[syslog-ng]Cisco Pix configuration

[Madziarczyk, Jonathan]

I believe you also need a log statement similar to below in your
syslog-ng.conf:

log{source(network);filter(f_pix);destination(pixlog);};


Also, your pix should have the following commands:
logging on
logging facility 4
logging trap {level...i.e. informational, debugging, etc}
logging host inside {IP address of logging server}


Hope this helps,
Jon



-----Original Message-----
From: syslog-ng-admin@lists.balabit.hu
[mailto:syslog-ng-admin@lists.balabit.hu] On Behalf Of Ben Whittaker
Sent: Wednesday, June 09, 2004 1:58 PM
To: syslog-ng@lists.balabit.hu
Subject: [syslog-ng]Cisco Pix configuration

How do I setup syslog-ng for cisco pix.

I have added the following lines to my config

# PIX
source network { udp () ; tcp (); };

destination pixlog { file("/var/log/pix.log"); };

filter f_pix { facility(local4); };



but I am not getting any logging to this new syslog server.


=09
	=09
__________________________________
Do you Yahoo!?
Friends.  Fun.  Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/=20
_______________________________________________
syslog-ng maillist  -  syslog-ng@lists.balabit.hu
https://lists.balabit.hu/mailman/listinfo/syslog-ng
Frequently asked questions at http://www.campin.net/syslog-ng/faq.html