[syslog-ng] syslog-ng 3.5
Salih Haji
salihhaji631 at gmail.com
Thu Oct 11 19:40:57 UTC 2018
Really?
On Thu, 11 Oct 2018, 22:38 Rodney Bizzell, <hardworker30 at gmail.com> wrote:
> Should I make a change to the config
>
> On Thu, Oct 11, 2018, 3:25 PM Szemere, László <
> laszlo.szemere at oneidentity.com> wrote:
>
>> Dear Rodney Bizzell,
>> I started a freshly built syslog-ng from the latest revision from the
>> OSE master with your config (I used dbld for this.), and it immediatelly
>> pointed out one syntax error:
>>
>> Error parsing afsocket, inner-dest plugin spoof_sources not found in
>> /source/syslog-ng.conf:
>> 45
>> 46
>> 47 destination d_graylog {
>> 48 tcp("0.0.0.0"
>> 49 port (12201)
>> 50----> spoof_sources(yes)
>> 50----> ^^^^^^^^^^^^^
>> 51 );
>> 52 };
>> 53
>> 54
>> 55 filter f_kernel { facility(kern); };
>>
>> Since you did not provided any error message/output from your instance, I
>> can not investigate it any further currently.
>>
>> If you encounter any other issue, please try to provide as many
>> information as you can. Including at least the:
>> - platform
>> - syslog-ng version
>> - installation source (custom built, OBS repository, etc...)
>> - configuration
>> - output from syslog-ng
>> - network setup (if the problem can not be reproduced with the loopback
>> interface only)
>>
>>
>> Br,
>> Laci
>>
>>
>>
>> On Thu, Oct 11, 2018 at 6:01 PM, Rodney Bizzell <hardworker30 at gmail.com>
>> wrote:
>>
>>> Ok I have 3.5 syslog-ng
>>>
>>> On Thu, Oct 11, 2018, 10:43 AM Szemere, László <
>>> laszlo.szemere at oneidentity.com> wrote:
>>>
>>>> Dear Rodney Bizzel,
>>>>
>>>> if you start syslog-ng with the following options:
>>>> -F (foreground)
>>>> -d (debug)
>>>> -e (stderr)
>>>> -v (verbose)
>>>> it will provide a verbosed information during the startup. It will help
>>>> a lot to figure out the root cause of the problem.
>>>>
>>>> Note: If you have the option to update your syslog-ng version: Since
>>>> 3.15.1 (PR: https://github.com/balabit/syslog-ng/pull/1932) syslog-ng
>>>> will point out the exact location of syntax errors.
>>>>
>>>>
>>>> Br,
>>>> Laci
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On Thu, Oct 11, 2018 at 3:38 PM, Rodney Bizzell <hardworker30 at gmail.com
>>>> > wrote:
>>>>
>>>>> It isn't starting up at all once I add those changes to the config it
>>>>> says invalid syntax
>>>>>
>>>>>
>>>>> On Thu, Oct 11, 2018 at 9:22 AM Szemere, László <
>>>>> laszlo.szemere at oneidentity.com> wrote:
>>>>>
>>>>>> Dear Rodney Bizzell,
>>>>>> sorry for the misunderstanding, now it is clear for us, that you
>>>>>> anonymised your config. just a note: it is preferable to use different
>>>>>> masking addresses for different original IP's. i.e.: I can not check this
>>>>>> source: "udp(ip(0.0.0.0) port(514));"
>>>>>>
>>>>>> Back to your problem. It is not clear for me what do you mean by
>>>>>> "once changes are made syslog-ng is failing"
>>>>>> It is not starting up at all? Or just not forwarding logs to your
>>>>>> Graylog server?
>>>>>>
>>>>>> Br,
>>>>>> Laci
>>>>>>
>>>>>>
>>>>>> On Thu, Oct 11, 2018 at 2:03 PM, Rodney Bizzell <
>>>>>> hardworker30 at gmail.com> wrote:
>>>>>>
>>>>>>> I just changed my information on my graylog box 0.0.0.0 isn't what I
>>>>>>> had in there. The way the config is did that look syntax correctly
>>>>>>>
>>>>>>> On Thu, Oct 11, 2018, 12:26 AM Péter, Kókai <
>>>>>>> peter.kokai at oneidentity.com> wrote:
>>>>>>>
>>>>>>>> Hello,
>>>>>>>>
>>>>>>>> If you starg syslogng with -Fe it might give you a clue.
>>>>>>>> Also 0.0.0.0 is a no - routable address, so it is fine for source,
>>>>>>>> not so much for destination, you should check out on which ip graylog
>>>>>>>> listening, if it is 0.0.0.0 you could use the loopback device 120.0.0.1 (or
>>>>>>>> other valid ip, but lo would be preferable).
>>>>>>>>
>>>>>>>> --
>>>>>>>> Kokan
>>>>>>>>
>>>>>>>> On Wed, 10 Oct 2018, 10:57 pm Rodney Bizzell, <
>>>>>>>> hardworker30 at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> I have install syslog-ng 3.5 and I am configuring it to send all
>>>>>>>>> logs to Graylog but once changes are made syslog-ng is failing. I change
>>>>>>>>> the address of graylog server to 0.0.0.0
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> @version:3.5
>>>>>>>>> @include "scl.conf"
>>>>>>>>>
>>>>>>>>> # syslog-ng configuration file.
>>>>>>>>> #
>>>>>>>>> # This should behave pretty much like the original syslog on
>>>>>>>>> RedHat. But
>>>>>>>>> # it could be configured a lot smarter.
>>>>>>>>> #
>>>>>>>>> # See syslog-ng(8) and syslog-ng.conf(5) for more information.
