[syslog-ng]RE: Recommended windows event logger products to work with syslog-ng

SOLIS, ALEX syslog-ng@lists.balabit.hu
Fri, 22 Apr 2005 13:23:39 -0500 

=0D=0ADo you experience corrupt Windows event logs often=3F  I seem to get =
at=0D=0Aleast one corrupt event log every month.  Do you see a similar (or =
any)=0D=0Afrequency of corrupt event logs in your environment=3F=0D=0A=0D=0A=
PS. I mistyped the URL before for NT-syslog.  More info can be found at=0D=0A=
http://ntsyslog.sourceforge.net=0D=0A=0D=0A=0D=0A-----Original Message-----=0D=
=0AFrom: syslog-ng-admin@lists.balabit.hu=0D=0A[mailto:syslog-ng-admin@list=
s.balabit.hu] On Behalf Of Adams, Russell L.=0D=0ASent: Thursday, April 21,=
 2005 10:15 PM=0D=0ATo: syslog-ng@lists.balabit.hu=0D=0ASubject: Re: [syslo=
g-ng]RE: Recommended windows event logger products to=0D=0Awork with syslog=
-ng=0D=0A=0D=0AAllow me to clarify on the corrupt event log we experienced.=0D=
=0A=0D=0ASpecifically, the Windows server in question had it's event log=0D=
=0Acorrupted. When Event Reporter tried to read it, it would die and=0D=0Ar=
estart and try to send the same logs again.=0D=0A=0D=0AThe symptoms were im=
mediately obvious because when looking at the=0D=0Aevent log in Windows, it=
 kept giving popup messages that the event log=0D=0Awas corrupt and would q=
uit. Trying to sort the messages would trigger=0D=0Ait every time.=0D=0A=0D=
=0AThe fix was to remove and recreate the Windows event log, and then=0D=0A=
Event Reporter resumed its normal behavior.=0D=0A=0D=0ARussell=0D=0A=0D=0AO=
n Thu, Apr 21, 2005 at 05:41:00PM -0500, Adams, Russell L. wrote:=0D=0A> We=
're using Event Reporter.=0D=0A>=20=0D=0A> Only problem we've had is a corr=
upt event log caused it to repeatedly=0D=0A> send the few hours messages no=
nstop.=0D=0A>=20=0D=0A> Russell=0D=0A>=20=0D=0A> On Thu, Apr 21, 2005 at 10=
:54:32AM +0100, Stevan Popovic wrote:=0D=0A> >=20=0D=0A> > Hello=0D=0A> > =0D=
=0A> > I have configured syslog-ng to work on my linux box.=20=0D=0A> >=20=0D=
=0A> > I am wondering does anyone use syslog-ng to log windows event logs.=0D=
=0AIf so which products from the windows side are used=3F=0D=0A> >=20=0D=0A=
> > TIA=0D=0A> >=20=0D=0A> > -----Original Message-----=0D=0A> > From: sysl=
og-ng-request@lists.balabit.hu=0D=0A> > [mailto:syslog-ng-request@lists.bal=
abit.hu]=0D=0A> > Sent: 19 April 2005 17:06=0D=0A> > To: syslog-ng@lists.ba=
labit.hu=0D=0A> > Subject: [SPAM] - syslog-ng digest, Vol 1 #1228 - 9 msgs =
- Email=0D=0Afound=0D=0A> > in subject=0D=0A> >=20=0D=0A> >=20=0D=0A> > Sen=
d syslog-ng mailing list submissions to=0D=0A> > =09syslog-ng@lists.balabit=
=2Ehu=0D=0A> >=20=0D=0A> > To subscribe or unsubscribe via the World Wide W=
eb, visit=0D=0A> > =09https://lists.balabit.hu/mailman/listinfo/syslog-ng=0D=
=0A> > or, via email, send a message with subject or body 'help' to=0D=0A> =
> =09syslog-ng-request@lists.balabit.hu=0D=0A> >=20=0D=0A> > You can reach =
the person managing the list at=0D=0A> > =09syslog-ng-admin@lists.balabit.h=
u=0D=0A> >=20=0D=0A> > When replying, please edit your Subject line so it i=
s more specific=0D=0A> > than "Re: Contents of syslog-ng digest..."=0D=0A> =
>=20=0D=0A> >=20=0D=0A> > Today's Topics:=0D=0A> >=20=0D=0A> >    1. RE: Re=
: [syslog-ng]can't compile syslog in HP-UX 11.23=0D=0A(skywalk2@netian.com)=0D=
=0A> >    2. RE: Re: [syslog-ng]can't compile syslog in HP-UX 11.23 (Balazs=0D=
=0AScheidler)=0D=0A> >    3. Bug: nul chars at end of log lines (W. Borgert=
)=0D=0A> >    4. Re: Bug: nul chars at end of log lines (Balazs Scheidler)=0D=
=0A> >    5. Re: trouble configuring syslog-ng with libraries (John=0D=0ATh=
rumston)=0D=0A> >    6. Re: Bug: nul chars at end of log lines (W. Borgert)=0D=
=0A> >    7. Re: trouble configuring syslog-ng with libraries (Balazs=0D=0A=
Scheidler)=0D=0A> >    8. Re: trouble configuring syslog-ng with libraries =
(John=0D=0AThrumston)=0D=0A> >    9. RE: Logging Java stack traces with sys=
log-ng and log4j=0D=0A(Vaibhav Goel)=0D=0A> >=20=0D=0A> > --__--__--=0D=0A>=
 >=20=0D=0A> > Message: 1=0D=0A> > From: <skywalk2@netian.com>=0D=0A> > To:=
 <syslog-ng@lists.balabit.hu>=0D=0A> > Subject: RE: Re: [syslog-ng]can't co=
mpile syslog in HP-UX 11.23=0D=0A> > Date: Tue, 19 Apr 2005 16:00:41 +0900=0D=
=0A> > Reply-To: syslog-ng@lists.balabit.hu=0D=0A> >=20=0D=0A> > I applied =
the patch that you submitted, Bazsi=0D=0A> > But I got many warnings in 'yy=
__' things when I did  'make'=0D=0A> > and also when I did 'make install', =
I got the same warnings=0D=0A> > (The binary file 'syslog-ng' was created, =
but I could'nt start=0D=0Asyslog-ng=0D=0A> > properly)=0D=0A> >=20=0D=0A> >=
 For your information,=0D=0A> > Before I 've posted my problems on mailing-=
list in the first time=0D=0A> > I 've modified the 'configure' file once=0D=
=0A> > (deleted the ' -Wl,-Bstatic' '-Wl,-Bdynamic' ld options in line 7455=0D=
=0Ajust=0D=0A> > like below)=0D=0A> > =3D> LIBS=3D"$LIBS $LIBOL_LIBS $LEXLI=
B $LIBWRAP_LIBS $LIBNET_LIBS "=0D=0A> >=20=0D=0A> > and once I've used 'ena=
ble_full_static' option when running=0D=0A'configure'=0D=0A> >=20=0D=0A> > =
