Syslog-ng will not configure properly on vanilla Red Hat
syslog-ng needs the libol library, which I compiled and installed to it's default location, /usr/local/lib. When configuring syslog-ng I get this error: <snip> checking for strptime... yes checking for TCP wrapper library... -lwrap checking whether to enable Sun STREAMS support... no checking whether to enable Sun door support... no checking whether to enable TCP wrapper support... no checking whether to enable spoof_source support... no checking libol version >= 0.3.13... no configure: error: Required libol version not found Here is the library: syslog:/usr/local/lib #ls -la total 124 drwxr-xr-x 2 root root 4096 May 13 06:45 . drwxr-xr-x 23 root root 4096 Jan 10 10:55 .. -rw-r--r-- 1 root root 51408 May 13 06:45 libol.a -rwxr-xr-x 1 root root 698 May 13 06:45 libol.la lrwxrwxrwx 1 root root 14 May 13 06:45 libol.so -> libol.so.0.0.0 lrwxrwxrwx 1 root root 14 May 13 06:45 libol.so.0 -> libol.so.0.0.0 -rwxr-xr-x 1 root root 50799 May 13 06:45 libol.so.0.0.0 I added /usr/local/lib to /etc/ld.so.conf and ran ldconfig. (even rebooted as well) This did not work. I added /usr/local/lib to LD_LIBRARY_PATH, this did not work. I tried configuring with --with-libol=/usr/local and got same error. I tried configuring with --with-libol=/usr/local/lib and got same error. I tried configuring with --with-libol=/usr/local, however, this time I get this error: checking for TCP wrapper library... -lwrap checking whether to enable Sun STREAMS support... no checking whether to enable Sun door support... no checking whether to enable TCP wrapper support... no checking whether to enable spoof_source support... no checking libol version >= 0.3.13... configure: error: libol-config not found in the specified location libol-config is in /usr/local/bin: syslog:/usr/local/src/Syslog-Ng/syslog-ng-1.6.3 #ls -l /usr/local/bin/ -rwxr-xr-x 1 root root 1298 May 13 06:45 libol-config I have followed every doc as instructed. This is a vanilla RH 9 system with all updates. Thx for any help. cc
Hi Keg, run /sbin/ldconfig after adding /usr/local/lib into your /etc/ld.so.conf. then, run configure again without --with-libol option. how'bout it? HTH mitch On Thu, 13 May 2004 07:28:56 -0700 Subject: [syslog-ng]Syslog-ng will not configure properly on vanilla Red Hat Keg <syslog-ng@zulu420.com> wrote:
syslog-ng needs the libol library, which I compiled and installed to it's default location, /usr/local/lib.
When configuring syslog-ng I get this error: <snip> checking for strptime... yes checking for TCP wrapper library... -lwrap checking whether to enable Sun STREAMS support... no checking whether to enable Sun door support... no checking whether to enable TCP wrapper support... no checking whether to enable spoof_source support... no checking libol version >= 0.3.13... no configure: error: Required libol version not found
Here is the library: syslog:/usr/local/lib #ls -la total 124 drwxr-xr-x 2 root root 4096 May 13 06:45 . drwxr-xr-x 23 root root 4096 Jan 10 10:55 .. -rw-r--r-- 1 root root 51408 May 13 06:45 libol.a -rwxr-xr-x 1 root root 698 May 13 06:45 libol.la lrwxrwxrwx 1 root root 14 May 13 06:45 libol.so -> libol.so.0.0.0 lrwxrwxrwx 1 root root 14 May 13 06:45 libol.so.0 -> libol.so.0.0.0 -rwxr-xr-x 1 root root 50799 May 13 06:45 libol.so.0.0.0
I added /usr/local/lib to /etc/ld.so.conf and ran ldconfig. (even rebooted as well) This did not work. I added /usr/local/lib to LD_LIBRARY_PATH, this did not work. I tried configuring with --with-libol=/usr/local and got same error. I tried configuring with --with-libol=/usr/local/lib and got same error. I tried configuring with --with-libol=/usr/local, however, this time I get this error:
checking for TCP wrapper library... -lwrap checking whether to enable Sun STREAMS support... no checking whether to enable Sun door support... no checking whether to enable TCP wrapper support... no checking whether to enable spoof_source support... no checking libol version >= 0.3.13... configure: error: libol-config not found in the specified location
libol-config is in /usr/local/bin: syslog:/usr/local/src/Syslog-Ng/syslog-ng-1.6.3 #ls -l /usr/local/bin/ -rwxr-xr-x 1 root root 1298 May 13 06:45 libol-config
I have followed every doc as instructed. This is a vanilla RH 9 system with all updates.
