Configure option --disable-json doesn't seem to function
Topic says it: syslog-ng-3.5.4.1 ./configure --prefix=/usr --enable-dynamic-linking --disable-ipv6 --enable-spoof-source --disable-json checking python module: json... no configure: error: failed to find required module json configure: error: ./configure.gnu failed for modules/afamqp/rabbitmq-c It appears to still be looking. Thank you. James
On 2014-07-08 11:56, James Lay wrote:
Topic says it:
syslog-ng-3.5.4.1
./configure --prefix=/usr --enable-dynamic-linking --disable-ipv6 --enable-spoof-source --disable-json
checking python module: json... no configure: error: failed to find required module json configure: error: ./configure.gnu failed for modules/afamqp/rabbitmq-c
It appears to still be looking. Thank you.
James
Any takers on this? I've installed json-c and simplejson to no avail...I get the same as above. I'm at a standstill. James
Hi, Hmm.. this is probably the embedded configure script for rabbitmq-c and not syslog-ng's own. try disabling rabbitmq, or pip install the json module to your python installation, because that's what it bitches about. HTH On Tue, Jul 8, 2014 at 11:11 PM, James Lay <jlay@slave-tothe-box.net> wrote:
On 2014-07-08 11:56, James Lay wrote:
Topic says it:
syslog-ng-3.5.4.1
./configure --prefix=/usr --enable-dynamic-linking --disable-ipv6 --enable-spoof-source --disable-json
checking python module: json... no configure: error: failed to find required module json configure: error: ./configure.gnu failed for modules/afamqp/rabbitmq-c
It appears to still be looking. Thank you.
James
Any takers on this? I've installed json-c and simplejson to no avail...I get the same as above. I'm at a standstill.
James
______________________________________________________________________________ Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng Documentation: http://www.balabit.com/support/documentation/?product=syslog-ng FAQ: http://www.balabit.com/wiki/syslog-ng-faq
-- Bazsi
On 2014-07-08 16:48, Balazs Scheidler wrote:
Hi,
Hmm.. this is probably the embedded configure script for rabbitmq-c and not syslog-ngs own. try disabling rabbitmq, or pip install the json module to your python installation, because thats what it bitches about.
HTH
On Tue, Jul 8, 2014 at 11:11 PM, James Lay <jlay@slave-tothe-box.net [4]> wrote:
On 2014-07-08 11:56, James Lay wrote:
Topic says it:
syslog-ng-3.5.4.1
./configure --prefix=/usr --enable-dynamic-linking --disable-ipv6 --enable-spoof-source --disable-json
checking python module: json... no configure: error: failed to find required module json configure: error: ./configure.gnu failed for modules/afamqp/rabbitmq-c
It appears to still be looking. Thank you.
James
Any takers on this? Ive installed json-c and simplejson to no avail...I get the same as above. Im at a standstill.
James
Well....I'm at a loss here. I'm running a version of python that doesn't support pip, so that's out. Configuring with --disable-rabbitmq doesn't seem to make any difference. Both 3.5.* and 3.4.* give me the same results. At this point I'm out of options....any more thoughts would help..thank you. James
try --without-rabbitmq-client or --disable-amqp (which is the protocol that rabbitmq implements) On Wed, Jul 9, 2014 at 5:45 PM, James Lay <jlay@slave-tothe-box.net> wrote:
On 2014-07-08 16:48, Balazs Scheidler wrote:
Hi,
Hmm.. this is probably the embedded configure script for rabbitmq-c and not syslog-ngs own. try disabling rabbitmq, or pip install the json module to your python installation, because thats what it bitches about.
HTH
On Tue, Jul 8, 2014 at 11:11 PM, James Lay <jlay@slave-tothe-box.net [4]> wrote:
On 2014-07-08 11:56, James Lay wrote:
Topic says it:
syslog-ng-3.5.4.1
./configure --prefix=/usr --enable-dynamic-linking --disable-ipv6 --enable-spoof-source --disable-json
checking python module: json... no configure: error: failed to find required module json configure: error: ./configure.gnu failed for modules/afamqp/rabbitmq-c
It appears to still be looking. Thank you.
James
Any takers on this? Ive installed json-c and simplejson to no avail...I get the same as above. Im at a standstill.
James
Well....I'm at a loss here. I'm running a version of python that doesn't support pip, so that's out. Configuring with --disable-rabbitmq doesn't seem to make any difference. Both 3.5.* and 3.4.* give me the same results. At this point I'm out of options....any more thoughts would help..thank you.
James
______________________________________________________________________________ Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng Documentation: http://www.balabit.com/support/documentation/?product=syslog-ng FAQ: http://www.balabit.com/wiki/syslog-ng-faq
-- Bazsi
On 2014-07-09 09:49, Balazs Scheidler wrote:
try --without-rabbitmq-client or --disable-amqp (which is the protocol that rabbitmq implements)
On Wed, Jul 9, 2014 at 5:45 PM, James Lay <jlay@slave-tothe-box.net [5]> wrote:
On 2014-07-08 16:48, Balazs Scheidler wrote:
Hi,
Hmm.. this is probably the embedded configure script for rabbitmq-c and not syslog-ngs own. try disabling rabbitmq, or pip install the json module to your python installation, because thats what it
bitches about.