In the above two cases, I got the same problems like applying the=0D=0Apatc=
h=0D=0A> > submitted=0D=0A> >=20=0D=0A> > Really thanks for your considerat=
ion once more, though I 've got=0D=0Aanother=0D=0A> > problems=0D=0A> > And=
 errors(warnings) are belows=0D=0A> >=20=0D=0A> >=20=0D=0A> > ----- warning=
 when running 'make' ---------------=0D=0A> >=20=0D=0A> > /usr/local/bin/gc=
c  -g -O2 -Wall -I/home/libol-0.3.15/src=0D=0A-D_GNU_SOURCE   -=0D=0A> > o =
test_nscache  test_nscache.o ../nscache.o -lnsl  /home/libol-=0D=0A> > 0.3.=
15/src/.libs/libol.a -lnsl -lxnet -ll -lwrap =20=0D=0A> > ld: (Warning) Uns=
atisfied symbol "yyleng" in file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: =
(Warning) Unsatisfied symbol "yylenguc" in file=0D=0A/usr/lib/hpux32/libl.s=
o=0D=0A> > ld: (Warning) Unsatisfied symbol "yyinput" in file=0D=0A/usr/lib=
/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol "yyunput" in file=0D=
=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol "yyols=
p" in file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied =
symbol "yytext" in file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: (Warning)=
 Unsatisfied symbol "yyoutput" in file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> =
> ld: (Warning) Unsatisfied symbol "yytextuc" in file=0D=0A/usr/lib/hpux32/=
libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol "yyextra" in file=0D=0A/u=
sr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol "yyfnd" in =
file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol=
 "yyprevious" in file=0D=0A> > /usr/lib/hpux32/libl.so=0D=0A> > ld: (Warnin=
g) Unsatisfied symbol "yylex" in file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> >=
 ld: (Warning) Unsatisfied symbol "yylsp" in file=0D=0A/usr/lib/hpux32/libl=
=2Eso=0D=0A> > ld: (Warning) Unsatisfied symbol "yyout" in file=0D=0A/usr/l=
ib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol "deny_severity"=
 in file=0D=0A> > /usr/lib/hpux32/libwrap.so=0D=0A> > ld: (Warning) Unsatis=
fied symbol "allow_severity" in file=0D=0A> > /usr/lib/hpux32/libwrap.so=0D=
=0A> > ld: (Warning) Unsatisfied symbol "yylstate" in file=0D=0A/usr/lib/hp=
ux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol "yytextarr" in file=0D=
=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol "yybac=
k" in file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied =
symbol "rfc931_timeout" in file=0D=0A> > /usr/lib/hpux32/libwrap.so=0D=0A> =
> 20 warnings.=0D=0A> >=20=0D=0A> >=20=0D=0A> > ----------- warning when ru=
nning 'make install' ---------------=0D=0A> >=20=0D=0A> > Making install in=
 .=0D=0A> >         /usr/local/bin/gcc  -g -O2 -Wall -I/home/libol-0.3.15/s=
rc -=0D=0A> > D_GNU_SOURCE   -o syslog-ng  main.o sources.o center.o  filte=
rs.o=0D=0A> > destinations.o log.o  cfgfile.o cfg-grammar.o cfg-lex.o  affi=
le.o=0D=0A> > afsocket.o afunix.o  afinet.o afinter.o afuser.o  afstreams.o=0D=
=0Aafprogram.o=0D=0A> > afremctrl.o  nscache.o utils.o syslog-names.o  macr=
os.o getopt.o=0D=0Agetopt1.o -=0D=0A> > lnsl  /home/libol-0.3.15/src/.libs/=
libol.a -lnsl -lxnet -ll -lwrap =20=0D=0A> > ld: (Warning) Unsatisfied symb=
ol "yylenguc" in file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) U=
nsatisfied symbol "yyinput" in file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > l=
d: (Warning) Unsatisfied symbol "yyunput" in file=0D=0A/usr/lib/hpux32/libl=
=2Eso=0D=0A> > ld: (Warning) Unsatisfied symbol "yyolsp" in file=0D=0A/usr/=
lib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol "yyoutput" in =
file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol=
 "yytextuc" in file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) Uns=
atisfied symbol "yyextra" in file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > ld:=
 (Warning) Unsatisfied symbol "yyfnd" in file=0D=0A/usr/lib/hpux32/libl.so=0D=
=0A> > ld: (Warning) Unsatisfied symbol "yyprevious" in file=0D=0A> > /usr/=
lib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol "yylsp" in fil=
e=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol "d=
eny_severity" in file=0D=0A> > /usr/lib/hpux32/libwrap.so=0D=0A> > ld: (War=
ning) Unsatisfied symbol "allow_severity" in file=0D=0A> > /usr/lib/hpux32/=
libwrap.so=0D=0A> > ld: (Warning) Unsatisfied symbol "yylstate" in file=0D=0A=
/usr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol "yytextar=
r" in file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied =
symbol "yyback" in file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: (Warning)=
 Unsatisfied symbol "rfc931_timeout" in file=0D=0A> > /usr/lib/hpux32/libwr=
ap.so=0D=0A> > 16 warnings.=0D=0A> >         /bin/sh /home/syslog-ng-1.6.7/=
mkinstalldirs /usr/local/sbin=0D=0A> >   .././install-sh -c syslog-ng /usr/=
local/sbin/syslog-ng=0D=0A> > Making install in tests=0D=0A> >         /usr=
/local/bin/gcc  -g -O2 -Wall -I/home/libol-0.3.15/src -=0D=0A> > D_GNU_SOUR=
CE   -o test_nscache  test_nscache.o ../nscache.o -lnsl=0D=0A> > /home/libo=
l-0.3.15/src/.libs/libol.a -lnsl -lxnet -ll -lwrap =20=0D=0A> > ld: (Warnin=
