[syslog-ng] Incremental update of syslog-ng config

[Rodney Bizzell]

Here is my config
@version:3.5
@include "scl.conf"

# syslog-ng configuration file.
#
# This should behave pretty much like the original syslog on RedHat. But
# it could be configured a lot smarter.
#
# See syslog-ng(8) and syslog-ng.conf(5) for more information.
#
# Note: it also sources additional configuration files (*.conf)
#       located in /etc/syslog-ng/conf.d/

options {
    flush_lines (0);
    time_reopen (10);
    log_fifo_size (250000);
    chain_hostnames (off);
    use_dns (no);
    use_fqdn (no);
    create_dirs (no);
    keep_hostname (yes);
};

source s_sys {
    system();
    internal();
    # udp(ip(0.0.0.0) port(514));
};

source s_net {
udp(ip(0.0.0.0) port(514));
#tcp(ip(0.0.0.0) port(514) max-connections(256));
};

destination d_cons { file("/dev/console"); };
destination d_mesg { file("/var/log/messages"); };
destination d_auth { file("/var/log/secure"); };
destination d_mail { file("/var/log/maillog" flush_lines(10)); };
destination d_spol { file("/var/log/spooler"); };
destination d_boot { file("/var/log/boot.log"); };
destination d_cron { file("/var/log/cron"); };
destination d_kern { file("/var/log/kern"); };
destination d_mlal { usertty("*"); };


destination d_graylog {
tcp("graylog.host"
port (12201)
);
};


filter f_kernel     { facility(kern); };
filter f_default    { level(info..emerg) and
                        not (facility(mail)
                        or facility(authpriv)
                        or facility(cron)); };
filter f_auth       { facility(authpriv); };
filter f_mail       { facility(mail); };
filter f_emergency  { level(emerg); };
filter f_news       { facility(uucp) or
                        (facility(news)
                        and level(crit..emerg)); };
filter f_boot   { facility(local7); };
filter f_cron   { facility(cron); };

log { source(s_sys); filter(f_kernel); destination(d_cons); };
log { source(s_sys); filter(f_kernel); destination(d_kern); };
log { source(s_sys); filter(f_default); destination(d_mesg); };
log { source(s_sys); filter(f_auth); destination(d_auth); };
log { source(s_sys); filter(f_mail); destination(d_mail); };
log { source(s_sys); filter(f_emergency); destination(d_mlal); };
log { source(s_sys); filter(f_news); destination(d_spol); };
log { source(s_sys); filter(f_boot); destination(d_boot); };
log { source(s_sys); filter(f_cron); destination(d_cron); };



log { source(s_net); destination(d_graylog); };
log { source(s_sys); filter(f_default); destination(d_graylog);};

# Source additional configuration files (.conf extension only)
@include "/etc/syslog-ng/conf.d/*.conf"


On Tue, Oct 30, 2018 at 8:00 AM Monitto Pitchaimani sebastin (mopitcha) <
mopitcha at cisco.com> wrote:

> Hi All,
>
> Is there a way to update the syslog-ng config without restarting the
> syslog-ng?
>
>
>
> Regards,
>
> Monitto
>
> ______________________________________________________________________________
> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
> Documentation:
> http://www.balabit.com/support/documentation/?product=syslog-ng
> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.balabit.hu/pipermail/syslog-ng/attachments/20181105/ab7209f7/attachment.html>