[syslog-ng] Installing Syslog-NG 3.7 on CentOS 7
Attila Szalai
Attila.Szalai at morganstanley.com
Thu May 12 14:27:29 CEST 2016
I'm a bit confused now.
The syslog-ng -Fevd starts the syslog-ng in the foreground. When you press
Ctrl-C or would like to do anything with that terminal, it stop working. If
you want to run the syslog-ng in the long term, you should start it through
the systemctl command. But make sure, that you start the same syslog-ng in
both time and use the same config too.
Also remember that both syslog-ng cannot run in the same time. So you have
to stop the one you started from the console before start it with the
systemctl.
What error do you get when you start with systemctl?
On Thu, May 12, 2016 at 2:21 PM, Ivan Adji - Krstev <akivanradix at gmail.com>
wrote:
> That is how i start any services or restart it or stop it. What i have
> done now is
> 1. systemctl stop syslog-ng
> 2. syslog-ng -Fevd
>
> And i have send you the output of it. I can see that I'm receiving logs
> from the clients, but im really confused how is working when its shutdown.
> Now if I execute *systemctl start syslog-ng *ill get the error.
>
> Also i have done the same procedures and they working fine. Now on a newly
> freshed installation i can't get it work.
>
> And i really don't know what to do next and where do i continue with.
>
> Kind regards
> Ivan
>
> On 05/12/2016 02:14 PM, Várady, László wrote:
>
> If I understand your problem correctly, you should just execute 'systemctl
> start syslog-ng' to start it again in daemon mode.
>
> On Thu, May 12, 2016 at 2:09 PM, Ivan Adji - Krstev <akivanradix at gmail.com
> > wrote:
>
>> Yes i guess but the syslog-ng is stop, how is it hes running ? I have
>> execute
>> *systemctl stop syslog-ng *How is that is running. And there is nothing
>> in a process or in a network:
>>
>> [root at syslogserver syslog-ng]# ps axu | grep syslog
>> root 3546 0.0 0.0 112644 964 pts/0 S+ 14:08 0:00 grep
>> --color=auto syslog
>>
>> [root at syslogserver syslog-ng]# lsof | grep LISTEN
>> sshd 825 root 3u IPv4 14259
>> 0t0 TCP *:ssh (LISTEN)
>> sshd 825 root 4u IPv6 14261
>> 0t0 TCP *:ssh (LISTEN)
>> mongod 1544 mongod 6u IPv4 15757
>> 0t0 TCP localhost:27017 (LISTEN)
>> mongod 1544 1685 mongod 6u IPv4 15757
>> 0t0 TCP localhost:27017 (LISTEN)
>> mongod 1544 1988 mongod 6u IPv4 15757
>> 0t0 TCP localhost:27017 (LISTEN)
>> mongod 1544 1989 mongod 6u IPv4 15757
>> 0t0 TCP localhost:27017 (LISTEN)
>> mongod 1544 1990 mongod 6u IPv4 15757
>> 0t0 TCP localhost:27017 (LISTEN)
>> mongod 1544 1991 mongod 6u IPv4 15757
>> 0t0 TCP localhost:27017 (LISTEN)
>> mongod 1544 1992 mongod 6u IPv4 15757
>> 0t0 TCP localhost:27017 (LISTEN)
>> mongod 1544 1993 mongod 6u IPv4 15757
>> 0t0 TCP localhost:27017 (LISTEN)
>> mongod 1544 1994 mongod 6u IPv4 15757
>> 0t0 TCP localhost:27017 (LISTEN)
>> mongod 1544 1995 mongod 6u IPv4 15757
>> 0t0 TCP localhost:27017 (LISTEN)
>> mongod 1544 1996 mongod 6u IPv4 15757
>> 0t0 TCP localhost:27017 (LISTEN)
>> mongod 1544 1999 mongod 6u IPv4 15757
>> 0t0 TCP localhost:27017 (LISTEN)
>> mongod 1544 2000 mongod 6u IPv4 15757
>> 0t0 TCP localhost:27017 (LISTEN)
>> mongod 1544 2001 mongod 6u IPv4 15757
>> 0t0 TCP localhost:27017 (LISTEN)
>> mongod 1544 2002 mongod 6u IPv4 15757
>> 0t0 TCP localhost:27017 (LISTEN)
>> mongod 1544 2003 mongod 6u IPv4 15757
>> 0t0 TCP localhost:27017 (LISTEN)
>> master 1818 root 13u IPv4 16766
>> 0t0 TCP localhost:smtp (LISTEN)
>> master 1818 root 14u IPv6 16767
>> 0t0 TCP localhost:smtp (LISTEN)
>> [root at syslogserver syslog-ng]# netstat -antup | grep 6514
>>
>> [root at syslogserver syslog-ng]#
>>
>>
>> On 05/12/2016 02:03 PM, Várady, László wrote:
>>
>> This output is all about the messages you received, so I think you have a
>> working configuration now.