g) Unsatisfied symbol "yyleng" in file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> =
> ld: (Warning) Unsatisfied symbol "yylenguc" in file=0D=0A/usr/lib/hpux32/=
libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol "yyinput" in file=0D=0A/u=
sr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol "yyunput" i=
n file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied symb=
ol "yyolsp" in file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) Uns=
atisfied symbol "yytext" in file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: =
(Warning) Unsatisfied symbol "yyoutput" in file=0D=0A/usr/lib/hpux32/libl.s=
o=0D=0A> > ld: (Warning) Unsatisfied symbol "yytextuc" in file=0D=0A/usr/li=
b/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol "yyextra" in fil=
e=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol "y=
yfnd" in file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfi=
ed symbol "yyprevious" in file=0D=0A> > /usr/lib/hpux32/libl.so=0D=0A> > ld=
: (Warning) Unsatisfied symbol "yylex" in file=0D=0A/usr/lib/hpux32/libl.so=0D=
=0A> > ld: (Warning) Unsatisfied symbol "yylsp" in file=0D=0A/usr/lib/hpux3=
2/libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol "yyout" in file=0D=0A/u=
sr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol "deny_sever=
ity" in file=0D=0A> > /usr/lib/hpux32/libwrap.so=0D=0A> > ld: (Warning) Uns=
atisfied symbol "allow_severity" in file=0D=0A> > /usr/lib/hpux32/libwrap.s=
o=0D=0A> > ld: (Warning) Unsatisfied symbol "yylstate" in file=0D=0A/usr/li=
b/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol "yytextarr" in f=
ile=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsatisfied symbol =
"yyback" in file=0D=0A/usr/lib/hpux32/libl.so=0D=0A> > ld: (Warning) Unsati=
sfied symbol "rfc931_timeout" in file=0D=0A> > /usr/lib/hpux32/libwrap.so=0D=
=0A> > 20 warnings.=0D=0A> >=20=0D=0A> >=20=0D=0A> > ----------- warning wh=
en starting 'syslog-ng' ---------------=0D=0A> >=20=0D=0A> > # /sbin/init.d=
/syslog-ng start=0D=0A> > /usr/lib/hpux32/dld.so: Unsatisfied data symbol '=
yylsp' in load=0D=0Amodule=0D=0A> > '/usr/lib/hpux32/libl.so.1'.=0D=0A> > /=
usr/lib/hpux32/dld.so: Unsatisfied data symbol 'yyolsp' in load=0D=0Amodule=0D=
=0A> > '/usr/lib/hpux32/libl.so.1'.=0D=0A> > /usr/lib/hpux32/dld.so: Unsati=
sfied data symbol 'yyfnd' in load=0D=0Amodule=0D=0A> > '/usr/lib/hpux32/lib=
l.so.1'.=0D=0A> > /usr/lib/hpux32/dld.so: Unsatisfied data symbol 'yytextuc=
' in load=0D=0Amodule=0D=0A> > '/usr/lib/hpux32/libl.so.1'.=0D=0A> > /usr/l=
ib/hpux32/dld.so: Unsatisfied data symbol 'yylenguc' in load=0D=0Amodule=0D=
=0A> > '/usr/lib/hpux32/libl.so.1'.=0D=0A> > /usr/lib/hpux32/dld.so: Unsati=
sfied data symbol 'yylstate' in load=0D=0Amodule=0D=0A> > '/usr/lib/hpux32/=
libl.so.1'.=0D=0A> > /usr/lib/hpux32/dld.so: Unsatisfied data symbol 'yypre=
vious' in load=0D=0Amodule=0D=0A> > '/usr/lib/hpux32/libl.so.1'.=0D=0A> > /=
usr/lib/hpux32/dld.so: Unsatisfied data symbol 'yytextarr' in load=0D=0Amod=
ule=0D=0A> > '/usr/lib/hpux32/libl.so.1'.=0D=0A> > /usr/lib/hpux32/dld.so: =
Unsatisfied data symbol 'yyextra' in load=0D=0Amodule=0D=0A> > '/usr/lib/hp=
ux32/libl.so.1'.=0D=0A> > /sbin/init.d/syslog-ng[89]: 19984 Killed=0D=0A> >=
 EXIT CODE: 137=0D=0A> >=20=0D=0A> > -----Original Message-----=0D=0A> > Fr=
om: syslog-ng-admin@lists.balabit.hu [mailto:syslog-ng-=0D=0A> > admin@list=
s.balabit.hu] On Behalf Of Balazs Scheidler=0D=0A> > Sent: Monday, April 18=
, 2005 6:09 PM=0D=0A> > To: syslog-ng@lists.balabit.hu=0D=0A> > Subject: Re=
: Re: [syslog-ng]can't compile syslog in HP-UX 11.23=0D=0A> >=20=0D=0A> > O=
n Mon, 2005-04-18 at 17:26 +0900, XX XXXX wrote:=0D=0A> > > Thank You Bazsi=
 for your consideration :) I'll apply it as soon as=0D=0A=0D=0A> > > possib=
le=0D=0A> > >=20=0D=0A> > > "ld -V" output is as follows=0D=0A> > >=20=0D=0A=
> > > ld: 92453-07 linker ld HP Itanium(R) B.12.23 PBO 040721 (IPF/IPF)=0D=0A=
> > > ld: No input files=0D=0A> > > Fatal error.=0D=0A> > >=20=0D=0A> >=20=0D=
=0A> > Can you check if applying this patch autodetects you ld options=0D=0A=
correctly=3F=0D=0A> >=20=0D=0A> >=20=0D=0A> > --__--__--=0D=0A> >=20=0D=0A>=
 > Message: 2=0D=0A> > Subject: RE: Re: [syslog-ng]can't compile syslog in =
HP-UX 11.23=0D=0A> > From: Balazs Scheidler <bazsi@balabit.hu>=0D=0A> > To:=
 syslog-ng@lists.balabit.hu=0D=0A> > Date: Tue, 19 Apr 2005 10:28:02 +0200=0D=
=0A> > Reply-To: syslog-ng@lists.balabit.hu=0D=0A> >=20=0D=0A> > On Tue, 20=
05-04-19 at 16:00 +0900, skywalk2@netian.com wrote:=0D=0A> > > I applied th=
e patch that you submitted, Bazsi=0D=0A> > > But I got many warnings in 'yy=
__' things when I did  'make'=0D=0A> > > and also when I did 'make install'=
, I got the same warnings=0D=0A> > > (The binary file 'syslog-ng' was creat=
ed, but I could'nt start=0D=0Asyslog-ng=0D=0A> > > properly)=0D=0A> > >=20=0D=
=0A> > > For your information,=0D=0A> > > Before I 've posted my problems o=
n mailing-list in the first time=0D=0A> > > I 've modified the 'configure' =
file once=0D=0A> > > (deleted the ' -Wl,-Bstatic' '-Wl,-Bdynamic' ld option=
