[syslog-ng] syslog-ng 3.5

[Rodney Bizzell]

I just changed my information on my graylog box 0.0.0.0 isn't what I had in
there.  The way the config is did that look syntax correctly

On Thu, Oct 11, 2018, 12:26 AM Péter, Kókai <peter.kokai at oneidentity.com>
wrote:

> Hello,
>
> If you starg syslogng with -Fe it might give you a clue.
> Also 0.0.0.0 is a no - routable address, so it is fine for source, not so
> much for destination, you should check out on which ip graylog listening,
> if it is 0.0.0.0 you could use the loopback device 120.0.0.1 (or other
> valid ip, but lo would be preferable).
>
> --
> Kokan
>
> On Wed, 10 Oct 2018, 10:57 pm Rodney Bizzell, <hardworker30 at gmail.com>
> wrote:
>
>> I have install syslog-ng 3.5 and I am configuring it to send all logs to
>> Graylog but once changes are made syslog-ng is failing. I change the
>> address of graylog server to 0.0.0.0
>>
>>
>> @version:3.5
>> @include "scl.conf"
>>
>> # syslog-ng configuration file.
>> #
>> # This should behave pretty much like the original syslog on RedHat. But
>> # it could be configured a lot smarter.
>> #
>> # See syslog-ng(8) and syslog-ng.conf(5) for more information.
>> #
>> # Note: it also sources additional configuration files (*.conf)
>> #       located in /etc/syslog-ng/conf.d/
>>
>> options {
>>     flush_lines (0);
>>     time_reopen (10);
>>     log_fifo_size (1000);
>>     chain_hostnames (off);
>>     use_dns (no);
>>     use_fqdn (no);
>>     create_dirs (no);
>>     keep_hostname (yes);
>> };
>>
>> source s_sys {
>>     system();
>>     internal();
>>      udp(ip(0.0.0.0) port(514));
>> };
>>
>> source s_net {
>> udp(ip(0.0.0.0) port(514));
>> tcp(ip(0.0.0.0) port(514) max-connections(256));
>> };
>>
>> destination d_cons { file("/dev/console"); };
>> destination d_mesg { file("/var/log/messages"); };
>> destination d_auth { file("/var/log/secure"); };
>> destination d_mail { file("/var/log/maillog" flush_lines(10)); };
>> destination d_spol { file("/var/log/spooler"); };
>> destination d_boot { file("/var/log/boot.log"); };
>> destination d_cron { file("/var/log/cron"); };
>> destination d_kern { file("/var/log/kern"); };
>> destination d_mlal { usertty("*"); };
>>
>>
>> destination d_graylog {
>> tcp("0.0.0.0"
>> port (12201)
>> spoof_sources(yes)
>> );
>> };
>>
>>
>> filter f_kernel     { facility(kern); };
>> filter f_default    { level(info..emerg) and
>>                         not (facility(mail)
>>                         or facility(authpriv)
>>                         or facility(cron)); };
>> filter f_auth       { facility(authpriv); };
>> filter f_mail       { facility(mail); };
>> filter f_emergency  { level(emerg); };
>> filter f_news       { facility(uucp) or
>>                         (facility(news)
>>                         and level(crit..emerg)); };
>> filter f_boot   { facility(local7); };
>> filter f_cron   { facility(cron); };
>>
>> #log { source(s_sys); filter(f_kernel); destination(d_cons); };
>> log { source(s_sys); filter(f_kernel); destination(d_kern); };
>> log { source(s_sys); filter(f_default); destination(d_mesg); };
>> log { source(s_sys); filter(f_auth); destination(d_auth); };
>> log { source(s_sys); filter(f_mail); destination(d_mail); };
>> log { source(s_sys); filter(f_emergency); destination(d_mlal); };
>> log { source(s_sys); filter(f_news); destination(d_spol); };
>> log { source(s_sys); filter(f_boot); destination(d_boot); };
>> log { source(s_sys); filter(f_cron); destination(d_cron); };
>>
>>
>>
>> log { source(s_net); destination(d_graylog); };
>> log { source(s_sys); filter(f_default); destination(d_graylog);};
>>
>> # Source additional configuration files (.conf extension only)
>> @include "/etc/syslog-ng/conf.d/*.conf"
>>
>>
>> # vim:ft=syslog-ng:ai:si:ts=4:sw=4:et:
>>
>>
>> ______________________________________________________________________________
>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>> Documentation:
>> http://www.balabit.com/support/documentation/?product=syslog-ng
>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>
>>
> ______________________________________________________________________________
> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
> Documentation:
> http://www.balabit.com/support/documentation/?product=syslog-ng
> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.balabit.hu/pipermail/syslog-ng/attachments/20181011/7980a39d/attachment.html>