HTH
On Tue, Jul 8, 2014 at 11:11 PM, James Lay <jlay@slave-tothe-box.net [1]
[4]> wrote:
On 2014-07-08 11:56, James Lay wrote:
Topic says it:
syslog-ng-3.5.4.1
./configure --prefix=/usr --enable-dynamic-linking --disable-ipv6 --enable-spoof-source --disable-json
checking python module: json... no configure: error: failed to find required module json configure: error: ./configure.gnu failed for modules/afamqp/rabbitmq-c
It appears to still be looking. Thank you.
James
Any takers on this? Ive installed json-c and simplejson to no avail...I get the same as above. Im at a standstill.
James
Well....Im at a loss here. Im running a version of python that doesnt support pip, so thats out. Configuring with --disable-rabbitmq doesnt seem to make any difference. Both 3.5.* and 3.4.* give me the same results. At this point Im out of options....any more thoughts would help..thank you.
James
Thanks Balazs, but no change...full configline here: ./configure --prefix=/usr --disable --disable-ipv6 --enable-spoof-source --disable-json --disable-redis --disable --disable-amqp --without-rabbitmq-client Should I file a bug on this? Thanks again. James
On 2014-07-09 09:57, James Lay wrote:
On 2014-07-09 09:49, Balazs Scheidler wrote:
try --without-rabbitmq-client or --disable-amqp (which is the protocol that rabbitmq implements)
On Wed, Jul 9, 2014 at 5:45 PM, James Lay <jlay@slave-tothe-box.net [5]> wrote:
On 2014-07-08 16:48, Balazs Scheidler wrote:
Hi,
Hmm.. this is probably the embedded configure script for rabbitmq-c and not syslog-ngs own. try disabling rabbitmq, or pip install the json module to your python installation, because thats what it
bitches about.
HTH
On Tue, Jul 8, 2014 at 11:11 PM, James Lay <jlay@slave-tothe-box.net [1]
[4]> wrote:
On 2014-07-08 11:56, James Lay wrote:
Topic says it:
syslog-ng-3.5.4.1
./configure --prefix=/usr --enable-dynamic-linking --disable-ipv6 --enable-spoof-source --disable-json
checking python module: json... no configure: error: failed to find required module json configure: error: ./configure.gnu failed for modules/afamqp/rabbitmq-c
It appears to still be looking. Thank you.
James
Any takers on this? Ive installed json-c and simplejson to no avail...I get the same as above. Im at a standstill.
James
Well....Im at a loss here. Im running a version of python that doesnt support pip, so thats out. Configuring with --disable-rabbitmq doesnt seem to make any difference. Both 3.5.* and 3.4.* give me the same results. At this point Im out of options....any more thoughts would help..thank you.
James
Thanks Balazs, but no change...full configline here:
./configure --prefix=/usr --disable --disable-ipv6 --enable-spoof-source --disable-json --disable-redis --disable --disable-amqp --without-rabbitmq-client
Should I file a bug on this? Thanks again.
James
This seems to be something similar: http://comments.gmane.org/gmane.comp.syslog-ng/14959 but no solution seemed to be provided. James
You are right, I misspelled the name. it should be --without-librabbitmq-client I'll check if we can make this easier. Hope it this time. On Wed, Jul 9, 2014 at 6:02 PM, James Lay <jlay@slave-tothe-box.net> wrote:
On 2014-07-09 09:57, James Lay wrote:
On 2014-07-09 09:49, Balazs Scheidler wrote:
try --without-rabbitmq-client or --disable-amqp (which is the protocol that rabbitmq implements)
On Wed, Jul 9, 2014 at 5:45 PM, James Lay <jlay@slave-tothe-box.net [5]> wrote:
On 2014-07-08 16:48, Balazs Scheidler wrote:
Hi,
Hmm.. this is probably the embedded configure script for rabbitmq-c and not syslog-ngs own. try disabling rabbitmq, or pip install the json module to your python installation, because thats what it
bitches about.
HTH
On Tue, Jul 8, 2014 at 11:11 PM, James Lay <jlay@slave-tothe-box.net [1]
[4]> wrote:
On 2014-07-08 11:56, James Lay wrote: > Topic says it: > > syslog-ng-3.5.4.1 > > ./configure --prefix=/usr --enable-dynamic-linking --disable-ipv6 > --enable-spoof-source --disable-json > > checking python module: json... no > configure: error: failed to find required module json > configure: error: ./configure.gnu failed for > modules/afamqp/rabbitmq-c > > It appears to still be looking. Thank you. > > James
Any takers on this? Ive installed json-c and simplejson to no avail...I get the same as above. Im at a standstill.
