I am trying to build a 3.4.1 RPM for CentOS 6. I already built the eventlog RPM and upgraded the one provided by EPEL repo. If I compile straight after untarring the source by running "./configure" (with options same as listed in the SPEC file below) and "make check", the tests runs ok and I get the syslog-ng binaries. But if I build a RPM from the SPEC file below, build fails with the following error. ------- error --------------- Input is not valid utf8, glob match requires utf8 input, thus it never matches in this case; value='\xe1rv\xedzt\xfbr\xf5t\xfck\xf6rf\xfar\xf3g\xe9p' PASS: test_matcher PASS: test_clone_logmsg PASS: test_serialize PASS: test_msgparse PASS: test_template /bin/sh: line 5: 31254 Segmentation fault (core dumped) ${dir}$tst FAIL: test_template_speed One "invalid regular expression" message is to be expected Error compiling regular expression; re='((', error='Unmatched ( or \(' One "invalid regular expressions" message is to be expected Error compiling regular expression; re='((', error='Unmatched ( or \(' WARNING: Your configuration file uses an obsoleted regexp option, please update your configuration; option='(?i)', change='use ignore-case flag instead of (?i)' One "invalid regular expression" message is to be expected Error compiling regular expression; re='((', error='Unmatched ( or \(' One "invalid regular expression" message is to be expected Error while compiling regular expression; regular_expression='((', error_at='', error_offset='2', error_message='missing )', error_code='14' One "invalid regular expressions" message is to be expected Error while compiling regular expression; regular_expression='((', error_at='', error_offset='2', error_message='missing )', error_code='14' One "invalid regular expressions" message is to be expected Invalid regexp flags; re='(?iana' One "invalid regular expressions" message is to be expected Error while compiling regular expression; regular_expression='(?iana', error_at='ana', error_offset='3', error_message='unrecognized character after (? or (?-', error_code='12' One "invalid regular expression" message is to be expected Error while compiling regular expression; regular_expression='((', error_at='', error_offset='2', error_message='missing )', error_code='14' PASS: test_filters DNS cache speed: 6578947.368 iters/sec inet_ntop speed: 1589572.405 iters/sec PASS: test_dnscache PASS: test_findeom PASS: test_findcrlf PASS: test_tags PASS: test_logwriter PASS: test_logproto PASS: test_serialize Failed to open the time zone file; filename='/usr/share/zoneinfo/Factory', message='Failed to open file \'/usr/share/zoneinfo/Factory\': open() failed: No such file or directory' Bogus timezone spec, must be in the format [+-]HH:MM, offset must be less than 24:00; value='Factory' SKIP: Factory PASS: test_zone PASS: test_persist_state PASS: test_value_pairs ==================== 1 of 21 tests failed ==================== make[3]: *** [check-TESTS] Error 1 make[3]: Leaving directory `/home/makerpm/rpmbuild/BUILD/syslog-ng-3.4.1/tests/unit' make[2]: *** [check-am] Error 2 make[2]: Leaving directory `/home/makerpm/rpmbuild/BUILD/syslog-ng-3.4.1/tests/unit' make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory `/home/makerpm/rpmbuild/BUILD/syslog-ng-3.4.1/tests' make: *** [check-recursive] Error 1 error: Bad exit status from /var/tmp/rpm-tmp.izm78V (%check) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.izm78V (%check) ----------------------------xxxxxxxxxxxxx------------------------------------------------------------------------- ---------------syslog-ng.SPEC------------------------------------ %global evtlog_ver 0.2.12 %global _sbindir /sbin %global _libdir /%{_lib} Name: syslog-ng Version: 3.4.1 Release: 1%{?dist} Summary: Next-generation syslog server Group: System Environment/Daemons License: GPLv2+ Url: http://www.balabit.com/network-security/syslog-ng Source0: http://www.balabit.com/downloads/files?path=/syslog-ng/sources/%{version}/source/%{name}_%{version}.tar.gz Source1: syslog-ng.conf Source2: syslog-ng.init.d Source3: