal); };
>>>>>>>>>> log { source(s_sys); filter(f_news); destination(d_spol); };
>>>>>>>>>> log { source(s_sys); filter(f_boot); destination(d_boot); };
>>>>>>>>>> log { source(s_sys); filter(f_cron); destination(d_cron); };
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> log { source(s_net); destination(d_graylog); };
>>>>>>>>>> log { source(s_sys); filter(f_default); destination(d_graylog);};
>>>>>>>>>>
>>>>>>>>>> # Source additional configuration files (.conf extension only)
>>>>>>>>>> @include "/etc/syslog-ng/conf.d/*.conf"
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> # vim:ft=syslog-ng:ai:si:ts=4:sw=4:et:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ______________________________________________________________________________
>>>>>>>>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>>>>>>>>> Documentation:
>>>>>>>>>> http://www.balabit.com/support/documentation/?product=syslog-ng
>>>>>>>>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>> ______________________________________________________________________________
>>>>>>>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>>>>>>>> Documentation:
>>>>>>>>> http://www.balabit.com/support/documentation/?product=syslog-ng
>>>>>>>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> ______________________________________________________________________________
>>>>>>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>>>>>>> Documentation:
>>>>>>>> http://www.balabit.com/support/documentation/?product=syslog-ng
>>>>>>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> ______________________________________________________________________________
>>>>>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>>>>>> Documentation:
>>>>>>> http://www.balabit.com/support/documentation/?product=syslog-ng
>>>>>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> ______________________________________________________________________________
>>>>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>>>>> Documentation:
>>>>>> http://www.balabit.com/support/documentation/?product=syslog-ng
>>>>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>> ______________________________________________________________________________
>>>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>>>> Documentation:
>>>>> http://www.balabit.com/support/documentation/?product=syslog-ng
>>>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>>>
>>>>>
>>>>
>>>> ______________________________________________________________________________
>>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>>> Documentation:
>>>> http://www.balabit.com/support/documentation/?product=syslog-ng
>>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>>
>>>>
>>>>
>>>
>>> ______________________________________________________________________________
>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>> Documentation:
>>> http://www.balabit.com/support/documentation/?product=syslog-ng
>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>
>>>
>> ______________________________________________________________________________
>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>> Documentation:
>> http://www.balabit.com/support/documentation/?product=syslog-ng
>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>
>>
> ______________________________________________________________________________
> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
> Documentation:
> http://www.balabit.com/support/documentation/?product=syslog-ng
> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.balabit.hu/pipermail/syslog-ng/attachments/20181011/93d4c652/attachment-0001.html>
More information about the syslog-ng
mailing list