Hi,

I have changed the syslog-ngd to syslog-ng

I am getting following error while compiling syslog-ng .  

My tool chain is perfectly fine. I have complied many other packages which are fine. With syslog-ng I am getting following error.

Could you please guide me on this. It would be great if you can give me some guidelines on how to compile  syslog-ng on armv7 arch on  linux platform

  CC     lib/lib_libsyslog_ng_la-mainloop-call.lo

/tmp/ccChQOWy.s: Assembler messages:

/tmp/ccChQOWy.s:260: Error: invalid operands (.text and *UND* sections) for `-'

/tmp/ccChQOWy.s:269: Error: invalid operands (.text and *UND* sections) for `-'

make[4]: *** [lib/lib_libsyslog_ng_la-mainloop-call.lo] Error 1

make[3]: *** [all-recursive] Error 1

make[2]: *** [all] Error 2

make[2]: Leaving directory `/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-gg/engr/sw/tps/objs/46/7.X.X.R01/armv7/syslog-ng'

make[2]: Entering directory `/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-gg/engr/sw/tps/objs/46/7.X.X.R01/armv7/syslog-ng'

make --no-print-directory install-recursive

  CC     lib/lib_libsyslog_ng_la-mainloop-call.lo

/tmp/cc0N5KS5.s: Assembler messages:

/tmp/cc0N5KS5.s:260: Error: invalid operands (.text and *UND* sections) for `-'

/tmp/cc0N5KS5.s:269: Error: invalid operands (.text and *UND* sections) for `-'

make[4]: *** [lib/lib_libsyslog_ng_la-mainloop-call.lo] Error 1

make[3]: *** [install-recursive] Error 1

make[2]: *** [install] Error 2

make[2]: Leaving directory `/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-gg/engr/sw/tps/objs/46/7.X.X.R01/armv7/syslog-ng'

make[1]: *** [/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-gg/engr/sw/tps/built/46/7.X.X.R01/armv7/sbin/syslog-ng] Error 2

make[1]: Leaving directory `/home/gkuma020/PERFORCE/7.X.X.R01-gkuma020-gg/engr/sw/tps'

make: *** [tps-build] Error 2

+ set +x

Regards,

Girish

From: syslog-ng-bounces@lists.balabit.hu [mailto:syslog-ng-bounces@lists.balabit.hu] On Behalf Of Scheidler, Balázs
Sent: Sunday, February 07, 2016 2:30 AM
To: Syslog-ng users' and developers' mailing list
Subject: Re: [syslog-ng] compiling syslog-ng for armv7 platform on linux with TLS support

Sorry but I don't know the target environment so reviewing this is pretty impossible. If it compiles with these and at least the functest runs then it should be OK.

Do you have a specific reason to call syslog-ng binary as syslog-ngd? On other platforms it is syslog-ng.

On Feb 4, 2016 12:31 PM, "Girish Kumar" <girish.kumar@al-enterprise.com> wrote:

Hi All,

Presently I am compiling for armv7 platform on linux. Please let me know  whether following settings are fine

syslog-ng_deps = $(shell find $(LTOP)/syslog-ng-3.6.4 -type f)

$(OBJS)/syslog-ng/syslog-ng.configured: $(syslog-ng_deps) $(RAMDISK_LIB)/libssl.so.1.0.0 eventlog

    @rm -rf $(OBJS)/syslog-ng;

    @mkdir -p $(OBJS)/syslog-ng;

    @cd $(OBJS)/syslog-ng;\

    declare -x PATH=$(CCPATH):$(PATH);\

    declare -x CFLAGS="$(PLATFORM_CFLAGS) -I$(CROSSINCS) -I$(BUILT_INCLUDES)";\

    declare -x CPPFLAGS="$(PLATFORM_CPPFLAGS) -I$(CROSSINCS) -I$(BUILT_INCLUDES)";\

    declare -x LDFLAGS="$(PLATFORM_LDFLAGS) -L$(CROSSLIBS) -L$(BUILT_LIBS) -lcrypto -levtlog";\

    declare -x EVTLOG_CFLAGS="$(PLATFORM_CFLAGS) -I$(CROSSINCS) -I$(BUILT_INCLUDES) -I$(BUILT_INCLUDES)/eventlog";\

    declare -x EVTLOG_LIBS="$(PLATFORM_LDFLAGS) -L$(CROSSLIBS) -L$(BUILT_LIBS) -levtlog";\

    declare -x ac_cv_func_malloc_0_nonnull="yes";\

    declare -x ac_cv_func_realloc_0_nonnull="yes";\

    $(LTOP)/syslog-ng-3.6.4/configure --prefix=/ --host=$(CCPREFIX)\

        --enable-ssl --enable-glib &> $(OBJS)/syslog-ng/configure.out

    @touch $(OBJS)/syslog-ng/syslog-ng.configured

$(BUILT_BASE)/sbin/syslog-ngd: $(OBJS)/syslog-ng/syslog-ng.configured

    @cd $(OBJS)/syslog-ng;\

    declare -x PATH=$(CCPATH):$(PATH);\

    declare -x CFLAGS="$(PLATFORM_CFLAGS) -I$(CROSSINCS) -I$(BUILT_INCLUDES)";\

    declare -x CPPFLAGS="$(PLATFORM_CPPFLAGS) -I$(CROSSINCS) -I$(BUILT_INCLUDES)";\

    declare -x LDFLAGS="$(PLATFORM_LDFLAGS) -L$(CROSSLIBS) -L$(BUILT_LIBS) -lcrypto -levtlog";\

    declare -x EVTLOG_CFLAGS="$(PLATFORM_CFLAGS) -I$(CROSSINCS) -I$(BUILT_INCLUDES) -I$(BUILT_INCLUDES)/eventlog";\

    declare -x EVTLOG_LIBS="$(PLATFORM_LDFLAGS) -L$(CROSSLIBS) -L$(BUILT_LIBS) -levtlog";\

    $(MAKE) &> $(OBJS)/syslog-ng/make.out;\

    make install prefix=$(BUILT_BASE) &> $(OBJS)/syslog-ng/install.out

$(RAMDISK_SBIN)/syslog-ngd: $(BUILT_BASE)/sbin/syslog-ngd

    @cp -rf $(BUILT_BASE)/lib/syslog-ng $(RAMDISK_LIB)

   @cp -f $(BUILT_BASE)/sbin/syslog-ngd $(RAMDISK_SBIN)

    @echo "$(PLATFORM_DIR) syslog-ngd done"

syslog-ng: $(RAMDISK_SBIN)/syslog-ngd

Regards,

Girish

______________________________________________________________________________
Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
Documentation: http://www.balabit.com/support/documentation/?product=syslog-ng
FAQ: http://www.balabit.com/wiki/syslog-ng-faq