Hi, Dukes. Thanks for your reply.

At this moment, I must to turn back to log into the .log files, at the same way of the beginning. This is urgent for now. (Below is my syslog-ng.conf file)

Next, my boss is asking me to test the Syslog plugin for Cacti.

Finally, if this solution doesn't solve our demand, I will consider to re-install and test the Logzilla.

---------------------
#
# Configuration file for syslog-ng under Debian
#
# attempts at reproducing default syslog behavior

# the standard syslog levels are (in descending order of priority):
# emerg alert crit err warning notice info debug
# the aliases "error", "panic", and "warn" are deprecated
# the "none" priority found in the original syslogd configuration is
# only used in internal messages created by syslogd


######
# options

options {
        # disable the chained hostname format in logs
        # (default is enabled)
        chain_hostnames(0);

        # the time to wait before a died connection is re-established
        # (default is 60)
        time_reopen(10);

        # the time to wait before an idle destination file is closed
        # (default is 60)
        time_reap(360);

        # the number of lines buffered before written to file
        # you might want to increase this if your disk isn't catching with
        # all the log messages you get or if you want less disk activity
        # (say on a laptop)
        # (default is 0)
        #sync(0);

        # the number of lines fitting in the output queue
        log_fifo_size(2048);

        # enable or disable directory creation for destination files
        create_dirs(yes);

        # default owner, group, and permissions for log files
        # (defaults are 0, 0, 0600)
        #owner(root);
        group(adm);
        perm(0640);

        # default owner, group, and permissions for created directories
        # (defaults are 0, 0, 0700)
        #dir_owner(root);
        #dir_group(root);
        dir_perm(0755);

        # enable or disable DNS usage
        # syslog-ng blocks on DNS queries, so enabling DNS may lead to
        # a Denial of Service attack
        # (default is yes)
        use_dns(yes);

        # maximum length of message in bytes
        # this is only limited by the program listening on the /dev/log Unix
        # socket, glibc can handle arbitrary length log messages, but -- for
        # example -- syslogd accepts only 1024 bytes
        # (default is 2048)
        #log_msg_size(2048);

    #Disable statistic log messages.
    stats_freq(0);

    # Some program send log messages through a private implementation.
    # and sometimes that implementation is bad. If this happen syslog-ng
    # may recognise the program name as hostname. Whit this option
    # we tell the syslog-ng that if a hostname match this regexp than that
    # is not a real hostname.
    bad_hostname("^gconfd$");
};


######
# sources

# all known message sources
source s_all {
        # message generated by Syslog-NG
        internal();
        # standard Linux log source (this is the default place for the syslog()
        # function to send logs to)
        unix-stream("/dev/log");
        # messages from the kernel
        file("/proc/kmsg" log_prefix("kernel: "));
        # use the following line if you want to receive remote UDP logging messages
        # (this is equivalent to the "-r" syslogd flag)
        udp();
};

source net {
        unix-stream("/dev/log");
    internal();
        udp(ip(0.0.0.0) port(514));
};



######
# destinations

# some standard log files
destination df_auth { file("/var/log/auth.log"); };
destination df_syslog { file("/var/log/syslog"); };
destination df_cron { file("/var/log/cron.log"); };
destination df_daemon { file("/var/log/daemon.log"); };
destination df_kern { file("/var/log/kern.log"); };
destination df_lpr { file("/var/log/lpr.log"); };
destination df_mail { file("/var/log/mail.log"); };
destination df_user { file("/var/log/user.log"); };
destination df_uucp { file("/var/log/uucp.log"); };

# these files are meant for the mail system log files
# and provide re-usable destinations for {mail,cron,...}.info,
# {mail,cron,...}.notice, etc.
destination df_facility_dot_info { file("/var/log/$FACILITY.info"); };
destination df_facility_dot_notice { file("/var/log/$FACILITY.notice"); };
destination df_facility_dot_warn { file("/var/log/$FACILITY.warn"); };
destination df_facility_dot_err { file("/var/log/$FACILITY.err"); };
destination df_facility_dot_crit { file("/var/log/$FACILITY.crit"); };