Thx for any help. cc
_______________________________________________ syslog-ng maillist - syslog-ng@lists.balabit.hu https://lists.balabit.hu/mailman/listinfo/syslog-ng Frequently asked questions at http://www.campin.net/syslog-ng/faq.html
-- Musashino-shi, Tokyo, Japan K12LTSP in Japanese ; http://open-mitch.dyndns.org/k12ltsp/
Yea, tried that. I tried just about every permutation of configure options, LD_LIBRARY_PATH settings, etc... ???? -Chuck michihito matsubara wrote:
Hi Keg,
run /sbin/ldconfig after adding /usr/local/lib into your /etc/ld.so.conf.
then, run configure again without --with-libol option.
how'bout it?
HTH mitch
On Thu, 13 May 2004 07:28:56 -0700 Subject: [syslog-ng]Syslog-ng will not configure properly on vanilla Red Hat Keg <syslog-ng@zulu420.com> wrote:
syslog-ng needs the libol library, which I compiled and installed to it's default location, /usr/local/lib.
When configuring syslog-ng I get this error: <snip> checking for strptime... yes checking for TCP wrapper library... -lwrap checking whether to enable Sun STREAMS support... no checking whether to enable Sun door support... no checking whether to enable TCP wrapper support... no checking whether to enable spoof_source support... no checking libol version >= 0.3.13... no configure: error: Required libol version not found
Here is the library: syslog:/usr/local/lib #ls -la total 124 drwxr-xr-x 2 root root 4096 May 13 06:45 . drwxr-xr-x 23 root root 4096 Jan 10 10:55 .. -rw-r--r-- 1 root root 51408 May 13 06:45 libol.a -rwxr-xr-x 1 root root 698 May 13 06:45 libol.la lrwxrwxrwx 1 root root 14 May 13 06:45 libol.so -> libol.so.0.0.0 lrwxrwxrwx 1 root root 14 May 13 06:45 libol.so.0 -> libol.so.0.0.0 -rwxr-xr-x 1 root root 50799 May 13 06:45 libol.so.0.0.0
I added /usr/local/lib to /etc/ld.so.conf and ran ldconfig. (even rebooted as well) This did not work. I added /usr/local/lib to LD_LIBRARY_PATH, this did not work. I tried configuring with --with-libol=/usr/local and got same error. I tried configuring with --with-libol=/usr/local/lib and got same error. I tried configuring with --with-libol=/usr/local, however, this time I get this error:
checking for TCP wrapper library... -lwrap checking whether to enable Sun STREAMS support... no checking whether to enable Sun door support... no checking whether to enable TCP wrapper support... no checking whether to enable spoof_source support... no checking libol version >= 0.3.13... configure: error: libol-config not found in the specified location
libol-config is in /usr/local/bin: syslog:/usr/local/src/Syslog-Ng/syslog-ng-1.6.3 #ls -l /usr/local/bin/ -rwxr-xr-x 1 root root 1298 May 13 06:45 libol-config
I have followed every doc as instructed. This is a vanilla RH 9 system with all updates.
Thx for any help. cc
_______________________________________________ syslog-ng maillist - syslog-ng@lists.balabit.hu https://lists.balabit.hu/mailman/listinfo/syslog-ng Frequently asked questions at http://www.campin.net/syslog-ng/faq.html
I just realized it is looking for libol > 0.3.13, but the latest on the site is 0.3.9 which it says to use with syslog-ng 1.6.3. Where can I get this newer version of libol???? ?? michihito matsubara wrote:
Hi Keg,
run /sbin/ldconfig after adding /usr/local/lib into your /etc/ld.so.conf.
then, run configure again without --with-libol option.
how'bout it?
HTH mitch
On Thu, 13 May 2004 07:28:56 -0700 Subject: [syslog-ng]Syslog-ng will not configure properly on vanilla Red Hat Keg <syslog-ng@zulu420.com> wrote:
syslog-ng needs the libol library, which I compiled and installed to it's default location, /usr/local/lib.