>>>>>>>>> #
>>>>>>>>> # Note: it also sources additional configuration files (*.conf)
>>>>>>>>> # located in /etc/syslog-ng/conf.d/
>>>>>>>>>
>>>>>>>>> options {
>>>>>>>>> flush_lines (0);
>>>>>>>>> time_reopen (10);
>>>>>>>>> log_fifo_size (1000);
>>>>>>>>> chain_hostnames (off);
>>>>>>>>> use_dns (no);
>>>>>>>>> use_fqdn (no);
>>>>>>>>> create_dirs (no);
>>>>>>>>> keep_hostname (yes);
>>>>>>>>> };
>>>>>>>>>
>>>>>>>>> source s_sys {
>>>>>>>>> system();
>>>>>>>>> internal();
>>>>>>>>> udp(ip(0.0.0.0) port(514));
>>>>>>>>> };
>>>>>>>>>
>>>>>>>>> source s_net {
>>>>>>>>> udp(ip(0.0.0.0) port(514));
>>>>>>>>> tcp(ip(0.0.0.0) port(514) max-connections(256));
>>>>>>>>> };
>>>>>>>>>
>>>>>>>>> destination d_cons { file("/dev/console"); };
>>>>>>>>> destination d_mesg { file("/var/log/messages"); };
>>>>>>>>> destination d_auth { file("/var/log/secure"); };
>>>>>>>>> destination d_mail { file("/var/log/maillog" flush_lines(10)); };
>>>>>>>>> destination d_spol { file("/var/log/spooler"); };
>>>>>>>>> destination d_boot { file("/var/log/boot.log"); };
>>>>>>>>> destination d_cron { file("/var/log/cron"); };
>>>>>>>>> destination d_kern { file("/var/log/kern"); };
>>>>>>>>> destination d_mlal { usertty("*"); };
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> destination d_graylog {
>>>>>>>>> tcp("0.0.0.0"
>>>>>>>>> port (12201)
>>>>>>>>> spoof_sources(yes)
>>>>>>>>> );
>>>>>>>>> };
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> filter f_kernel { facility(kern); };
>>>>>>>>> filter f_default { level(info..emerg) and
>>>>>>>>> not (facility(mail)
>>>>>>>>> or facility(authpriv)
>>>>>>>>> or facility(cron)); };
>>>>>>>>> filter f_auth { facility(authpriv); };
>>>>>>>>> filter f_mail { facility(mail); };
>>>>>>>>> filter f_emergency { level(emerg); };
>>>>>>>>> filter f_news { facility(uucp) or
>>>>>>>>> (facility(news)
>>>>>>>>> and level(crit..emerg)); };
>>>>>>>>> filter f_boot { facility(local7); };
>>>>>>>>> filter f_cron { facility(cron); };
>>>>>>>>>
>>>>>>>>> #log { source(s_sys); filter(f_kernel); destination(d_cons); };
>>>>>>>>> log { source(s_sys); filter(f_kernel); destination(d_kern); };
>>>>>>>>> log { source(s_sys); filter(f_default); destination(d_mesg); };
>>>>>>>>> log { source(s_sys); filter(f_auth); destination(d_auth); };
>>>>>>>>> log { source(s_sys); filter(f_mail); destination(d_mail); };
>>>>>>>>> log { source(s_sys); filter(f_emergency); destination(d_mlal); };
>>>>>>>>> log { source(s_sys); filter(f_news); destination(d_spol); };
>>>>>>>>> log { source(s_sys); filter(f_boot); destination(d_boot); };
>>>>>>>>> log { source(s_sys); filter(f_cron); destination(d_cron); };
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> log { source(s_net); destination(d_graylog); };
>>>>>>>>> log { source(s_sys); filter(f_default); destination(d_graylog);};
>>>>>>>>>
>>>>>>>>> # Source additional configuration files (.conf extension only)
>>>>>>>>> @include "/etc/syslog-ng/conf.d/*.conf"
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> # vim:ft=syslog-ng:ai:si:ts=4:sw=4:et:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ______________________________________________________________________________
>>>>>>>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>>>>>>>> Documentation:
>>>>>>>>> http://www.balabit.com/support/documentation/?product=syslog-ng
>>>>>>>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>>>>>>>
>>>>>>>>>
>>>>>>>> ______________________________________________________________________________
>>>>>>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>>>>>>> Documentation:
>>>>>>>> http://www.balabit.com/support/documentation/?product=syslog-ng
>>>>>>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> ______________________________________________________________________________
>>>>>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>>>>>> Documentation:
>>>>>>> http://www.balabit.com/support/documentation/?product=syslog-ng
>>>>>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> ______________________________________________________________________________
>>>>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>>>>> Documentation:
>>>>>> http://www.balabit.com/support/documentation/?product=syslog-ng
>>>>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>>>>
>>>>>>
>>>>>
>>>>> ______________________________________________________________________________
>>>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>>>> Documentation:
>>>>> http://www.balabit.com/support/documentation/?product=syslog-ng
>>>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>>>
>>>>>
>>>>>
>>>>
>>>> ______________________________________________________________________________
>>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>>> Documentation:
>>>> http://www.balabit.com/support/documentation/?product=syslog-ng
>>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>>
>>>>
>>>
>>> ______________________________________________________________________________
>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>> Documentation:
>>> http://www.balabit.com/support/documentation/?product=syslog-ng
>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>
>>>
>>>
>>
>> ______________________________________________________________________________
>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>> Documentation:
>> http://www.balabit.com/support/documentation/?product=syslog-ng
>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>
>>
> ______________________________________________________________________________
> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
> Documentation:
> http://www.balabit.com/support/documentation/?product=syslog-ng
> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.balabit.hu/pipermail/syslog-ng/attachments/20181011/5e1b9489/attachment-0001.html>
More information about the syslog-ng
mailing list