>>
>> --
>> László Várady
>>
>> On Thu, May 12, 2016 at 1:49 PM, Ivan Adji - Krstev <
>> akivanradix at gmail.com> wrote:
>>
>>> Sorry about the previus messages i was testing and so that i have put
>>> the wrong path of the certificates here it is *syslog-ng -Fevd *output
>>>
>>> [2016-05-12T13:48:13.274891] Filter rule evaluation begins;
>>> rule='f_cron', location='/etc/syslog-ng/syslog-ng.conf:60:18'
>>> [2016-05-12T13:48:13.274901] Filter node evaluation result;
>>> result='not-match', type='facility'
>>> [2016-05-12T13:48:13.274912] Filter rule evaluation result;
>>> result='not-match', rule='f_cron',
>>> location='/etc/syslog-ng/syslog-ng.conf:60:18'
>>> [2016-05-12T13:48:13.275397] Outgoing message; message='May 12 13:48:10
>>> syslogserver.novalocal polkitd[630]: Unregistered Authentication Agent for
>>> unix-process:3014:242607 (system bus name :1.74, object path
>>> /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
>>> (disconnected from bus)
>>> '
>>> [2016-05-12T13:48:13.275469] Outgoing message; message='May 12 13:48:11
>>> syslogserver.novalocal sshd[3012]: Connection closed by 115.85.192.40
>>> [preauth]
>>> '
>>> [2016-05-12T13:48:13.275519] Outgoing message; message='May 12 13:48:10
>>> syslogserver.novalocal systemd[1]: Stopped System Logger Daemon.
>>> '
>>>
>>> Ivan
>>>
>>> On 05/12/2016 01:43 PM, Várady, László wrote:
>>>
>>> Hi,
>>>
>>> Did you stop the syslog-ng daemon (systemctl stop syslog-ng) before
>>> running 'syslog-ng -Fevd' manually?
>>>
>>> --
>>> László Várady
>>>
>>> On Thu, May 12, 2016 at 1:16 PM, Ivan Adji - Krstev <
>>> akivanradix at gmail.com> wrote:
>>>
>>>> OK so i get syslog-ng running with the default configuration.... this
>>>> have some problem with the TLS configuration.
>>>>
>>>> What i have done i have create the certificate procedures ( self signed
>>>> certificate ) on my laptop following this article:
>>>> https://www.balabit.com/sites/default/files/documents/syslog-ng-ose-latest-guides/en/syslog-ng-tutorial-mutual-auth-tls/html/create-server-certificate.html
>>>>
>>>> So i generate the server certificate on my laptop and the other
>>>> certificates for the clients. I copy them and put the configuration.
>>>>
>>>> Any other configuration in syslog-ng.conf to put and try to working
>>>> with TLS ?
>>>>
>>>> Kind regards
>>>>
>>>>
>>>>
>>>> On 05/12/2016 12:42 PM, jrhendri wrote:
>>>>
>>>> This has to be something very basic.
>>>> Have you tried checking if another syslog server is running?
>>>> ps -aef |grep syslog
>>>>
>>>> Assuming this shows nothing, try a very simple syslog-ng config file
>>>> and a manual start on the command line.
>>>>
>>>> Make sure you check all the things in your configuration that your copy
>>>> should open beforehand.
>>>>
>>>> This should narrow down the problem I hope :-)
>>>>
>>>> Jim
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Sent from my Verizon, Samsung Galaxy smartphone
>>>>
>>>> -------- Original message --------
>>>> From: Ivan Adji - Krstev <akivanradix at gmail.com>
>>>> <akivanradix at gmail.com>
>>>> Date: 5/12/16 5:26 AM (GMT-05:00)
>>>> To: syslog-ng at lists.balabit.hu
>>>> Subject: Re: [syslog-ng] Installing Syslog-NG 3.7 on CentOS 7
>>>>
>>>> So i have install EPEL and i have install syslog-ng and mongodb and
>>>> when i start the syslog-ng service with *syslog-ng -Fevd *command i
>>>> have the following error AGAIN :).