syslog-ng.sysconfig Source4: syslog-ng.logrotate #Patch0: syslog-ng-3.2.4-disable-ssl-tests.patch #Patch1: syslog-ng-3.2.5-tests-functional-control.py.patch #Patch2: syslog-ng-3.2.5-tests-functional-sql-test.patch BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) BuildRequires: pkgconfig BuildRequires: libtool BuildRequires: eventlog-devel >= %{evtlog_ver} BuildRequires: glib2-devel >= 2.10.1 BuildRequires: libdbi-devel BuildRequires: libnet-devel >= 1.1.4-3 BuildRequires: openssl-devel BuildRequires: pcre-devel >= 6.1 BuildRequires: tcp_wrappers-devel # For the test suite BuildRequires: python # For the SQL tests BuildRequires: libdbi-dbd-sqlite Requires: logrotate Requires(post): /sbin/chkconfig Requires(preun): /sbin/chkconfig Requires(preun): /sbin/service Requires(postun): /sbin/service Provides: syslog # merge separate syslog-vim package into one Provides: syslog-ng-vim = %{version}-%{release} Obsoletes: syslog-ng-vim < 2.0.8-1 %description syslog-ng, as the name shows, is a syslogd replacement, but with new functionality for the new generation. The original syslogd allows messages only to be sorted based on priority/facility pairs; syslog-ng adds the possibility to filter based on message contents using regular expressions. The new configuration scheme is intuitive and powerful. Forwarding logs over TCP and remembering all forwarding hops makes it ideal for firewalled environments. %package libdbi Summary: libdbi support for %{name} Group: Development/Libraries Requires: %{name} = %{version}-%{release} %description libdbi This module supports a large number of database systems via libdbi. %package devel Summary: Development files for %{name} Group: Development/Libraries Requires: %{name} = %{version}-%{release} %description devel The %{name}-devel package contains libraries and header files for developing applications that use %{name}. %prep %setup -q #%patch0 -p1 #%patch1 -p1 #%patch2 -p1 # fix perl path %{__sed} -i 's|^#!/usr/local/bin/perl|#!%{__perl}|' contrib/relogger.pl # fix executable perms on contrib files %{__chmod} -c a-x contrib/syslog2ng # fix authors file /usr/bin/iconv -f iso8859-1 -t utf-8 AUTHORS > AUTHORS.conv && \ %{__mv} -f AUTHORS.conv AUTHORS %build %configure \ --prefix=/ \ --libdir=/%{_lib} \ --includedir=%{_includedir} \ --sysconfdir=%{_sysconfdir}/%{name} \ --localstatedir=%{_sharedstatedir}/%{name} \ --datadir=%{_datadir}/%{name} \ --with-module-dir=/%{_lib}/%{name} \ --enable-ipv6 \ --enable-tcp-wrapper \ --enable-pcre \ --enable-ssl \ --enable-shared \ --disable-static \ --enable-dynamic-linking \ --enable-threads=posix \ --enable-linux-caps # remove rpath sed -i 's|^hardcode_libdir_flag_spec=.*|hardcode_libdir_flag_spec=""|g' libtool sed -i 's|^runpath_var=LD_RUN_PATH|runpath_var=DIE_RPATH_DIE|g' libtool make %{_smp_mflags} %install %{__rm} -rf %{buildroot} make DESTDIR=%{buildroot} install #%{__install} -d -m 755 %{buildroot}%{_sysconfdir}/%{name} %{__install} -p -m 644 %{SOURCE1} %{buildroot}%{_sysconfdir}/%{name}/syslog-ng.conf %{__install} -d -m 755 %{buildroot}%{_sysconfdir}/init.d %{__install} -p -m 755 %{SOURCE2} %{buildroot}%{_sysconfdir}/init.d/%{name} %{__install} -d -m 755 %{buildroot}%{_sysconfdir}/sysconfig %{__install} -p -m 644 %{SOURCE3} %{buildroot}%{_sysconfdir}/sysconfig/%{name} %{__install} -d -m 755 %{buildroot}%{_sysconfdir}/logrotate.d %{__install} -p -m 644 %{SOURCE4} %{buildroot}%{_sysconfdir}/logrotate.d/syslog # create the local state dir %{__install} -d -m 755 %{buildroot}/%{_sharedstatedir}/%{name} # install the main library header files %{__install} -d -m 755 %{buildroot}%{_includedir}/%{name} %{__install} -p -m 644 config.h %{buildroot}%{_includedir}/%{name} %{__install} -p -m 644 lib/*.h %{buildroot}%{_includedir}/%{name} # install vim files %{__install} -d -m 755 %{buildroot}%{_datadir}/%{name} %{__install} -p -m 644 contrib/syslog-ng.vim %{buildroot}%{_datadir}/%{name} for vimver in 70 71 72 73 ; do %{__install} -d -m 755 %{buildroot}%{_datadir}/vim/vim$vimver/syntax cd %{buildroot}%{_datadir}/vim/vim$vimver/syntax