When configuring syslog-ng I get this error: <snip> checking for strptime... yes checking for TCP wrapper library... -lwrap checking whether to enable Sun STREAMS support... no checking whether to enable Sun door support... no checking whether to enable TCP wrapper support... no checking whether to enable spoof_source support... no checking libol version >= 0.3.13... no configure: error: Required libol version not found
Here is the library: syslog:/usr/local/lib #ls -la total 124 drwxr-xr-x 2 root root 4096 May 13 06:45 . drwxr-xr-x 23 root root 4096 Jan 10 10:55 .. -rw-r--r-- 1 root root 51408 May 13 06:45 libol.a -rwxr-xr-x 1 root root 698 May 13 06:45 libol.la lrwxrwxrwx 1 root root 14 May 13 06:45 libol.so -> libol.so.0.0.0 lrwxrwxrwx 1 root root 14 May 13 06:45 libol.so.0 -> libol.so.0.0.0 -rwxr-xr-x 1 root root 50799 May 13 06:45 libol.so.0.0.0
I added /usr/local/lib to /etc/ld.so.conf and ran ldconfig. (even rebooted as well) This did not work. I added /usr/local/lib to LD_LIBRARY_PATH, this did not work. I tried configuring with --with-libol=/usr/local and got same error. I tried configuring with --with-libol=/usr/local/lib and got same error. I tried configuring with --with-libol=/usr/local, however, this time I get this error:
checking for TCP wrapper library... -lwrap checking whether to enable Sun STREAMS support... no checking whether to enable Sun door support... no checking whether to enable TCP wrapper support... no checking whether to enable spoof_source support... no checking libol version >= 0.3.13... configure: error: libol-config not found in the specified location
libol-config is in /usr/local/bin: syslog:/usr/local/src/Syslog-Ng/syslog-ng-1.6.3 #ls -l /usr/local/bin/ -rwxr-xr-x 1 root root 1298 May 13 06:45 libol-config
I have followed every doc as instructed. This is a vanilla RH 9 system with all updates.
Thx for any help. cc
_______________________________________________ syslog-ng maillist - syslog-ng@lists.balabit.hu https://lists.balabit.hu/mailman/listinfo/syslog-ng Frequently asked questions at http://www.campin.net/syslog-ng/faq.html
Keg, a couple of months i've been using snapshot, though. enveryday fetch and build package with my own spec files. running on several Linux and/or BSD box, such as RH7.0, 7.3, 8.0, 9, fedora, FreeBSD RELENGE4, and scratch Linux built by me, and so on. today, running libol-0.3.13+20040513, syslog-ng-1.7.0+20040513. look very stable for me. if you have insterest them, you can get it from below. http://www.balabit.com/downloads/syslog-ng/1.6/src-snapshot/ BUT, again, they are SNAPSHOT. stable for me but maybe not for you, i dont know sorry. regards, mitch On Thu, 13 May 2004 08:28:35 -0700 Subject: Re: [syslog-ng]Syslog-ng will not configure properly on vanilla Red Hat Keg <syslog-ng@zulu420.com> wrote:
I just realized it is looking for libol > 0.3.13, but the latest on the site is 0.3.9 which it says to use with syslog-ng 1.6.3.
Where can I get this newer version of libol???? ??
michihito matsubara wrote:
Hi Keg,
run /sbin/ldconfig after adding /usr/local/lib into your /etc/ld.so.conf.
then, run configure again without --with-libol option.
how'bout it?
HTH mitch
On Thu, 13 May 2004 07:28:56 -0700 Subject: [syslog-ng]Syslog-ng will not configure properly on vanilla Red Hat Keg <syslog-ng@zulu420.com> wrote:
syslog-ng needs the libol library, which I compiled and installed to it's default location, /usr/local/lib.
