Dear Nocolas,

Please see the router status…….

Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version

12.3(14)T

4, RELEASE SOFTWARE (fc2)

ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)

 

It’s also mention that another one my proxy is running with WCCP same router configuration.

But currently my project is tproxy configuration with WCCP, it’s has not running ok.

My question is TPROXY + WCCP anything misconfigured ????

 

Thanks

Engr.M.Monzur Alam

Network & System Admin

Grameen CyberNet Ltd.

Dhaka, Bnagladesh

 

-----Original Message-----
From: Ritter, Nicholas [mailto:Nicholas.Ritter@americantv.com]
Sent:
Tuesday, May 12, 2009 10:33 PM
To: Engr.M.monzur Alam
Cc: tproxy@lists.balabit.hu
Subject: RE: [tproxy] Tproxy with WCCP configure error

 

Which cisco device is going the WCCP?

 


From: tproxy-bounces@lists.balabit.hu [mailto:tproxy-bounces@lists.balabit.hu] On Behalf Of Engr.M.monzur Alam
Sent:
Tuesday, May 12, 2009 9:43 AM
To: tproxy@lists.balabit.hu
Cc: tproxy-request@lists.balabit.hu
Subject: [tproxy] Tproxy with WCCP configure error

 

I successfully configure tproxy all the steps. (Patching Centos, Patching iptables, Building squid). And also WCCP configuration with L4 WCCPv2. When I trying check gre0 tunnel with any packet flow but don’t found any request.

My error showed………………………………….
[root@heldas]# tcpdump -i gre0
tcpdump: WARNING: arptype 778 not supported by libpcap - falling back to cooked socket
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on gre0, link-type LINUX_SLL (Linux cooked), capture size 96 bytes
^C
0 packets captured
0 packets received by filter
0 packets dropped by kernel

My iptables script is……………………………

#/bin/bash
/sbin/iptables -t mangle -N DIVERT
/sbin/iptables -t mangle -A PREROUTING -p tcp -m socket -j DIVERT
/sbin/iptables -t mangle -A DIVERT -j MARK --set-mark 1
/sbin/iptables -t mangle -A DIVERT -j ACCEPT
/sbin/iptables -t mangle -A PREROUTING -p tcp --dport 80 -j TPROXY --tproxy-mark 0x1/0x1 --on-port 3129

My Physical connectivity structure is ……..
Internet cloud to Cisco core router to Juniper firewall to Distributed Cisco router to Core Cisco switch to TPROXY 

Please give me a solution …

Thanks
Engr.Mohammad Monzur Alam
Network & System Admin
Grameen CyberNet Ltd.
Dhaka, Bangladesh