James
Well....Im at a loss here. Im running a version of python that doesnt support pip, so thats out. Configuring with --disable-rabbitmq doesnt seem to make any difference. Both 3.5.* and 3.4.* give me the same results. At this point Im out of options....any more thoughts would help..thank you.
James
Thanks Balazs, but no change...full configline here:
./configure --prefix=/usr --disable --disable-ipv6 --enable-spoof-source --disable-json --disable-redis --disable --disable-amqp --without-rabbitmq-client
Should I file a bug on this? Thanks again.
James
This seems to be something similar:
http://comments.gmane.org/gmane.comp.syslog-ng/14959
but no solution seemed to be provided.
James
______________________________________________________________________________ Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng Documentation: http://www.balabit.com/support/documentation/?product=syslog-ng FAQ: http://www.balabit.com/wiki/syslog-ng-faq
-- Bazsi
Hi, I have also pushed this patch to github, which should make this easier the next time (or others :) https://github.com/balabit/syslog-ng/pull/158 On Wed, Jul 9, 2014 at 6:52 PM, Balazs Scheidler <bazsi77@gmail.com> wrote:
You are right, I misspelled the name. it should be
--without-librabbitmq-client
I'll check if we can make this easier. Hope it this time.
On Wed, Jul 9, 2014 at 6:02 PM, James Lay <jlay@slave-tothe-box.net> wrote:
On 2014-07-09 09:57, James Lay wrote:
On 2014-07-09 09:49, Balazs Scheidler wrote:
try --without-rabbitmq-client or --disable-amqp (which is the protocol that rabbitmq implements)
On Wed, Jul 9, 2014 at 5:45 PM, James Lay <jlay@slave-tothe-box.net [5]> wrote:
On 2014-07-08 16:48, Balazs Scheidler wrote:
Hi,
Hmm.. this is probably the embedded configure script for rabbitmq-c and not syslog-ngs own. try disabling rabbitmq, or pip install the json module to your python installation, because thats what it
bitches about.
HTH
On Tue, Jul 8, 2014 at 11:11 PM, James Lay <jlay@slave-tothe-box.net [1]
[4]> wrote:
> On 2014-07-08 11:56, James Lay wrote: > > Topic says it: > > > > syslog-ng-3.5.4.1 > > > > ./configure --prefix=/usr --enable-dynamic-linking --disable-ipv6 > > --enable-spoof-source --disable-json > > > > checking python module: json... no > > configure: error: failed to find required module json > > configure: error: ./configure.gnu failed for > > modules/afamqp/rabbitmq-c > > > > It appears to still be looking. Thank you. > > > > James > > Any takers on this? Ive installed json-c and simplejson to no > avail...I get the same as above. Im at a standstill. > > James
Well....Im at a loss here. Im running a version of python that doesnt support pip, so thats out. Configuring with --disable-rabbitmq doesnt seem to make any difference. Both 3.5.* and 3.4.* give me the same results. At this point Im out of options....any more thoughts would help..thank you.
James
Thanks Balazs, but no change...full configline here:
./configure --prefix=/usr --disable --disable-ipv6 --enable-spoof-source --disable-json --disable-redis --disable --disable-amqp --without-rabbitmq-client
Should I file a bug on this? Thanks again.
James
This seems to be something similar:
http://comments.gmane.org/gmane.comp.syslog-ng/14959
but no solution seemed to be provided.
James
______________________________________________________________________________ Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng Documentation: http://www.balabit.com/support/documentation/?product=syslog-ng FAQ: http://www.balabit.com/wiki/syslog-ng-faq
-- Bazsi
-- Bazsi
On 2014-07-09 09:49, Balazs Scheidler wrote:
try --without-rabbitmq-client or --disable-amqp (which is the protocol that rabbitmq implements)
On Wed, Jul 9, 2014 at 5:45 PM, James Lay <jlay@slave-tothe-box.net [5]> wrote:
On 2014-07-08 16:48, Balazs Scheidler wrote:
Hi,
Hmm.. this is probably the embedded configure script for rabbitmq-c and not syslog-ngs own. try disabling rabbitmq, or pip install the json module to your python installation, because thats what it
bitches about.
HTH
On Tue, Jul 8, 2014 at 11:11 PM, James Lay <jlay@slave-tothe-box.net [1]
[4]> wrote:
On 2014-07-08 11:56, James Lay wrote:
Topic says it:
syslog-ng-3.5.4.1
./configure --prefix=/usr --enable-dynamic-linking --disable-ipv6 --enable-spoof-source --disable-json
checking python module: json... no configure: error: failed to find required module json configure: error: ./configure.gnu failed for modules/afamqp/rabbitmq-c
It appears to still be looking. Thank you.
James
Any takers on this? Ive installed json-c and simplejson to no avail...I get the same as above. Im at a standstill.
James
Success....here's the working configline: ./configure --prefix=/usr --enable-dynamic-linking --disable-ipv6 --enable-source-spoof --without-librabbitmq-client Thank you...hope this helps someone else in the event they're in the same boat as me. James
participants (2)
-
Balazs Scheidler
-
James Lay