Hello, There is a syslog-ng-ctl reload which, probably you are looking for that. -- Kokan On Tue, Oct 30, 2018 at 1:00 PM Monitto Pitchaimani sebastin (mopitcha) < mopitcha@cisco.com> wrote:

Hi All,

Is there a way to update the syslog-ng config without restarting the syslog-ng?

Regards,

Monitto

______________________________________________________________________________ Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng Documentation: http://www.balabit.com/support/documentation/?product=syslog-ng FAQ: http://www.balabit.com/wiki/syslog-ng-faq

Here is my config @version:3.5 @include "scl.conf" # syslog-ng configuration file. # # This should behave pretty much like the original syslog on RedHat. But # it could be configured a lot smarter. # # See syslog-ng(8) and syslog-ng.conf(5) for more information. # # Note: it also sources additional configuration files (*.conf) # located in /etc/syslog-ng/conf.d/ options { flush_lines (0); time_reopen (10); log_fifo_size (250000); chain_hostnames (off); use_dns (no); use_fqdn (no); create_dirs (no); keep_hostname (yes); }; source s_sys { system(); internal(); # udp(ip(0.0.0.0) port(514)); }; source s_net { udp(ip(0.0.0.0) port(514)); #tcp(ip(0.0.0.0) port(514) max-connections(256)); }; destination d_cons { file("/dev/console"); }; destination d_mesg { file("/var/log/messages"); }; destination d_auth { file("/var/log/secure"); }; destination d_mail { file("/var/log/maillog" flush_lines(10)); }; destination d_spol { file("/var/log/spooler"); }; destination d_boot { file("/var/log/boot.log"); }; destination d_cron { file("/var/log/cron"); }; destination d_kern { file("/var/log/kern"); }; destination d_mlal { usertty("*"); }; destination d_graylog { tcp("graylog.host" port (12201) ); }; filter f_kernel { facility(kern); }; filter f_default { level(info..emerg) and not (facility(mail) or facility(authpriv) or facility(cron)); }; filter f_auth { facility(authpriv); }; filter f_mail { facility(mail); }; filter f_emergency { level(emerg); }; filter f_news { facility(uucp) or (facility(news) and level(crit..emerg)); }; filter f_boot { facility(local7); }; filter f_cron { facility(cron); }; log { source(s_sys); filter(f_kernel); destination(d_cons); }; log { source(s_sys); filter(f_kernel); destination(d_kern); }; log { source(s_sys); filter(f_default); destination(d_mesg); }; log { source(s_sys); filter(f_auth); destination(d_auth); }; log { source(s_sys); filter(f_mail); destination(d_mail); }; log { source(s_sys); filter(f_emergency); destination(d_mlal); }; log { source(s_sys); filter(f_news); destination(d_spol); }; log { source(s_sys); filter(f_boot); destination(d_boot); }; log { source(s_sys); filter(f_cron); destination(d_cron); }; log { source(s_net); destination(d_graylog); }; log { source(s_sys); filter(f_default); destination(d_graylog);}; # Source additional configuration files (.conf extension only) @include "/etc/syslog-ng/conf.d/*.conf" On Tue, Oct 30, 2018 at 8:00 AM Monitto Pitchaimani sebastin (mopitcha) < mopitcha@cisco.com> wrote:

Hi All,

Is there a way to update the syslog-ng config without restarting the syslog-ng?

Regards,

Monitto

______________________________________________________________________________ Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng Documentation: http://www.balabit.com/support/documentation/?product=syslog-ng FAQ: http://www.balabit.com/wiki/syslog-ng-faq