>>>>
>>>> Im not sure what is it and how to prevent it and what to do. But i
>>>> really need this to work :(.
>>>>
>>>> [2016-05-12T05:21:10.739940] Error binding socket;
>>>> addr='AF_INET(0.0.0.0:6514)', error='Address already in use (98)'
>>>> [2016-05-12T05:21:10.739973] Error initializing message pipeline;
>>>>
>>>>
>>>> [root at syslogserver loganalyzer]# netstat -tupl
>>>> Active Internet connections (only servers)
>>>> Proto Recv-Q Send-Q Local Address Foreign Address
>>>> State PID/Program name
>>>> tcp 0 0 localhost:27017 0.0.0.0:*
>>>> LISTEN 1352/mongod
>>>> tcp 0 0 0.0.0.0:syslog-tls 0.0.0.0:*
>>>> LISTEN 11377/syslog-ng
>>>> tcp 0 0 0.0.0.0:ssh 0.0.0.0:*
>>>> LISTEN 8562/sshd
>>>> tcp 0 0 localhost:smtp 0.0.0.0:*
>>>> LISTEN 1778/master
>>>> tcp6 0 0 [::]:http [::]:*
>>>> LISTEN 11264/httpd
>>>> tcp6 0 0 [::]:ssh [::]:*
>>>> LISTEN 8562/sshd
>>>> tcp6 0 0 localhost:smtp [::]:*
>>>> LISTEN 1778/master
>>>> udp 0 0 0.0.0.0:bootpc
>>>> 0.0.0.0:* 638/dhclient
>>>> udp 0 0 0.0.0.0:60094
>>>> 0.0.0.0:* 638/dhclient
>>>> udp6 0 0 [::]:3126
>>>> [::]:* 638/dhclient
>>>>
>>>>
>>>>
>>>> [root at syslogserver loganalyzer]# lsof | grep LISTEN
>>>> mongod 1352 mongod 6u IPv4 17057
>>>> 0t0 TCP localhost:27017 (LISTEN)
>>>> mongod 1352 1393 mongod 6u IPv4 17057
>>>> 0t0 TCP localhost:27017 (LISTEN)
>>>> mongod 1352 2028 mongod 6u IPv4 17057
>>>> 0t0 TCP localhost:27017 (LISTEN)
>>>> mongod 1352 2033 mongod 6u IPv4 17057
>>>> 0t0 TCP localhost:27017 (LISTEN)
>>>> mongod 1352 2034 mongod 6u IPv4 17057
>>>> 0t0 TCP localhost:27017 (LISTEN)
>>>> mongod 1352 2138 mongod 6u IPv4 17057
>>>> 0t0 TCP localhost:27017 (LISTEN)
>>>> mongod 1352 2139 mongod 6u IPv4 17057
>>>> 0t0 TCP localhost:27017 (LISTEN)
>>>> mongod 1352 2141 mongod 6u IPv4 17057
>>>> 0t0 TCP localhost:27017 (LISTEN)
>>>> mongod 1352 2148 mongod 6u IPv4 17057
>>>> 0t0 TCP localhost:27017 (LISTEN)
>>>> mongod 1352 2404 mongod 6u IPv4 17057
>>>> 0t0 TCP localhost:27017 (LISTEN)
>>>> mongod 1352 2446 mongod 6u IPv4 17057
>>>> 0t0 TCP localhost:27017 (LISTEN)
>>>> mongod 1352 2447 mongod 6u IPv4 17057
>>>> 0t0 TCP localhost:27017 (LISTEN)
>>>> mongod 1352 2448 mongod 6u IPv4 17057
>>>> 0t0 TCP localhost:27017 (LISTEN)
>>>> mongod 1352 2449 mongod 6u IPv4 17057
>>>> 0t0 TCP localhost:27017 (LISTEN)
>>>> mongod 1352 2450 mongod 6u IPv4 17057
>>>> 0t0 TCP localhost:27017 (LISTEN)
>>>> mongod 1352 2451 mongod 6u IPv4 17057
>>>> 0t0 TCP localhost:27017 (LISTEN)
>>>> mongod 1352 11380 mongod 6u IPv4 17057
>>>> 0t0 TCP localhost:27017 (LISTEN)
>>>> master 1778 root 13u IPv4 15893
>>>> 0t0 TCP localhost:smtp (LISTEN)
>>>> master 1778 root 14u IPv6 15894
>>>> 0t0 TCP localhost:smtp (LISTEN)
>>>> sshd 8562 root 3u IPv4 23963
>>>> 0t0 TCP *:ssh (LISTEN)
>>>> sshd 8562 root 4u IPv6 23965
>>>> 0t0 TCP *:ssh (LISTEN)
>>>> httpd 11264 root 4u IPv6 32697
>>>> 0t0 TCP *:http (LISTEN)
>>>> httpd 11265 apache 4u IPv6 32697
>>>> 0t0 TCP *:http (LISTEN)