s in line=0D=0A7455 just=0D=0A> > > like below)=0D=0A> > > =3D> LIBS=3D"$LI=
BS $LIBOL_LIBS $LEXLIB $LIBWRAP_LIBS $LIBNET_LIBS "=0D=0A> > >=20=0D=0A> > =
> and once I've used 'enable_full_static' option when running=0D=0A'configu=
re'=0D=0A> > >=20=0D=0A> > > In the above two cases, I got the same problem=
s like applying the=0D=0Apatch=0D=0A> > > submitted=0D=0A> > >=20=0D=0A> > =0D=
=0A> > As I see from the link command line no option was added to it, e.g.=0D=
=0Ait=0D=0A> > linked without trying to link statically. This happened eith=
er=0D=0Abecause=0D=0A> > you did not rerun the configure script, or not reg=
enerated it using=0D=0A> > autoconf.=0D=0A> >=20=0D=0A> > The other problem=
s are that for some reason your libl.so library=0D=0Adoes=0D=0A> > not seem=
 to match the lexing code in syslog-ng.=0D=0A> >=20=0D=0A> > Although libl.=
so on other platforms seems to be ok, maybe on HP-UX=0D=0Athis=0D=0A> > is =
not the case. Could you try installing GNU flex and verify that=0D=0A> > sy=
slog-ng links to libfl.{so,a} instead of libl.so =3F=0D=0A> >=20=0D=0A> > -=
-=20=0D=0A> > Bazsi=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> > --__--__--=0D=
=0A> >=20=0D=0A> > Message: 3=0D=0A> > Date: Tue, 19 Apr 2005 12:13:03 +020=
0=0D=0A> > From: "W. Borgert" <debacle@debian.org>=0D=0A> > To: syslog-ng@l=
ists.balabit.hu=0D=0A> > Subject: [syslog-ng]Bug: nul chars at end of log l=
ines=0D=0A> > Reply-To: syslog-ng@lists.balabit.hu=0D=0A> >=20=0D=0A> > Hi,=0D=
=0A> >=20=0D=0A> > I reported this on 2004-11-24 as Debian bug against vers=
ion 1.6.4,=0D=0A> > but I'm curious, whether problem is known on other plat=
forms, too.=0D=0A> > (See http://bugs.debian.org/cgi-bin/bugreport.cgi=3Fbu=
g=3D282782)=0D=0A> >=20=0D=0A> > A nul character at the end of an UDP trans=
ferred log message is=0D=0A> > included in the actual syslog file.  In the =
terminal window the=0D=0A> > character is shown as ^@.  Two problems: It lo=
oks ugly and it=0D=0A> > makes the file look "binary" to tools such as grep=
, which does=0D=0A> > not print lines anymore, but says "Binary file matche=
s" :-(=0D=0A> >=20=0D=0A> > A test script to (< 15 lines of code) reproduce=
 the behaviour=0D=0A> > can be downloaded from here:=0D=0A> >=0D=0Ahttp://b=
ugs.debian.org/cgi-bin/bugreport.cgi/logtest.py=3Fbug=3D282782&msg=3D3=0D=0A=
&att=3D1=0D=0A> >=20=0D=0A> > Don't forget to enable udp() as source, if yo=
u run the test.=0D=0A> >=20=0D=0A> > Cheers, WB=0D=0A> >=20=0D=0A> > --__--=
__--=0D=0A> >=20=0D=0A> > Message: 4=0D=0A> > Subject: Re: [syslog-ng]Bug: =
nul chars at end of log lines=0D=0A> > From: Balazs Scheidler <bazsi@balabi=
t.hu>=0D=0A> > To: syslog-ng@lists.balabit.hu=0D=0A> > Date: Tue, 19 Apr 20=
05 12:15:55 +0200=0D=0A> > Reply-To: syslog-ng@lists.balabit.hu=0D=0A> > =0D=
=0A> > On Tue, 2005-04-19 at 12:13 +0200, W. Borgert wrote:=0D=0A> > > Hi,=0D=
=0A> > >=20=0D=0A> > > I reported this on 2004-11-24 as Debian bug against =
version 1.6.4,=0D=0A> > > but I'm curious, whether problem is known on othe=
r platforms, too.=0D=0A> > > (See http://bugs.debian.org/cgi-bin/bugreport.=
cgi=3Fbug=3D282782)=0D=0A> > >=20=0D=0A> > > A nul character at the end of =
an UDP transferred log message is=0D=0A> > > included in the actual syslog =
file.  In the terminal window the=0D=0A> > > character is shown as ^@.  Two=
 problems: It looks ugly and it=0D=0A> > > makes the file look "binary" to =
tools such as grep, which does=0D=0A> > > not print lines anymore, but says=
 "Binary file matches" :-(=0D=0A> > >=20=0D=0A> > > A test script to (< 15 =
lines of code) reproduce the behaviour=0D=0A> > > can be downloaded from he=
re:=0D=0A> > >=0D=0Ahttp://bugs.debian.org/cgi-bin/bugreport.cgi/logtest.py=
=3Fbug=3D282782&msg=3D3=0D=0A&att=3D1=0D=0A> > >=20=0D=0A> > > Don't forget=
 to enable udp() as source, if you run the test.=0D=0A> >=20=0D=0A> > This =
should have already been fixed in 1.6.5=0D=0A> >=20=0D=0A> > --=20=0D=0A> >=
 Bazsi=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> > --__--__--=0D=0A> >=20=0D=
=0A> > Message: 5=0D=0A> > Date: Tue, 19 Apr 2005 06:42:10 -0700 (PDT)=0D=0A=
> > From: John Thrumston <john_thrumston@yahoo.com>=0D=0A> > Subject: Re: [=
syslog-ng]trouble configuring syslog-ng with libraries=0D=0A> > To: syslog-=
ng@lists.balabit.hu=0D=0A> > Reply-To: syslog-ng@lists.balabit.hu=0D=0A> > =0D=
=0A> > --0-2016648080-1113918130=3D:52861=0D=0A> > Content-Type: text/plain=
; charset=3Dus-ascii=0D=0A> >=20=0D=0A> > I am still having trouble with th=
is. I am working on it. One=0D=0Aquestion I have that I don't see answered =
anywhere (maybe I am just=0D=0Ablind). But do you have to run syslog-ng on =
each server you want to log=0D=0Ato the logserver=3F Is this something I ha=
ve to do for each of my=0D=0Amachines=3F I am not sure I completely underst=
and the process.=0D=0A> >=20=0D=0A> > Balazs Scheidler <bazsi@balabit.hu> w=
rote:On Thu, 2005-04-14 at=0D=0A12:03 -0700, John Thrumston wrote:=0D=0A> >=
 > I tried the ./configure --enable-dynamic-linking as it suggests,=0D=0Ago=
t=0D=0A> > > the exact same results.=20=0D=0A> > >=20=0D=0A> > > Sunfreewar=