When configuring syslog-ng I get this error: <snip> checking for strptime... yes checking for TCP wrapper library... -lwrap checking whether to enable Sun STREAMS support... no checking whether to enable Sun door support... no checking whether to enable TCP wrapper support... no checking whether to enable spoof_source support... no checking libol version >= 0.3.13... no configure: error: Required libol version not found
Here is the library: syslog:/usr/local/lib #ls -la total 124 drwxr-xr-x 2 root root 4096 May 13 06:45 . drwxr-xr-x 23 root root 4096 Jan 10 10:55 .. -rw-r--r-- 1 root root 51408 May 13 06:45 libol.a -rwxr-xr-x 1 root root 698 May 13 06:45 libol.la lrwxrwxrwx 1 root root 14 May 13 06:45 libol.so -> libol.so.0.0.0 lrwxrwxrwx 1 root root 14 May 13 06:45 libol.so.0 -> libol.so.0.0.0 -rwxr-xr-x 1 root root 50799 May 13 06:45 libol.so.0.0.0
I added /usr/local/lib to /etc/ld.so.conf and ran ldconfig. (even rebooted as well) This did not work. I added /usr/local/lib to LD_LIBRARY_PATH, this did not work. I tried configuring with --with-libol=/usr/local and got same error. I tried configuring with --with-libol=/usr/local/lib and got same error. I tried configuring with --with-libol=/usr/local, however, this time I get this error:
checking for TCP wrapper library... -lwrap checking whether to enable Sun STREAMS support... no checking whether to enable Sun door support... no checking whether to enable TCP wrapper support... no checking whether to enable spoof_source support... no checking libol version >= 0.3.13... configure: error: libol-config not found in the specified location
libol-config is in /usr/local/bin: syslog:/usr/local/src/Syslog-Ng/syslog-ng-1.6.3 #ls -l /usr/local/bin/ -rwxr-xr-x 1 root root 1298 May 13 06:45 libol-config
I have followed every doc as instructed. This is a vanilla RH 9 system with all updates.
Thx for any help. cc
_______________________________________________ syslog-ng maillist - syslog-ng@lists.balabit.hu https://lists.balabit.hu/mailman/listinfo/syslog-ng Frequently asked questions at http://www.campin.net/syslog-ng/faq.html
_______________________________________________ syslog-ng maillist - syslog-ng@lists.balabit.hu https://lists.balabit.hu/mailman/listinfo/syslog-ng Frequently asked questions at http://www.campin.net/syslog-ng/faq.html
-- Musashino-shi, Tokyo, Japan K12LTSP in Japanese ; http://open-mitch.dyndns.org/k12ltsp/
2004-05-13, cs keltezéssel 20:33-kor michihito matsubara ezt írta:
today, running libol-0.3.13+20040513, syslog-ng-1.7.0+20040513. look very stable for me.
if you have insterest them, you can get it from below.
http://www.balabit.com/downloads/syslog-ng/1.6/src-snapshot/
Hmm.. I must have made a mistake about the 1.7.x version number. There are no 1.7.x versions published. I'll go and fix my scripts. -- Bazsi PGP info: KeyID 9AF8D0A9 Fingerprint CD27 CFB0 802C 0944 9CFD 804E C82C 8EB1
2004-05-13, cs keltezéssel 17:28-kor Keg ezt írta:
I just realized it is looking for libol > 0.3.13, but the latest on the site is 0.3.9 which it says to use with syslog-ng 1.6.3.
Where can I get this newer version of libol???? ??
where can you see the reference to 0.3.9? the latest version can always be found in http://www.balabit.com/downloads/syslog-ng/libol/0.3/
michihito matsubara wrote:
Hi Keg,
run /sbin/ldconfig after adding /usr/local/lib into your /etc/ld.so.conf.
then, run configure again without --with-libol option.
how'bout it?
HTH mitch
On Thu, 13 May 2004 07:28:56 -0700 Subject: [syslog-ng]Syslog-ng will not configure properly on vanilla Red Hat Keg <syslog-ng@zulu420.com> wrote:
syslog-ng needs the libol library, which I compiled and installed to it's default location, /usr/local/lib.
When configuring syslog-ng I get this error: <snip> checking for strptime... yes checking for TCP wrapper library... -lwrap checking whether to enable Sun STREAMS support... no checking whether to enable Sun door support... no checking whether to enable TCP wrapper support... no checking whether to enable spoof_source support... no checking libol version >= 0.3.13... no configure: error: Required libol version not found
Here is the library: syslog:/usr/local/lib #ls -la total 124 drwxr-xr-x 2 root root 4096 May 13 06:45 . drwxr-xr-x 23 root root 4096 Jan 10 10:55 .. -rw-r--r-- 1 root root 51408 May 13 06:45 libol.a -rwxr-xr-x 1 root root 698 May 13 06:45 libol.la lrwxrwxrwx 1 root root 14 May 13 06:45 libol.so -> libol.so.0.0.0 lrwxrwxrwx 1 root root 14 May 13 06:45 libol.so.0 -> libol.so.0.0.0 -rwxr-xr-x 1 root root 50799 May 13 06:45 libol.so.0.0.0
I added /usr/local/lib to /etc/ld.so.conf and ran ldconfig. (even rebooted as well) This did not work. I added /usr/local/lib to LD_LIBRARY_PATH, this did not work. I tried configuring with --with-libol=/usr/local and got same error. I tried configuring with --with-libol=/usr/local/lib and got same error. I tried configuring with --with-libol=/usr/local, however, this time I get this error:
checking for TCP wrapper library... -lwrap checking whether to enable Sun STREAMS support... no checking whether to enable Sun door support... no checking whether to enable TCP wrapper support... no checking whether to enable spoof_source support... no checking libol version >= 0.3.13... configure: error: libol-config not found in the specified location
libol-config is in /usr/local/bin: syslog:/usr/local/src/Syslog-Ng/syslog-ng-1.6.3 #ls -l /usr/local/bin/ -rwxr-xr-x 1 root root 1298 May 13 06:45 libol-config
I have followed every doc as instructed. This is a vanilla RH 9 system with all updates.