>>>> httpd 11267 apache 4u IPv6 32697
>>>> 0t0 TCP *:http (LISTEN)
>>>> httpd 11268 apache 4u IPv6 32697
>>>> 0t0 TCP *:http (LISTEN)
>>>> httpd 11269 apache 4u IPv6 32697
>>>> 0t0 TCP *:http (LISTEN)
>>>> httpd 11270 apache 4u IPv6 32697
>>>> 0t0 TCP *:http (LISTEN)
>>>> httpd 11275 apache 4u IPv6 32697
>>>> 0t0 TCP *:http (LISTEN)
>>>> httpd 11276 apache 4u IPv6 32697
>>>> 0t0 TCP *:http (LISTEN)
>>>> httpd 11277 apache 4u IPv6 32697
>>>> 0t0 TCP *:http (LISTEN)
>>>> httpd 11278 apache 4u IPv6 32697
>>>> 0t0 TCP *:http (LISTEN)
>>>> syslog-ng 11377 root 14u IPv4 34906
>>>> 0t0 TCP *:syslog-tls (LISTEN)
>>>> syslog-ng 11377 11378 root 14u IPv4 34906
>>>> 0t0 TCP *:syslog-tls (LISTEN)
>>>> syslog-ng 11377 11541 root 14u IPv4 34906
>>>> 0t0 TCP *:syslog-tls (LISTEN)
>>>> httpd 11384 apache 4u IPv6 32697
>>>> 0t0 TCP *:http (LISTEN)
>>>>
>>>>
>>>>
>>>> and the source config is as follow:
>>>>
>>>> source s_sys {
>>>> system();
>>>> unix-stream("/dev/log");
>>>> internal();
>>>> network(
>>>> port(6514)
>>>> # tcp(port(5140));
>>>> # file("/proc/kmsg" log_prefix("kernel: "));
>>>> transport("tls")
>>>> tls( key_file("/etc/syslog-ng/cert.d/serverkey.pem")
>>>> cert_file("/etc/syslog-ng/cert.d/servercert.pem")
>>>> ca_dir("/etc/syslog-ng/ca.d"))
>>>> );
>>>> };
>>>>
>>>>
>>>>
>>>>
>>>> destination d_mongodb {
>>>> mongodb(
>>>> # servers("localhost:27017")
>>>> # database("syslog")
>>>> # uri('mongodb://localhost/syslog-ng')
>>>> collection("messages")
>>>> value-pairs(
>>>> scope("selected-macros" "nv-pairs" "sdata")
>>>> )
>>>> );
>>>> };
>>>>
>>>>
>>>> Kind regards
>>>> Ivan
>>>>
>>>> On 05/10/2016 01:35 PM, Czanik, Péter wrote:
>>>>
>>>> Do you also have EPEL? The RHEL7/CentOS7 repo is built against EPEL,
>>>> as some of the dependencies are missing from the base distribution:https://fedoraproject.org/wiki/EPEL
>>>>
>>>> Bye,
>>>> Peter Czanik (CzP) <peter.czanik at balabit.com> <peter.czanik at balabit.com>
>>>> Balabit / syslog-ng upstreamhttp://czanik.blogs.balabit.com/https://twitter.com/PCzanik
>>>>
>>>>
>>>> On Tue, May 10, 2016 at 1:29 PM, Ivan Adji - Krstev<akivanradix at gmail.com> <akivanradix at gmail.com> wrote:
>>>>
>>>> Hi i note this error of mine but i try the other one:
>>>> https://copr.fedorainfracloud.org/coprs/czanik/syslog-ng37/repo/epel-7/czanik-syslog-ng37-epel-7.repo
>>>> And i have the similar errors when ever i try to install on new CentOS
>>>>
>>>> The procedure im doing is: Fresh installation of CentOS
>>>> yum update
>>>> yum install httpd php vim wget
>>>> then install mongodb ( add repo )
>>>> then install syslog-ng ( add repo )
>>>>
>>>> I'm using: CentOS Linux release 7.2.1511 (Core)
>>>> And im having the following repos:
>>>>
>>>> [root at syslogserver ~]# yum repolist
>>>> Loaded plugins: fastestmirror
>>>> Loading mirror speeds from cached hostfile
>>>> * base: mirror.switch.ch
>>>> * extras: mirror.switch.ch
>>>> * updates: mirror.switch.ch