e has a newer version of GLIB (SMCglib-2.6.2 out there.=20=0D=0A> > > My qu=
estions are, if I add that package.=20=0D=0A> > > 1) how will the server kn=
ow which version to use=3F=20=0D=0A> > > 2. Will this corrupt any other pac=
kages that may currently be=0D=0Ausing=0D=0A> > > the SUNWGlib that was ins=
talled=3F=0D=0A> > >=20=0D=0A> > > Sorry to ask all these questions, I just=
 don't know library=0D=0Afunctions=0D=0A> > > very well and don't want to b=
low the box up so to speak.=0D=0A> >=20=0D=0A> >=20=0D=0A> > hm. the config=
ure test checking static glib does not check whether=0D=0A> > --enable-dyna=
mic-linking was specified and always errors out.=0D=0A> >=20=0D=0A> > This =
patch should fix it:=0D=0A> >=20=0D=0A> > --- orig/configure.in=0D=0A> > ++=
+ mod/configure.in=0D=0A> > @@ -113,7 +113,7 @@=0D=0A> > blb_cv_static_glib=
=3Dno)])=0D=0A> > LIBS=3D$old_LIBS=0D=0A> >=20=0D=0A> > -if test "x$blb_cv_=
static_glib" =3D "xno"; then=0D=0A> > +if test "x$enable_dynamic_linking" =3D=
 "xno" -a=0D=0A"x$blb_cv_static_glib" =3D "xno"; then=0D=0A> > AC_MSG_ERROR=
([static GLib libraries not found, either link GLib=0D=0Adynamically using =
the --enable-dynamic-linking or install a static=0D=0AGLib])=0D=0A> > fi=0D=
=0A> >=20=0D=0A> >=20=0D=0A> > You'll need to regenerate the configure scri=
pt after patching it=20=0D=0A> > (using autoconf), alternatively you could =
also comment out this=0D=0Acheck=0D=0A> > from the already generated config=
ure script.=0D=0A> >=20=0D=0A> > --=20=0D=0A> > Bazsi=0D=0A> >=20=0D=0A> > =0D=
=0A> > _______________________________________________=0D=0A> > syslog-ng m=
aillist - syslog-ng@lists.balabit.hu=0D=0A> > https://lists.balabit.hu/mail=
man/listinfo/syslog-ng=0D=0A> > Frequently asked questions at=0D=0Ahttp://w=
ww.campin.net/syslog-ng/faq.html=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A>=
 > =09=09=0D=0A> > ---------------------------------=0D=0A> > Do you Yahoo!=
=3F=0D=0A> >  Yahoo! Mail - Find what you need with new enhanced search. Le=
arn=0D=0Amore.=0D=0A> > --0-2016648080-1113918130=3D:52861=0D=0A> > Content=
-Type: text/html; charset=3Dus-ascii=0D=0A> >=20=0D=0A> > <DIV>I am still h=
aving trouble with this. I am working on it. One=0D=0Aquestion I have that =
I don't see answered anywhere (maybe I am just=0D=0Ablind). But do you have=
 to run syslog-ng on each server you want to log=0D=0Ato the logserver=3F I=
s this something I have to do for each of my=0D=0Amachines=3F I am not sure=
 I completely understand the=0D=0Aprocess.<BR><BR><B><I>Balazs Scheidler &l=
t;bazsi@balabit.hu&gt;</I></B>=0D=0Awrote:=0D=0A> > <BLOCKQUOTE class=3Drep=
lbq style=3D"PADDING-LEFT: 5px; MARGIN-LEFT: 5px;=0D=0ABORDER-LEFT: #1010ff=
 2px solid">On Thu, 2005-04-14 at 12:03 -0700, John=0D=0AThrumston wrote:<B=
R>&gt; I tried the ./configure=0D=0A--enable-dynamic-linking as it suggests=
, got<BR>&gt; the exact same=0D=0Aresults. <BR>&gt; <BR>&gt; Sunfreeware ha=
s a newer version of GLIB=0D=0A(SMCglib-2.6.2 out there. <BR>&gt; My questi=
ons are, if I add that=0D=0Apackage. <BR>&gt; 1) how will the server know w=
hich version to use=3F=0D=0A<BR>&gt; 2. Will this corrupt any other package=
s that may currently be=0D=0Ausing<BR>&gt; the SUNWGlib that was installed=3F=
<BR>&gt; <BR>&gt; Sorry to=0D=0Aask all these questions, I just don't know =
library functions<BR>&gt;=0D=0Avery well and don't want to blow the box up =
so to speak.<BR><BR><BR>hm.=0D=0Athe configure test checking static glib do=
es not check=0D=0Awhether<BR>--enable-dynamic-linking was specified and alw=
ays errors=0D=0Aout.<BR><BR>This patch should fix it:<BR><BR>---=0D=0Aorig/=
configure.in<BR>+++ mod/configure.in<BR>@@ -113,7 +113,7=0D=0A> >  @@<BR>bl=
b_cv_static_glib=3Dno)])<BR>LIBS=3D$old_LIBS<BR><BR>-if test=0D=0A"x$blb_cv=
_static_glib" =3D "xno"; then<BR>+if test=0D=0A"x$enable_dynamic_linking" =3D=
 "xno" -a "x$blb_cv_static_glib" =3D "xno";=0D=0Athen<BR>AC_MSG_ERROR([stat=
ic GLib libraries not found, either link GLib=0D=0Adynamically using the --=
enable-dynamic-linking or install a static=0D=0AGLib])<BR>fi<BR><BR><BR>You=
'll need to regenerate the configure script=0D=0Aafter patching it <BR>(usi=
ng autoconf), alternatively you could also=0D=0Acomment out this check<BR>f=
rom the already generated configure=0D=0Ascript.<BR><BR>--=0D=0A<BR>Bazsi<B=
R><BR><BR>_______________________________________________<BR>=0D=0Asyslog-n=
g maillist -=0D=0Asyslog-ng@lists.balabit.hu<BR>https://lists.balabit.hu/ma=
ilman/listinfo/=0D=0Asyslog-ng<BR>Frequently asked questions at=0D=0Ahttp:/=
/www.campin.net/syslog-ng/faq.html<BR><BR></BLOCKQUOTE></DIV><p>=0D=0A> > =09=
=09<hr size=3D1>Do you Yahoo!=3F<br>=20=0D=0A> > Yahoo! Mail - Find what yo=
u need with new enhanced search. <a=0D=0Ahref=3D"http://us.rd.yahoo.com/evt=
=3D29917/*http://info.mail.yahoo.com/mail_=0D=0A250">Learn more.</a>=0D=0A>=
 > --0-2016648080-1113918130=3D:52861--=0D=0A> >=20=0D=0A> > --__--__--=0D=0A=
> >=20=0D=0A> > Message: 6=0D=0A> > Date: Tue, 19 Apr 2005 15:55:21 +0200=0D=
=0A> > From: "W. Borgert" <debacle@debian.org>=0D=0A> > To: syslog-ng@lists=