ln -s ../../../%{name}/syslog-ng.vim . cd - done find %{buildroot} -name "*.la" -exec rm -f {} \; %check LD_LIBRARY_PATH=%{buildroot}/%{_lib}:%{buildroot}/%{_lib}/%{name} make check %clean rm -rf %{buildroot} %post /sbin/ldconfig /sbin/chkconfig --add %{name} %preun if [ $1 -eq 0 ] ; then # Package removal, not upgrade /sbin/service %{name} stop > /dev/null 2>&1 /sbin/chkconfig --del %{name} fi %postun /sbin/ldconfig if [ $1 -ge 1 ] ; then # Package upgrade, not uninstall /sbin/service %{name} condrestart >/dev/null 2>&1 fi %triggerin -- vim-common VIMVERNEW=`rpm -q --qf='%%{epoch}:%%{version}\n' vim-common | sort | tail -n 1 | sed -e 's/[0-9]*://' | sed -e 's/\.[0-9]*$//' | sed -e 's/\.//'` [ -d %{_datadir}/vim/vim${VIMVERNEW}/syntax ] && \ cd %{_datadir}/vim/vim${VIMVERNEW}/syntax && \ ln -sf ../../../%{name}/syslog-ng.vim . || : %triggerun -- vim-common VIMVEROLD=`rpm -q --qf='%%{epoch}:%%{version}\n' vim-common | sort | head -n 1 | sed -e 's/[0-9]*://' | sed -e 's/\.[0-9]*$//' | sed -e 's/\.//'` [ $2 = 0 ] && rm -f %{_datadir}/vim/vim${VIMVEROLD}/syntax/syslog-ng.vim || : %triggerpostun -- vim-common VIMVEROLD=`rpm -q --qf='%%{epoch}:%%{version}\n' vim-common | sort | head -n 1 | sed -e 's/[0-9]*://' | sed -e 's/\.[0-9]*$//' | sed -e 's/\.//'` VIMVERNEW=`rpm -q --qf='%%{epoch}:%%{version}\n' vim-common | sort | tail -n 1 | sed -e 's/[0-9]*://' | sed -e 's/\.[0-9]*$//' | sed -e 's/\.//'` if [ $1 = 1 ]; then rm -f %{_datadir}/vim/vim${VIMVEROLD}/syntax/syslog-ng.vim || : [ -d %{_datadir}/vim/vim${VIMVERNEW}/syntax ] && \ cd %{_datadir}/vim/vim${VIMVERNEW}/syntax && \ ln -sf ../../../%{name}/syslog-ng.vim . || : fi %files %defattr(-,root,root,-) %doc AUTHORS COPYING README ChangeLog NEWS %doc doc/security/*.txt %doc contrib/{relogger.pl,syslog2ng,syslog-ng.conf.doc} %dir %{_sysconfdir}/%{name} %dir %{_sysconfdir}/%{name}/patterndb.d %config(noreplace) %{_sysconfdir}/%{name}/%{name}.conf %config(noreplace) %{_sysconfdir}/%{name}/modules.conf %config(noreplace) %{_sysconfdir}/%{name}/scl.conf %config(noreplace) %{_sysconfdir}/sysconfig/%{name} %config(noreplace) %{_sysconfdir}/logrotate.d/syslog %{_sysconfdir}/init.d/%{name} %dir %{_sharedstatedir}/%{name} %{_sbindir}/%{name} %{_sbindir}/syslog-ng-ctl %{_bindir}/loggen %{_bindir}/pdbtool %{_bindir}/update-patterndb %{_libdir}/lib%{name}.so.* %{_libdir}/%{name}/*.so %exclude %{_libdir}/%{name}/libafsql.so %dir %{_datadir}/%{name} %{_datadir}/%{name}/syslog-ng.vim %ghost %{_datadir}/vim/ # scl files %{_datadir}/%{name}/include/ # uhm, some better places for those? %{_datadir}/%{name}/xsd/ %{_mandir}/man1/loggen.1* %{_mandir}/man1/pdbtool.1* %{_mandir}/man1/syslog-ng-ctl.1* %{_mandir}/man5/syslog-ng.conf.5* %{_mandir}/man8/syslog-ng.8* %files libdbi %defattr(-,root,root,-) %{_libdir}/%{name}/libafsql.so %files devel %defattr(-,root,root,-) %{_libdir}/libsyslog-ng.so %{_includedir}/%{name}/ %changelog ------------------------------------------------------------------------------------------------------------------------ ----------/var/tmp/rpm-tmp.izm78V-------------------- #!/bin/sh RPM_SOURCE_DIR="/home/makerpm/rpmbuild/SOURCES" RPM_BUILD_DIR="/home/makerpm/rpmbuild/BUILD" RPM_OPT_FLAGS="-O2 -g" RPM_ARCH="x86_64" RPM_OS="linux" export RPM_SOURCE_DIR RPM_BUILD_DIR RPM_OPT_FLAGS RPM_ARCH RPM_OS RPM_DOC_DIR="/usr/share/doc" export RPM_DOC_DIR RPM_PACKAGE_NAME="syslog-ng" RPM_PACKAGE_VERSION="3.4.1" RPM_PACKAGE_RELEASE="1.el6" export RPM_PACKAGE_NAME RPM_PACKAGE_VERSION RPM_PACKAGE_RELEASE LANG=C export LANG unset CDPATH DISPLAY ||: RPM_BUILD_ROOT="/home/makerpm/rpmbuild/BUILDROOT/syslog-ng-3.4.1-1.el6.x86_64" export RPM_BUILD_ROOT PKG_CONFIG_PATH="/lib64/pkgconfig:/usr/share/pkgconfig" export PKG_CONFIG_PATH set -x umask 022 cd "/home/makerpm/rpmbuild/BUILD" cd 'syslog-ng-3.4.1' LD_LIBRARY_PATH=/home/makerpm/rpmbuild/BUILDROOT/syslog-ng-3.4.1-3.el6.x86_64/lib64:/makerpm/rpmbuild/BUILDROOT/syslog-ng-3.4.1-3.el6.x86_64/lib64/syslog-ng make check exit 0 -------------------------------------------------------------------------------------