>>>> repo id
>>>> repo name
>>>> status
>>>> base/7/x86_64
>>>> CentOS-7 - Base
>>>> 9,007
>>>> czanik-syslog-ng37/x86_64
>>>> Copr repo for syslog-ng37 owned by czanik
>>>> 59
>>>> extras/7/x86_64
>>>> CentOS-7 - Extras
>>>> 266
>>>> mongodb-org-3.2/7
>>>> MongoDB Repository
>>>> 35
>>>> updates/7/x86_64
>>>> CentOS-7 - Updates
>>>> 1,437
>>>> repolist: 10,804
>>>>
>>>>
>>>> [root at syslogserver ~]# yum install syslog-ng
>>>> Loaded plugins: fastestmirror
>>>> Loading mirror speeds from cached hostfile
>>>> * base: mirror.switch.ch
>>>> * extras: mirror.switch.ch
>>>> * updates: mirror.switch.ch
>>>> Resolving Dependencies
>>>> --> Running transaction check
>>>> ---> Package syslog-ng.x86_64 0:3.7.3-3.el7.centos will be installed
>>>> --> Processing Dependency: ivykis >= 0.36.1 for package:
>>>> syslog-ng-3.7.3-3.el7.centos.x86_64
>>>> --> Processing Dependency: libivykis.so.0(IVYKIS_0.29)(64bit) for package:
>>>> syslog-ng-3.7.3-3.el7.centos.x86_64
>>>> --> Processing Dependency: libivykis.so.0(IVYKIS_0.30)(64bit) for package:
>>>> syslog-ng-3.7.3-3.el7.centos.x86_64
>>>> --> Processing Dependency: libevtlog.so.0()(64bit) for package:
>>>> syslog-ng-3.7.3-3.el7.centos.x86_64
>>>> --> Processing Dependency: libivykis.so.0()(64bit) for package:
>>>> syslog-ng-3.7.3-3.el7.centos.x86_64
>>>> --> Processing Dependency: libnet.so.1()(64bit) for package:
>>>> syslog-ng-3.7.3-3.el7.centos.x86_64
>>>> --> Running transaction check
>>>> ---> Package libnet.x86_64 0:1.1.6-7.el7 will be installed
>>>> ---> Package syslog-ng.x86_64 0:3.7.3-3.el7.centos will be installed
>>>> --> Processing Dependency: ivykis >= 0.36.1 for package:
>>>> syslog-ng-3.7.3-3.el7.centos.x86_64
>>>> --> Processing Dependency: libivykis.so.0(IVYKIS_0.29)(64bit) for package:
>>>> syslog-ng-3.7.3-3.el7.centos.x86_64
>>>> --> Processing Dependency: libivykis.so.0(IVYKIS_0.30)(64bit) for package:
>>>> syslog-ng-3.7.3-3.el7.centos.x86_64
>>>> --> Processing Dependency: libevtlog.so.0()(64bit) for package:
>>>> syslog-ng-3.7.3-3.el7.centos.x86_64
>>>> --> Processing Dependency: libivykis.so.0()(64bit) for package:
>>>> syslog-ng-3.7.3-3.el7.centos.x86_64
>>>> --> Finished Dependency Resolution
>>>> Error: Package: syslog-ng-3.7.3-3.el7.centos.x86_64 (czanik-syslog-ng37)
>>>> Requires: libivykis.so.0(IVYKIS_0.30)(64bit)
>>>> Error: Package: syslog-ng-3.7.3-3.el7.centos.x86_64 (czanik-syslog-ng37)
>>>> Requires: libivykis.so.0()(64bit)
>>>> Error: Package: syslog-ng-3.7.3-3.el7.centos.x86_64 (czanik-syslog-ng37)
>>>> Requires: ivykis >= 0.36.1
>>>> Error: Package: syslog-ng-3.7.3-3.el7.centos.x86_64 (czanik-syslog-ng37)
>>>> Requires: libevtlog.so.0()(64bit)
>>>> Error: Package: syslog-ng-3.7.3-3.el7.centos.x86_64 (czanik-syslog-ng37)
>>>> Requires: libivykis.so.0(IVYKIS_0.29)(64bit)
>>>> You could try using --skip-broken to work around the problem
>>>> You could try running: rpm -Va --nofiles --nodigest
>>>>
>>>>
>>>> Any idea ?