=2Ebalabit.hu=0D=0A> > Subject: [syslog-ng]Re: Bug: nul chars at end of log=
 lines=0D=0A> > Reply-To: syslog-ng@lists.balabit.hu=0D=0A> >=20=0D=0A> > O=
n Tue, 19 Apr 2005 12:15:55 +0200, Balazs Scheidler wrote:=0D=0A> > > This =
should have already been fixed in 1.6.5=0D=0A> >=20=0D=0A> > I tried my tes=
t script and I can still see the nul char :-(=0D=0A> > Debian GNU/Linux "sa=
rge", syslog-ng version 1.6.5-2.  Could=0D=0A> > you please try this on you=
r system=3F  Thanks in advance!=0D=0A> >=20=0D=0A> > Cheers, WB=0D=0A> > =0D=
=0A> > --__--__--=0D=0A> >=20=0D=0A> > Message: 7=0D=0A> > Subject: Re: [sy=
slog-ng]trouble configuring syslog-ng with libraries=0D=0A> > From: Balazs =
Scheidler <bazsi@balabit.hu>=0D=0A> > To: syslog-ng@lists.balabit.hu=0D=0A>=
 > Date: Tue, 19 Apr 2005 16:31:06 +0200=0D=0A> > Reply-To: syslog-ng@lists=
=2Ebalabit.hu=0D=0A> >=20=0D=0A> > On Tue, 2005-04-19 at 06:42 -0700, John =
Thrumston wrote:=0D=0A> > > I am still having trouble with this. I am worki=
ng on it. One=0D=0Aquestion=0D=0A> > > I have that I don't see answered any=
where (maybe I am just blind).=0D=0ABut=0D=0A> > > do you have to run syslo=
g-ng on each server you want to log to the=0D=0A> > > logserver=3F Is this =
something I have to do for each of my machines=3F=0D=0AI=0D=0A> > > am not =
sure I completely understand the process.=0D=0A> >=20=0D=0A> > not necessar=
ily, syslog-ng supports the good old UDP based syslog=0D=0A> > protocol.=0D=
=0A> >=20=0D=0A> > one minor note: if you are not that experienced you migh=
t want to=0D=0Astick=0D=0A> > to a stable release (currently 1.6.7) and not=
 a BETA grade software=0D=0Alike=0D=0A> > 1.9.4 is.=0D=0A> >=20=0D=0A> > --=
=20=0D=0A> > Bazsi=0D=0A> >=20=0D=0A> >=20=0D=0A> >=20=0D=0A> > --__--__--=0D=
=0A> >=20=0D=0A> > Message: 8=0D=0A> > Date: Tue, 19 Apr 2005 08:28:42 -070=
0 (PDT)=0D=0A> > From: John Thrumston <john_thrumston@yahoo.com>=0D=0A> > S=
ubject: Re: [syslog-ng]trouble configuring syslog-ng with libraries=0D=0A> =
> To: syslog-ng@lists.balabit.hu=0D=0A> > Reply-To: syslog-ng@lists.balabit=
=2Ehu=0D=0A> >=20=0D=0A> > --0-1852989970-1113924522=3D:91452=0D=0A> > Cont=
ent-Type: text/plain; charset=3Dus-ascii=0D=0A> >=20=0D=0A> > I have done j=
ust that, I have version 1.6.5 put when I try and=0D=0Aconfigure it, it tel=
ls me that it found libol 0.3.14 and tells me=0D=0A> > checking libol versi=
on >=3D 0.3.14... configure: error: libol-config=0D=0Anot found in the spec=
ified location.=0D=0A> > So I tried the ./configure --with-libol=3D/usr/loc=
al/lib  and that=0D=0Astill gave me the same result.=0D=0A> > =20=0D=0A> > =
not sure what to do now.=0D=0A> >=20=0D=0A> > Balazs Scheidler <bazsi@balab=
it.hu> wrote:=0D=0A> > On Tue, 2005-04-19 at 06:42 -0700, John Thrumston wr=
ote:=0D=0A> > > I am still having trouble with this. I am working on it. On=
e=0D=0Aquestion=0D=0A> > > I have that I don't see answered anywhere (maybe=
 I am just blind).=0D=0ABut=0D=0A> > > do you have to run syslog-ng on each=
 server you want to log to the=0D=0A> > > logserver=3F Is this something I =
have to do for each of my machines=3F=0D=0AI=0D=0A> > > am not sure I compl=
etely understand the process.=0D=0A> >=20=0D=0A> > not necessarily, syslog-=
ng supports the good old UDP based syslog=0D=0A> > protocol.=0D=0A> >=20=0D=
=0A> > one minor note: if you are not that experienced you might want to=0D=
=0Astick=0D=0A> > to a stable release (currently 1.6.7) and not a BETA grad=
e software=0D=0Alike=0D=0A> > 1.9.4 is.=0D=0A> >=20=0D=0A> > --=20=0D=0A> >=
 Bazsi=0D=0A> >=20=0D=0A> >=20=0D=0A> > ___________________________________=
____________=0D=0A> > syslog-ng maillist - syslog-ng@lists.balabit.hu=0D=0A=
> > https://lists.balabit.hu/mailman/listinfo/syslog-ng=0D=0A> > Frequently=
 asked questions at=0D=0Ahttp://www.campin.net/syslog-ng/faq.html=0D=0A> > =0D=
=0A> >=20=0D=0A> > __________________________________________________=0D=0A=
> > Do You Yahoo!=3F=0D=0A> > Tired of spam=3F  Yahoo! Mail has the best sp=
am protection around=20=0D=0A> > http://mail.yahoo.com=20=0D=0A> > --0-1852=
989970-1113924522=3D:91452=0D=0A> > Content-Type: text/html; charset=3Dus-a=
scii=0D=0A> >=20=0D=0A> > <DIV>I have done just that, I have version 1.6.5 =
put when I try and=0D=0Aconfigure it, it tells me that it found libol 0.3.1=
4 and tells me</DIV>=0D=0A> > <DIV>checking libol version &gt;=3D 0.3.14...=
 configure: error:=0D=0Alibol-config not found in the specified location.</=
DIV>=0D=0A> > <DIV>So I tried the ./configure --with-libol=3D/usr/local/lib=
&nbsp;=0D=0Aand that still gave me the same result.</DIV>=0D=0A> > <DIV>&nb=
sp;</DIV>=0D=0A> > <DIV>not sure what to do now.<BR><BR><B><I>Balazs Scheid=
ler=0D=0A&lt;bazsi@balabit.hu&gt;</I></B> wrote:</DIV>=0D=0A> > <BLOCKQUOTE=
 class=3Dreplbq style=3D"PADDING-LEFT: 5px; MARGIN-LEFT: 5px;=0D=0ABORDER-L=
EFT: #1010ff 2px solid">On Tue, 2005-04-19 at 06:42 -0700, John=0D=0AThrums=
ton wrote:<BR>&gt; I am still having trouble with this. I am=0D=0Aworking o=
n it. One question<BR>&gt; I have that I don't see answered=0D=0Aanywhere (=
maybe I am just blind). But<BR>&gt; do you have to run=0D=0Asyslog-ng on ea=