# these files are meant for the news system, and are kept separated
# because they should be owned by "news" instead of "root"
destination df_news_dot_notice { file("/var/log/news/news.notice" owner("news")); };
destination df_news_dot_err { file("/var/log/news/news.err" owner("news")); };
destination df_news_dot_crit { file("/var/log/news/news.crit" owner("news")); };

# some more classical and useful files found in standard syslog configurations
destination df_debug { file("/var/log/debug"); };
destination df_messages { file("/var/log/messages"); };

# pipes
# a console to view log messages under X
destination dp_xconsole { pipe("/dev/xconsole"); };

# consoles
# this will send messages to everyone logged in
destination du_all { usertty("*"); };

destination Cisco7206 {
file("/var/log/routers/cisco7206.log" create_dirs(yes) );
};

destination Metrosampa-USP_CCE {
file("/var/log/routers/uspcce.log" create_dirs(yes) );
};


######
# filters

# all messages from the auth and authpriv facilities
filter f_auth { facility(auth, authpriv); };

# all messages except from the auth and authpriv facilities
filter f_syslog { not facility(auth, authpriv); };

# respectively: messages from the cron, daemon, kern, lpr, mail, news, user,
# and uucp facilities
filter f_cron { facility(cron); };
filter f_daemon { facility(daemon); };
filter f_kern { facility(kern); };
filter f_lpr { facility(lpr); };
filter f_mail { facility(mail); };
filter f_news { facility(news); };
filter f_user { facility(user); };
filter f_uucp { facility(uucp); };

# some filters to select messages of priority greater or equal to info, warn,
# and err
# (equivalents of syslogd's *.info, *.warn, and *.err)
filter f_at_least_info { level(info..emerg); };
filter f_at_least_notice { level(notice..emerg); };
filter f_at_least_warn { level(warn..emerg); };
filter f_at_least_err { level(err..emerg); };
filter f_at_least_crit { level(crit..emerg); };

# all messages of priority debug not coming from the auth, authpriv, news, and
# mail facilities
filter f_debug { level(debug) and not facility(auth, authpriv, news, mail); };

# all messages of info, notice, or warn priority not coming form the auth,
# authpriv, cron, daemon, mail, and news facilities
filter f_messages {
        level(info,notice,warn)
            and not facility(auth,authpriv,cron,daemon,mail,news);
};

# messages with priority emerg
filter f_emerg { level(emerg); };

# complex filter for messages usually sent to the xconsole
filter f_xconsole {
    facility(daemon,mail)
        or level(debug,info,notice,warn)
        or (facility(news)
                and level(crit,err,notice));
};

filter Cisco7206 {
host("10.0.0.2");
};

filter Metrosampa-USP_CCE {
host("10.0.0.3");
};

######
# logs
# order matters if you use "flags(final);" to mark the end of processing in a
# "log" statement

# these rules provide the same behavior as the commented original syslogd rules

# auth,authpriv.*                 /var/log/auth.log
log {
        source(s_all);
        filter(f_auth);
        destination(df_auth);
};

# *.*;auth,authpriv.none          -/var/log/syslog
log {
        source(s_all);
        filter(f_syslog);
        destination(df_syslog);
};

# this is commented out in the default syslog.conf
# cron.*                         /var/log/cron.log
#log {
#        source(s_all);
#        filter(f_cron);
#        destination(df_cron);
#};

# daemon.*                        -/var/log/daemon.log
log {
        source(s_all);
        filter(f_daemon);
        destination(df_daemon);
};

# kern.*                          -/var/log/kern.log
log {
        source(s_all);
        filter(f_kern);
        destination(df_kern);
};

# lpr.*                           -/var/log/lpr.log
log {
        source(s_all);
        filter(f_lpr);
        destination(df_lpr);
};

# mail.*                          -/var/log/mail.log
log {
        source(s_all);
        filter(f_mail);
        destination(df_mail);
};

# user.*                          -/var/log/user.log
log {
        source(s_all);
        filter(f_user);
        destination(df_user);
};

