Balazs, Could you add the four attached files to the contrib directory? They will be needed by the new specfile. Regards, jpo -- José Pedro Oliveira * mailto: jpo@di.uminho.pt * http://gsd.di.uminho.pt/~jpo * * gpg fingerprint = F9B6 8D87 859D 1C94 48F0 84C0 9749 9EB5 91BD 851B * # syslog-ng configuration file. # # This should behave pretty much like the original syslog on RedHat. But # it could be configured a lot smarter. # # See syslog-ng(8) and syslog-ng.conf(5) for more information. # # 20000925 gb@sysfive.com # # Updated by Frank Crawford (<Frank.Crawford@ac3.com.au>) - 10 Aug 2002 # - for Red Hat 7.3 # - totally do away with klogd # - add message "kernel:" as is done with klogd. # # Updated by Frank Crawford (<Frank.Crawford@ac3.com.au>) - 22 Aug 2002 # - use the log_prefix option as per Balazs Scheidler's email # # Updated by Jose Pedro Oliveira (<jpo at di.uminho.pt>) - 05 Apr 2003 # - corrected filters 'f_filter2' and 'f_filter6' # these filters were only allowing messages of one specific # priority level; they should be allowing messages from that # priority and upper levels. # # Updated by Jose Pedro Oliveira (<jpo at di.uminho.pt>) - 25 Jan 2005 # - Don't sync the d_mail destination # # Updated by Jose Pedro Oliveira (<jpo at di.uminho.pt>) - 01 Feb 2005 # - /proc/kmsg is a file not a pipe. # (https://lists.balabit.hu/pipermail/syslog-ng/2005-February/006963.html) # options { sync (0); time_reopen (10); log_fifo_size (1000); long_hostnames (off); use_dns (no); use_fqdn (no); create_dirs (no); keep_hostname (yes); }; source s_sys { file ("/proc/kmsg" log_prefix("kernel: ")); unix-stream ("/dev/log"); internal(); # udp(ip(0.0.0.0) port(514)); }; destination d_cons { file("/dev/console"); }; destination d_mesg { file("/var/log/messages"); }; destination d_auth { file("/var/log/secure"); }; destination d_mail { file("/var/log/maillog" sync(10)); }; destination d_spol { file("/var/log/spooler"); }; destination d_boot { file("/var/log/boot.log"); }; destination d_cron { file("/var/log/cron"); }; destination d_mlal { usertty("*"); }; #filter f_filter1 { facility(kern); }; filter f_filter2 { level(info..emerg) and not facility(mail,authpriv,cron); }; filter f_filter3 { facility(authpriv); }; filter f_filter4 { facility(mail); }; filter f_filter5 { level(emerg); }; filter f_filter6 { facility(uucp) or (facility(news) and level(crit..emerg)); }; filter f_filter7 { facility(local7); }; filter f_filter8 { facility(cron); }; #log { source(s_sys); filter(f_filter1); destination(d_cons); }; log { source(s_sys); filter(f_filter2); destination(d_mesg); }; log { source(s_sys); filter(f_filter3); destination(d_auth); }; log { source(s_sys); filter(f_filter4); destination(d_mail); }; log { source(s_sys); filter(f_filter5); destination(d_mlal); }; log { source(s_sys); filter(f_filter6); destination(d_spol); }; log { source(s_sys); filter(f_filter7); destination(d_boot); }; log { source(s_sys); filter(f_filter8); destination(d_cron); }; #!/bin/sh # # syslog-ng This starts and stops syslog-ng # # chkconfig: 2345 12 88 # description: reads and logs messages to the system console, log \ # files, other machines and/or users as specified by \ # its configuration file. # processname: /sbin/syslog-ng # config: /etc/syslog-ng/syslog-ng.conf # config: /etc/sysconfig/syslog-ng # pidfile: /var/run/syslog-ng.pid # ### BEGIN INIT INFO # Provides: $syslog ### END INIT INFO # Source function library. . /etc/rc.d/init.d/functions exec="/sbin/syslog-ng" prog=$(basename $exec) [ -f $exec ] || exit 0 # Source config [ -e /etc/sysconfig/$prog ] && . /etc/sysconfig/$prog lockfile=/var/lock/subsys/$prog umask 077 start() { echo -n $"Starting $prog: " daemon $exec $SYSLOGNG_OPTIONS retval=$? echo [ $retval -eq 0 ] && touch $lockfile return $retval } stop() { echo -n $"Stopping $prog: " killproc $prog retval=$? echo [ $retval -eq 0 ] && rm -f $lockfile return $retval } restart() { stop start } reload() { echo -n $"Reloading syslog-ng.conf file: " killproc $prog -HUP retval=$? echo return $retval } force_reload() { restart } fdr_status() { status $prog } case "$1" in start|stop|restart|reload) $1 ;; force-reload) force_reload ;; status) fdr_status ;; condrestart|try-restart) [ ! -f $lockfile ] || restart ;; *) echo $"Usage: $0 {start|stop|status|restart|try-restart|reload|force-reload}" exit 2 esac /var/log/messages /var/log/secure /var/log/maillog /var/log/spooler /var/log/boot.log /var/log/cron { sharedscripts postrotate /bin/kill -HUP `cat /var/run/syslog-ng.pid 2> /dev/null` 2> /dev/null || true endscript } #--- # Syslog-ng command line options # See syslog-ng(8) for more details #--- SYSLOGNG_OPTIONS=""