ch server you want to log to the<BR>&gt; logserver=3F Is=0D=0Athis somethin=
g I have to do for each of my machines=3F I<BR>&gt; am not=0D=0Asure I comp=
letely understand the process.<BR><BR>not necessarily,=0D=0Asyslog-ng suppo=
rts the good old UDP based syslog<BR>protocol.<BR><BR>one=0D=0Aminor note: =
if you are not that experienced you might want to=0D=0Astick<BR>to a stable=
 release (currently 1.6.7) and not a BETA grade=0D=0Asoftware like<BR>1.9.4=
 is.<BR><BR>--=0D=0A<BR>Bazsi<BR><BR><BR>__________________________________=
_____________<BR>=0D=0Asyslog-ng maillist -=0D=0Asyslog-ng@lists.balabit.hu=
<BR>https://lists.balabit.hu/mailman/listinfo/=0D=0Asyslog-ng<BR>Frequently=
 asked questio=0D=0A> >  ns at=0D=0A> >=0D=0Ahttp://www.campin.net/syslog-n=
g/faq.html<BR><BR></BLOCKQUOTE><p>________=0D=0A___________________________=
_______________<br>Do You Yahoo!=3F<br>Tired of=0D=0Aspam=3F  Yahoo! Mail h=
as the best spam protection around=0D=0A<br>http://mail.yahoo.com=20=0D=0A>=
 > --0-1852989970-1113924522=3D:91452--=0D=0A> >=20=0D=0A> > --__--__--=0D=0A=
> >=20=0D=0A> > Message: 9=0D=0A> > Subject: RE: [syslog-ng]Logging Java st=
ack traces with syslog-ng and=0D=0Alog4j=0D=0A> > Date: Tue, 19 Apr 2005 09=
:05:36 -0700=0D=0A> > From: "Vaibhav Goel" <vgoel@cucbc.com>=0D=0A> > To: <=
syslog-ng@lists.balabit.hu>=0D=0A> > Reply-To: syslog-ng@lists.balabit.hu=0D=
=0A> >=20=0D=0A> >=0D=0ADQpZZXMgdGhlIHN0YWNrIHRyYWNlIGlzIG11bHRpcGxlIGxpbmV=
zLiAgV2UgYXJlIGFjdHVh=0D=0AbGx5=0D=0A> >=0D=0AIHVzaW5nIGxvZzRqIHRvIGxvZyB0a=
GUgdHJhY2VzIGxvY2FsbHkgYXMgd2VsbCBhcyBvdmVy=0D=0AIGEg=0D=0A> >=0D=0AY3VzdG9=
tIFRDUCBhcHBlbmRlciB3aGljaCBob29rcyB1cCB0byBzeXNsb2ctbmcgYW5kIHNl=0D=0AbmRz=0D=
=0A> >=0D=0AIHRoZSBsb2dzIHRvIHRoZSBsb2dob3N0LiAgVGhpcyBpcyBob3cgSSB3YXMgYWJ=
sZSB0byBm=0D=0AaW5k=0D=0A> >=0D=0AIHRoZSBwcm9ibGVtLiAgVGhlIGV4Y2VwdGlvbiBlc=
nJvciBzaG93ZWQgdXAgb24gYm90aCB0=0D=0AaGUg=0D=0A> >=0D=0AbG9jYWwgbG9nIGFzIHd=
lbGwgYXMgdGhlIHN5c2xvZy1uZyBwcm9kdWNlZCBsb2cgYnV0IHN0=0D=0AYWNr=0D=0A> >=0D=
=0AIHRyYWNlIGFmdGVyIHRoZSBlcnJvciBkaWQgbm90IHNob3cgdXAgKGFzIHlvdSBtZW50aW9u=0D=
=0AZWQg=0D=0A> >=0D=0Ac3lzbG9nLW5nIHNob3VsZCBtYXRjaCBlYWNoIGFuZCBldmVyeSBsa=
W5lKS4gIEkgZG8gaGF2=0D=0AZSBs=0D=0A> >=0D=0Ab2dzdXJmZXIgb24gdGhlIGFwcCBzZXJ=
2ZXIgaG93ZXZlciBJIGRvbuKAmXQgdGhpbmsgSSB3=0D=0Ab3Vs=0D=0A> >=0D=0AZCBrbm93I=
HRoZSBpbml0aWFsIGxpbmUgb2YgdGhlIHN0YWNrIHRyYWNlIHNpbmNlIGl0cyBh=0D=0AcmJp=0D=
=0A> >=0D=0AcnRyYXJ5IGRlcGVuZGluZyBvbiB0aGUgZXJyb3IuDQoNCkkgaGVhciB5YSBvbiB=
0aGUgU1RE=0D=0AT1VU=0D=0A> >=0D=0AIG5ld2xpbmUgaXNzdWUuICBJIHRoaW5rIEkgZGlkI=
HJ1biBpbnRvIHRoYXQgb25jZSB3aGVy=0D=0AZSBJ=0D=0A> >=0D=0AIHdhcyBmZWVkaW5nIHN=
0ZGluIGZyb20gc3lzbG9nLW5nIHRvIGEgcGVybCBzY3JpcHQuLi4N=0D=0ACg0K=0D=0A> >=0D=
=0ADQpUaGFua3MsDQoNClZhaWJoYXYgR29lbA0KLS0tLS1PcmlnaW5hbCBNZXNzYWdlLS0tLS0N=0D=
=0ACkZy=0D=0A> >=0D=0Ab206IHN5c2xvZy1uZy1hZG1pbkBsaXN0cy5iYWxhYml0Lmh1IFttY=
WlsdG86c3lzbG9nLW5n=0D=0ALWFk=0D=0A> >=0D=0AbWluQGxpc3RzLmJhbGFiaXQuaHVdIE9=
uIEJlaGFsZiBPZiBVTklYIEFkbWluDQpTZW50OiBB=0D=0AcHJp=0D=0A> >=0D=0AbCAxOCwgM=
jAwNSA5OjQ0IFBNDQpUbzogc3lzbG9nLW5nQGxpc3RzLmJhbGFiaXQuaHUNClN1=0D=0AYmpl=0D=
=0A> >=0D=0AY3Q6IFJlOiBbc3lzbG9nLW5nXUxvZ2dpbmcgSmF2YSBzdGFjayB0cmFjZXMgd2l=
0aCBzeXNs=0D=0Ab2ct=0D=0A> >=0D=0AbmcgYW5kIGxvZzRqDQoNClRoZSBqYXZhIHN0YWNrI=
HRyYWNlIGlzIG11bHRpcGxlIGxpbmVz=0D=0ALCBy=0D=0A> >=0D=0AaWdodD8gU3lzbG9nIG1=
lc3NhZ2VzIGFyZQ0Kc2luZ2xlIGxpbmVzIC0gYW5kIHNvIHN5c2xv=0D=0AZy1u=0D=0A> >=0D=
=0AZydzIGZpbHRlcnMgbWF0Y2ggb25lIGxpbmUgYXQgYSB0aW1lLg0KDQpZb3UgbmVlZCB0byBt=0D=
=0AYXRj=0D=0A> >=0D=0AaCBlYWNoIGFuZCBldmVyeSBsaW5lIG9yIGp1c3QgaGF2ZSB0aGUga=
mF2YSBhcHAgbG9nIHRv=0D=0ADQph=0D=0A> >=0D=0AIGZpbGUgYW5kIHBhcnNlIGl0LiBJZiB=
5b3UgaGF2ZSBzd2F0Y2ggb3IgbG9nc3VyZmVyIG9y=0D=0AIFNF=0D=0A> >=0D=0AQyBvcg0Kc=
29tZXRoaW5nIHRoZSB5b3UgY2FuIHByb2JhYmx5IHNlZSB0aGUgaW5pdGlhbCBs=0D=0AaW5l=0D=
=0A> >=0D=0AIG9mIHRoZSBzdGFjayB0cmFjZQ0KYW5kIGFuZCBsb29rIGZvciB0aGUgcmVzdCB=
vZiB0aGUg=0D=0AbWVz=0D=0A> >=0D=0Ac2FnZSBhbmQgc2VuZCB0aGUgd2hvbGUgdGhpbmcgd=
mlhDQplbWFpbC9zbm1wIHRyYXAvcGFn=0D=0AZXIv=0D=0A> >=0D=0AbW9uIHRyYXAvd2hhdGV=
2ZXIuDQoNCkFyZSB5b3UganVzdCBmZWVkaW5nIFNURE9VVCBvZiB0=0D=0AaGUg=0D=0A> >=0D=
=0AYXBwIHNlcnZlciBpbnRvIGxvZ2dlciBvcg0Kc29tZXRoaW5nPyBJIGhvcGUgaXQgZG9lc24n=0D=
=0AdCBz=0D=0A> >=0D=0AZW5kIG1lc3NhZ2VzIHdpdGggbmV3bGluZXMgaW4gdGhlbSBpbnRvD=
QpvcGVubG9nKCkvc3lz=0D=0AbG9n=0D=0A> >=0D=0AKCkuIEkgaGF0ZSB3aGVuIHRoYXQgaGF=
wcGVucywgYnV0IGNyYXBweSBsb2dzIGFyZQ0KYmV0=0D=0AdGVy=0D=0A> >=0D=0AIHRoYW4gb=
m8gbG9ncywgSSBhbHdheXMgc2F5LiA7KQ0KDQpPbiA0LzE4LzA1LCBWYWliaGF2=0D=0AIEdv=0D=
=0A> >=0D=0AZWwgPHZnb2VsQGN1Y2JjLmNvbT4gd3JvdGU6DQo+ICANCj4gIA0KPiANCj4gSGk=
gYWxsIA0K=0D=0APiAN=0D=0A> >=0D=0ACj4gICANCj4gDQo+IEkgYW0gdHJ5aW5nIHRvIGdld=
CBzeXNsb2ctbmcgdG8gbG9nIGEgamF2=0D=0AYSBz=0D=0A> >=0D=0AdGFjayB0cmFjZSBzdWN=
oIGFzIG9uZSBzaG93bg0KPiBiZWxvdy4gDQo+IA0KPiAgIA0KPiAN=0D=0ACj4g=0D=0A> >=0D=
=0AUFNUOjIwMDUtMDMtMTUvMTA6NDY6NDkuNjU3IFtFeGVjdXRlVGhyZWFkOiAnMjMnIGZvciBx=0D=
=0AdWV1=0D=0A> >=0D=0AZToNCj4gJ3dlYmxvZ2ljLmtlcm5lbC5EZWZhdWx0J10gTE9HRVJST=
1INCj4gandzbS5jb20u=0D=0AY3Vj=0D=0A> >=0D=0AYmMudGFnbGliLmNvbnRlbnQuSW5jbHV=
kZVRhZ0NvbnRlbnQgLS0NCj4gU2VydmxldEV4Y2Ug=0D=0ADQo+=0D=0A> >=0D=0AIA0KPiBwd=