Thx for any help. cc
_______________________________________________ syslog-ng maillist - syslog-ng@lists.balabit.hu https://lists.balabit.hu/mailman/listinfo/syslog-ng Frequently asked questions at http://www.campin.net/syslog-ng/faq.html
_______________________________________________ syslog-ng maillist - syslog-ng@lists.balabit.hu https://lists.balabit.hu/mailman/listinfo/syslog-ng Frequently asked questions at http://www.campin.net/syslog-ng/faq.html
-- Bazsi PGP info: KeyID 9AF8D0A9 Fingerprint CD27 CFB0 802C 0944 9CFD 804E C82C 8EB1
Keg, Try to Compile.install.configure libol 0.2.23.tar.gz There is a compatibility issue here. I faced the same and fixed it by installing this version of libol. Later, Chaitanya -----Original Message----- From: syslog-ng-admin@lists.balabit.hu [mailto:syslog-ng-admin@lists.balabit.hu] On Behalf Of Keg Sent: Thursday, May 13, 2004 7:29 AM To: syslog-ng@lists.balabit.hu Subject: [syslog-ng]Syslog-ng will not configure properly on vanilla Red Hat syslog-ng needs the libol library, which I compiled and installed to it's default location, /usr/local/lib. When configuring syslog-ng I get this error: <snip> checking for strptime... yes checking for TCP wrapper library... -lwrap checking whether to enable Sun STREAMS support... no checking whether to enable Sun door support... no checking whether to enable TCP wrapper support... no checking whether to enable spoof_source support... no checking libol version >= 0.3.13... no configure: error: Required libol version not found Here is the library: syslog:/usr/local/lib #ls -la total 124 drwxr-xr-x 2 root root 4096 May 13 06:45 . drwxr-xr-x 23 root root 4096 Jan 10 10:55 .. -rw-r--r-- 1 root root 51408 May 13 06:45 libol.a -rwxr-xr-x 1 root root 698 May 13 06:45 libol.la lrwxrwxrwx 1 root root 14 May 13 06:45 libol.so -> libol.so.0.0.0 lrwxrwxrwx 1 root root 14 May 13 06:45 libol.so.0 -> libol.so.0.0.0 -rwxr-xr-x 1 root root 50799 May 13 06:45 libol.so.0.0.0 I added /usr/local/lib to /etc/ld.so.conf and ran ldconfig. (even rebooted as well) This did not work. I added /usr/local/lib to LD_LIBRARY_PATH, this did not work. I tried configuring with --with-libol=/usr/local and got same error. I tried configuring with --with-libol=/usr/local/lib and got same error. I tried configuring with --with-libol=/usr/local, however, this time I get this error: checking for TCP wrapper library... -lwrap checking whether to enable Sun STREAMS support... no checking whether to enable Sun door support... no checking whether to enable TCP wrapper support... no checking whether to enable spoof_source support... no checking libol version >= 0.3.13... configure: error: libol-config not found in the specified location libol-config is in /usr/local/bin: syslog:/usr/local/src/Syslog-Ng/syslog-ng-1.6.3 #ls -l /usr/local/bin/ -rwxr-xr-x 1 root root 1298 May 13 06:45 libol-config I have followed every doc as instructed. This is a vanilla RH 9 system with all updates. Thx for any help. cc _______________________________________________ syslog-ng maillist - syslog-ng@lists.balabit.hu https://lists.balabit.hu/mailman/listinfo/syslog-ng Frequently asked questions at http://www.campin.net/syslog-ng/faq.html
participants (4)
-
Balazs Scheidler
-
Chaitanya
-
Keg
-
michihito matsubara