# uucp.*                          /var/log/uucp.log
log {
        source(s_all);
        filter(f_uucp);
        destination(df_uucp);
};

# mail.info                       -/var/log/mail.info
log {
        source(s_all);
        filter(f_mail);
        filter(f_at_least_info);
        destination(df_facility_dot_info);
};

# mail.warn                       -/var/log/mail.warn
log {
        source(s_all);
        filter(f_mail);
        filter(f_at_least_warn);
        destination(df_facility_dot_warn);
};

# mail.err                        /var/log/mail.err
log {
        source(s_all);
        filter(f_mail);
        filter(f_at_least_err);
        destination(df_facility_dot_err);
};

# news.crit                       /var/log/news/news.crit
log {
        source(s_all);
        filter(f_news);
        filter(f_at_least_crit);
        destination(df_news_dot_crit);
};

# news.err                        /var/log/news/news.err
log {
        source(s_all);
        filter(f_news);
        filter(f_at_least_err);
        destination(df_news_dot_err);
};

# news.notice                     /var/log/news/news.notice
log {
        source(s_all);
        filter(f_news);
        filter(f_at_least_notice);
        destination(df_news_dot_notice);
};


# *.=debug;\
#         auth,authpriv.none;\
#         news.none;mail.none     -/var/log/debug
log {
        source(s_all);
        filter(f_debug);
        destination(df_debug);
};


# *.=info;*.=notice;*.=warn;\
#         auth,authpriv.none;\
#         cron,daemon.none;\
#         mail,news.none          -/var/log/messages
log {
        source(s_all);
        filter(f_messages);
        destination(df_messages);
};

# *.emerg                         *
log {
        source(s_all);
        filter(f_emerg);
        destination(du_all);
};


# daemon.*;mail.*;\
#         news.crit;news.err;news.notice;\
#         *.=debug;*.=info;\
#         *.=notice;*.=warn       |/dev/xconsole
log {
        source(s_all);
        filter(f_xconsole);
        destination(dp_xconsole);
};

log {
source(net);
filter(Cisco7206);
destination(Cisco7206);
};

log {
source(net);
filter(Metrosampa-USP_CCE);
destination(Metrosampa-USP_CCE);
};
---------------------------------
-- 

Wagner Pereira

PoP-SP/RNP - Ponto de Presença da RNP em São Paulo
CCE/USP - Centro de Computação Eletrônica da Universidade de São Paulo
http://www.pop-sp.rnp.br
Tel. (11) 3091-8901

Em 7/5/2010 10:19, Clayton Dukes escreveu:
Hi Wagner,
If you need help with LogZilla, please let me know.
For syslog-ng, it would help if you posted your syslog-ng.conf file.


On Fri, May 7, 2010 at 9:08 AM, Wagner Pereira <wpereira@pop-sp.rnp.br> wrote:
Hi, all.

When I installed Syslog-ng, I configured it to log all the device's
activities into the .log files. It worked well for some weeks.

In the last week, I tried to use Logzilla ( former PhP-Syslog-ng) but I
can't successful, then I removed Logzilla yesterday.

After I removed Logzilla, I noticed that all the activities are been
recorded into the /var/log/messages file and no longer into the .log
files I've created for this purpose, originally.

What should I configure to turn logging in those .log files? I already
have the syslog-ng.conf configured properly.

Thanks in advance.

--

Wagner Pereira

PoP-SP/RNP - Ponto de Presença da RNP em São Paulo
CCE/USP - Centro de Computação Eletrônica da Universidade de São Paulo
http://www.pop-sp.rnp.br
Tel. (11) 3091-8901

______________________________________________________________________________
Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
Documentation: http://www.balabit.com/support/documentation/?product=syslog-ng
FAQ: http://www.campin.net/syslog-ng/faq.html




--
______________________________________________________________

Clayton Dukes
______________________________________________________________

______________________________________________________________________________
Member info: https://lists.balabit.hu/mailman/listinfo/syslog-ng
Documentation: http://www.balabit.com/support/documentation/?product=syslog-ng
FAQ: http://www.campin.net/syslog-ng/faq.html