>>>>
>>>>
>>>> On 05/09/2016 04:09 PM, Czanik, Péter wrote:
>>>>
>>>> Hi,
>>>>
>>>> You should add the repository using the file:https://copr.fedorainfracloud.org/coprs/czanik/syslog-ng37/repo/epel-7/czanik-syslog-ng37-epel-7.repo
>>>> to yum and not just download individual packages. You can use then
>>>> "yum install syslog-ng" which will also download all necessary
>>>> dependencies.
>>>>
>>>> Bye,
>>>> Peter Czanik (CzP) <peter.czanik at balabit.com> <peter.czanik at balabit.com>
>>>> Balabit / syslog-ng upstreamhttp://czanik.blogs.balabit.com/https://twitter.com/PCzanik
>>>>
>>>>
>>>> On Mon, May 9, 2016 at 3:07 PM, Ivan Adji - Krstev<akivanradix at gmail.com> <akivanradix at gmail.com> wrote:
>>>>
>>>> I have the following errors when i try to install Syslog-NG 3.7 on CentOS 7
>>>>
>>>>
>>>> I have problem when i try to install Syslog-NG 3.7 on CentOS 7.
>>>>
>>>> The following errors i get:
>>>>
>>>> --> Finished Dependency Resolution
>>>> Error: Package: syslog-ng-3.7.3-1.el6.x86_64 (czanik-syslog-ng37epel6)
>>>> Requires: libevtlog.so.0()(64bit)
>>>> Error: Package: syslog-ng-3.7.3-1.el6.x86_64 (czanik-syslog-ng37epel6)
>>>> Requires: libpcre.so.0()(64bit)
>>>> You could try using --skip-broken to work around the problem
>>>> You could try running: rpm -Va --nofiles --nodigest
>>>>
>>>>
>>>> Any hints on this ?
>>>>
>>>> Kind regards
>>>> Ivan
>>>>
>>>> ______________________________________________________________________________
>>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>>> Documentation:http://www.balabit.com/support/documentation/?product=syslog-ng
>>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>>
>>>>
>>>> ______________________________________________________________________________
>>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>>> Documentation:http://www.balabit.com/support/documentation/?product=syslog-ng
>>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>>
>>>>
>>>>
>>>> ______________________________________________________________________________
>>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>>> Documentation:http://www.balabit.com/support/documentation/?product=syslog-ng
>>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>>
>>>> ______________________________________________________________________________
>>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>>> Documentation: http://www.balabit.com/support/documentation/?product=syslog-ng
>>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>>
>>>>
>>>>
>>>>
>>>> ______________________________________________________________________________
>>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>>> Documentation: http://www.balabit.com/support/documentation/?product=syslog-ng
>>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>>
>>>>
>>>>
>>>>
>>>> ______________________________________________________________________________
>>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>>> Documentation:
>>>> http://www.balabit.com/support/documentation/?product=syslog-ng
>>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>>
>>>>
>>>>
>>>
>>>
>>> ______________________________________________________________________________
>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>> Documentation: http://www.balabit.com/support/documentation/?product=syslog-ng
>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>
>>>
>>>
>>>
>>> ______________________________________________________________________________
>>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>>> Documentation:
>>> http://www.balabit.com/support/documentation/?product=syslog-ng
>>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>>
>>>
>>>
>>
>>
>> ______________________________________________________________________________
>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>> Documentation: http://www.balabit.com/support/documentation/?product=syslog-ng
>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>
>>
>>
>>
>> ______________________________________________________________________________
>> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
>> Documentation:
>> http://www.balabit.com/support/documentation/?product=syslog-ng
>> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>>
>>
>>
>
>
> ______________________________________________________________________________
> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
> Documentation: http://www.balabit.com/support/documentation/?product=syslog-ng
> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>
>
>
>
> ______________________________________________________________________________
> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
> Documentation:
> http://www.balabit.com/support/documentation/?product=syslog-ng
> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.balabit.hu/pipermail/syslog-ng/attachments/20160512/34359c4f/attachment-0001.htm
More information about the syslog-ng
mailing list