GlvbiBvbiBpbmNsdWRlIHRhZyANCj4gDQo+IGphdmF4LnNlcnZsZXQuU2Vydmxl=0D=0AdEV4=0D=
=0A> >=0D=0AY2VwdGlvbjogR290IGVycm9yOiA0MDQgDQo+IA0KPiAgICAgICAgIGF0DQo+IGN=
vbS5jdWNi=0D=0AYy5z=0D=0A> >=0D=0AZXJ2bGV0LlNpbXBsZU1EUmVxdWVzdERpc3BhdGNoZ=
XIuaGFuZGxlRXJyb3IoU2ltcGxlTURS=0D=0AZXF1=0D=0A> >=0D=0AZXN0RGlzcGF0Y2hlci5=
qYXZhOjcyKQ0KPiANCj4gICAgICAgICBhdA0KPiBjb20uY3VjYmMu=0D=0Ac2Vy=0D=0A> >=0D=
=0AdmxldC5BYnN0cmFjdE1EUmVxdWVzdERpc3BhdGNoZXIuY2hlY2tGb3JFcnJvcihBYnN0cmFj=0D=
=0AdE1E=0D=0A> >=0D=0AUmVxdWVzdERpc3BhdGNoZXIuamF2YTo4NykNCj4gDQo+ICAgICAgI=
CAgYXQNCj4gY29tLmN1=0D=0AY2Jj=0D=0A> >=0D=0ALnNlcnZsZXQuQWJzdHJhY3RNRFJlcXV=
lc3REaXNwYXRjaGVyLmluY2x1ZGUoQWJzdHJhY3RN=0D=0ARFJl=0D=0A> >=0D=0AcXVlc3REa=
XNwYXRjaGVyLmphdmE6NzEpDQo+IA0KPiAgICAgICAgIGF0DQo+IGNvbS5jdWNi=0D=0AYy50=0D=
=0A> >=0D=0AYWdsaWIuY29udGVudC5JbmNsdWRlVGFnQ29udGVudC53cml0ZShJbmNsdWRlVGF=
nLmphdmE6=0D=0AMTM3=0D=0A> >=0D=0AKQ0KPiANCj4gICAgICAgICBhdA0KPiBjb20uY3VjY=
mMudGFnbGliLmNvbnRlbnQuQ29udGVu=0D=0AdFRh=0D=0A> >=0D=0AZ1N1cHBvcnQuZG9FbmR=
UYWcoQ29udGVudFRhZ1N1cHBvcnQuamF2YTo1MikNCj4gDQo+ICAg=0D=0AICAg=0D=0A> >=0D=
=0AICAgYXQNCj4ganNwX3NlcnZsZXQuX3BlcnNvbmFsLl9faW5kZXguX2pzcFNlcnZpY2UoaW5k=0D=
=0AZXgu=0D=0A> >=0D=0AanNwOjYzKSANCj4gDQo+ICAgICAgICAgYXQNCj4gd2VibG9naWMuc=
2VydmxldC5qc3AuSnNw=0D=0AQmFz=0D=0A> >=0D=0AZS5zZXJ2aWNlKEpzcEJhc2UuamF2YTo=
zMykgDQo+IA0KPiAgICAgICAgIGF0DQo+IHdlYmxv=0D=0AZ2lj=0D=0A> >=0D=0ALnNlcnZsZ=
XQuaW50ZXJuYWwuU2VydmxldFN0dWJJbXBsJFNlcnZsZXRJbnZvY2F0aW9uQWN0=0D=0AaW9u=0D=
=0A> >=0D=0ALnJ1bihTZXJ2bGV0U3R1YkltcGwuamF2YTo5OTYpDQo+IA0KPiAgICAgICAgIGV=
0Y+KApiAN=0D=0ACj4g=0D=0A> >=0D=0ADQo+ICAgDQo+IA0KPiBJIGhhdmUgYSBmaWx0ZXIgb=
WF0Y2ggIkxPR0VSUk9SIiBjb25maWd1=0D=0AcmVk=0D=0A> >=0D=0AIGZvciBzeXNsb2ctbmc=
uICBJdCBtYXRjaGVzIGZpbmUNCj4gYW5kIGxvZ3MgdGhlIGxpbmU6=0D=0AIA0K=0D=0A> >=0D=
=0APiANCj4gUFNUOjIwMDUtMDMtMTUvMTA6NDY6NDkuNjU3IFtFeGVjdXRlVGhyZWFkOiAnMjMn=0D=
=0AIGZv=0D=0A> >=0D=0AciBxdWV1ZToNCj4gJ3dlYmxvZ2ljLmtlcm5lbC5EZWZhdWx0J10gT=
E9HRVJST1INCj4gandz=0D=0AbS5j=0D=0A> >=0D=0Ab20uY3VjYmMudGFnbGliLmNvbnRlbnQ=
uSW5jbHVkZVRhZ0NvbnRlbnQgLS0NCj4gU2Vydmxl=0D=0AdEV4=0D=0A> >=0D=0AY2UgDQo+I=
A0KPiBwdGlvbiBvbiBpbmNsdWRlIHRhZyANCj4gDQo+ICAgDQo+IA0KPiBIb3dl=0D=0AdmVy=0D=
=0A> >=0D=0ALCB0aGUgc3RhY2sgdHJhY2UgYWZ0ZXIgdGhhdCBpcyBpZ25vcmVk4oCmLiANCj4=
gDQo+ICAg=0D=0ADQo+=0D=0A> >=0D=0AIA0KPiBBbnkgd2F5IHRvIGdldCB0aGF0PyAgSSBnd=
WVzcyBhIHJlZ2V4cCBtYXRjaCBvbiBM=0D=0AT0dF=0D=0A> >=0D=0AUlJPUiBpcyBvdXQgb2Y=
gdGhlDQo+IHF1ZXN0aW9u4oCmIA0KPiANCj4gICANCj4gDQo+IFRo=0D=0AYW5r=0D=0A> >=0D=
=0Acw0KwrMrJcKiCcOg4oSiwqjCpeKAkystwrMrJcKiCcOg4oCTKy3CscK2wqVpwrjCreKAoMOo=0D=
=0AbcK2=0D=0A> >=0D=0A4oC6P8O+WMKswrbDhsOa4oCiwqbDosK2G8K/4oSiwqjCpeKEosKpw=
7/igJMrLcWgd8Oow77D=0D=0AjMKs=0D=0A> >=0D=0A4oCTy4Yn4oKsWsOewqrDp8KnwrZcxaH=
CskfCncKqw6fCrMK2KifCscKrYcK2w5p/w78NCjBx=0D=0AwqnC=0D=0A> > qcWgecOewrfDuz=
LCslogxb4Pw59qwqhtDQoNCg=3D=3D=0D=0A> >=20=0D=0A> >=20=0D=0A> > --__--__--=0D=
=0A> >=20=0D=0A> > _______________________________________________=0D=0A> >=
 syslog-ng maillist  -  syslog-ng@lists.balabit.hu=0D=0A> > https://lists.b=
alabit.hu/mailman/listinfo/syslog-ng=0D=0A> >=20=0D=0A> >=20=0D=0A> > End o=
f syslog-ng Digest=0D=0A> > ###########################################=0D=0A=
> >=20=0D=0A> > This message has been scanned by F-Secure Anti-Virus for Mi=
crosoft=0D=0AExchange.=0D=0A> > For more information, connect to http://www=
=2Ef-secure.com/=0D=0A> >=20=0D=0A> > This message (including any attachmen=
ts and/or related materials) is=0D=0Aconfidential to, copyright by, and is =
the property of Nikken UK Limited,=0D=0Aunless otherwise noted. If you are =
not the intended recipient, you=0D=0Ashould delete this message and are her=
eby notified that any disclosure,=0D=0Acopying, or distribution of this mes=
sage, or the taking of any action=0D=0Abased on it, is strictly prohibited.=0D=
=0A> >=20=0D=0A> > _______________________________________________=0D=0A> >=
 syslog-ng maillist  -  syslog-ng@lists.balabit.hu=0D=0A> > https://lists.b=
alabit.hu/mailman/listinfo/syslog-ng=0D=0A> > Frequently asked questions at=0D=
=0Ahttp://www.campin.net/syslog-ng/faq.html=0D=0A> ________________________=
_______________________=0D=0A> syslog-ng maillist  -  syslog-ng@lists.balab=
it.hu=0D=0A> https://lists.balabit.hu/mailman/listinfo/syslog-ng=0D=0A> Fre=
quently asked questions at http://www.campin.net/syslog-ng/faq.html=0D=0A__=
_____________________________________________=0D=0Asyslog-ng maillist  -  s=
yslog-ng@lists.balabit.hu=0D=0Ahttps://lists.balabit.hu/mailman/listinfo/sy=
slog-ng=0D=0AFrequently asked questions at http://www.campin.net/syslog-ng/=
faq.html=0D=0A=0D=0A=0D=0A=0D=0A<p class=3DMsoNormal><span style=3D'font-si=
ze:8.5pt'>This e-mail contains Omaha Public Power District's confidential a=
nd proprietary information and is for use only by the intended recipient.  =
Unless explicitly stated otherwise, this e-mail is not a contract offer, am=
endment, nor acceptance.  If you are not the intended recipient you are not=
ified that disclosing, copying, distributing or taking any action in relian=
ce on the contents of this information is strictly prohibited.</p>=0D=0A=0D=
=0A