[syslog-ng] a log message is output in the two line

[Scheidler, Balázs]

For some reason the log-msg-size() setting wasn't effective. Clearly
syslog-ng split the line at 8192 bytes. It could either be the client or
the server, but I would vote for the client being the culprit.

syslog-ng emits a debug message that starts like: "Incoming message", there
you should see what was received as a single entry. My guess is that you'll
see the line split there.

This way you can pinpoint which one is the culprit (the client or the
server).
On Jun 24, 2016 11:41 AM, "Hirose, Shinsaku" <hirose.shinsaku at jp.fujitsu.com>
wrote:

> Dear Sandor
>
> Thank you for your quick responce.
>
> > UDP transport limits datagram size to 64k
>
> OK. Thanks!
>
> I raised log_msg_size to higer value.
> But the behavior did not changed.
>
> I added ' log_msg_size (16384);' in options on the two hosts.
> ------------------------------------------------------------
> options {
>         flush_lines (0);
>         time_reopen (10);
>         log_fifo_size (1000);
>         long_hostnames (off);
>         use_dns (no);
>         use_fqdn (no);
>         create_dirs (no);
>         keep_hostname (yes);
>         log_msg_size (16384);
> };
> ------------------------------------------------------------
>
> And I did restarting service.
> But the behavior did not changed.
>
> Do you know this reason?
>
> Best regards,
>
>
>
>
> -----Original Message-----
> From: syslog-ng-bounces at lists.balabit.hu [mailto:
> syslog-ng-bounces at lists.balabit.hu] On Behalf Of Sandor Geller
> Sent: Friday, June 24, 2016 11:32 PM
> To: syslog-ng at lists.balabit.hu
> Subject: Re: [syslog-ng] a log message is output in the two line
>
> Hi,
>
> On 06/24/2016 04:10 PM, Hirose, Shinsaku wrote:
> > Hello, all,
> >
> > I use syslog-ng-3.2.5-4.el6.x86_64 on Centos6.
> > I got it from eple epel repository.
> >
> > I am troubled in how to use the source file driver.
> > The touble is that a log message is output in the two lines on remote
> syslog server.
> >
> > How to reproduce is followings.
> >
> > 1. Prepare two hosts running syslog-ng.
> >
> >    Host_A configuration is followings.
> >    ----------------------------------------
> >    source test {
> >      file("/tmp/a.log");
> >    };
> >    destination d_remote { udp("192.168.0.2"); };
> >    log { source(test); destination(d_remote); };
> >    ----------------------------------------
>
> UDP transport limits datagram size to 64k
>
> >    Host_B(192.168.0.2) configuration is defaults.
> >
> > 2.Execute following command on Host_A.
> >
> >    $ seq 8193 | (xargs -i echo -n "a";echo "") >> /tmp/a.log
> >
> > 3.Check the log on Host_B.
> >
> >    As the result, a log message is output in the two lines on Host_B.
> >
> >    One line is following. The num of "a" is 8192.
> >    aaaaaaaaaaaaa.......
> >
> >    The other line is following. The num of "a" is 1.
> >    a
> >
> > I hope a log message is output in the one line on Host_B.
> > Is my hope readily achievable?
>
>
> syslog isn't rsync so the syslog standards must get taken into account.
> Original syslog was designed to work with single-line, small messages (up
> to 1k) fitting into a single UDP packet to avoid fragmentating the datagram.
>
> IIRC the maximal message size in syslog-ng defaults to 8192 bytes, so from
> stream-like sources input will be splitted when this length is reached.
>
> > Please advise me.
>
> You can raise log_msg_size to higer value but don't expect that values
> larger than 64k will work with the udp() transport. You should switch to
> another transport driver like tcp() or even better to syslog()
>
> Regards,
>
> Sandor
>
>
> ______________________________________________________________________________
> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
> Documentation:
> http://www.balabit.com/support/documentation/?product=syslog-ng
> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>
>
> ______________________________________________________________________________
> Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
> Documentation:
> http://www.balabit.com/support/documentation/?product=syslog-ng
> FAQ: http://www.balabit.com/wiki/syslog-ng-faq
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.balabit.hu/pipermail/syslog-ng/attachments/20160624/1d071c7c/attachment.htm