From pks@chollian.net Tue, 11 Feb 2003 19:43:48 +0900 Date: Tue, 11 Feb 2003 19:43:48 +0900 From: =?ks_c_5601-1987?B?ODk0uenIrcGh?= pks@chollian.net Subject: [zorp] =?ks_c_5601-1987?B?KLGksO0pICDAzL/0u+e2+73Hw7UgU1cgwaaw+A==?= "894백화점

서로 도우며 나눔을 같이하는 진실한 이웃을 위하여 무료 제공합니다.

894백화점  회원가입 하시면 무료로 사용합니다.

백화점 오시는 길

WWW.894PC.COM

이 메일은 상업적 광고가 아닙니다.

개발자의 33년동안 축적된 다각적인 사회경험과 일상 생활에서 터득한 편리하고 유익한 SW를 개발하여 이웃을 사랑하는 마음으로 무료 제공하는 것입니다.
아래의 정보관리/회계관리 SW는 한국소프트진흥원에 정식 등록된 제품으로 10여년에 걸쳐 개발된 우수한 프로그램입니다.
급변하는 정보화 세상에서 귀하의 품위를 한단계 Upgrade할 수 있는 좋은 기회가 될 것입니다. 부자 되십시오!!

 정보관리/회계관리/중개관리/선물옵션

 

무료제공 SW( 한시적)

 

결혼을 준비하는 선남선녀에게

회원관리를 위한 안내장 발송자에게

집안의 대소사를 알리려는 모든이에게

동창(동문)들의 모임 안내장 발송자에게

신도관리를 위한 각종 안내장 발송자에게

기타 우편발송을 편리하게 하고자하는 모든이에게

봉  투. 라  벨   자 동 인 쇄 !

아래의 용도로 사용하면 더욱 편리합니다.

고객관리!!

                    회원관리!!

                                      DM마케팅!!

                                                           정보관리 SW로 ...

정보관리 SW는
개인의 유용한 정보를 체계적으로 정비. 분류. 저장하고 필요시 즉시 활용할 수 있는 획기적인 "개인정보관리" 프로그램입니다. 인터넷으로 연결되는 다양한 정보화 사회에서 상대방의 정보를 수집. 분류하여 보관. 관리하고, 이와 같은 정보를 적절히 이용할 수 있는 능력에 따라 인간관계 개선이나 사업의 경쟁적 우위확보를 위한 결정적인 성공의 지름길이될 수도 있을 것입니다.

정보관리 SW는
개인의 전화번호나 주소와 같은 기초적인 자료를 비롯하여 경조사 및 그 비용계산에 이르는 여러 가지 개인정보를 종합적으로 관리할 수  있는 유익한 프로그램으로서 현대 정보화 사회에서 DM 마케팅의 중요성을 만족시킬 수 있는 획기적인 SW입니다.

정보관리 SW는
봉투. 라벨 자동인쇄와 발신자 정보의 다양한 표현, 수신서식을 활용한 적절한 상대호칭, 음력생일을 양력으로 자동변환, 사진삽입, 우편번호 자동찾기, 세련되고 품위있는 출력서식등 다른 SW에서 개발하지 못한 창조적인 프로그램입니다.

 

1. 정보관리 SW의 주요기능

  (1) 관리대상의 다음 정보를 Database화 한다.
      성명 : 한글, 한자,영어
      자택 : 전화번호,휴대폰,생일,인터넷,이매일,Fax,주소,취미,종교
               학력,주민등록번호
      직장 : 회사,부서,직위,전화번호,인터넷,이메일,Fax,주소
      경조 : 수입경조사,지출경조사
  (2) Database로 저장된 정보를 분류. 편집한다.
  (3) 원하는 서식으로 출력한다.
  (4) 봉투.라벨을 자동 인쇄한다.
  (5) 경조사 봉투를  자동 작성한다.
  (6) 우편번호를 자동 검색한다.
  (7) 경조사를 자동 관리한다.
  (8) 음력생일을 양력으로 자동 변환한다.
  (9) 다양한 수신자 호칭을 선택할 수 있다.
  (10)적절한 발신자 정보를 표현할 수 있다.

2. 정보관리 SW가 필요한 곳

  (1) 각종 경조사 안내문 발송
  (2) 동문.단체. 모임등의 회원관리
  (3) 각종 선거의 유권자 관리
  (4) 영업활동의 고객관리
  (5) 개인 및 단체의 주소관리
  (6) 종교단체의 신도관리
  (7) 기타 개인정보관리가 필요한 곳

3. 정보관리 SW의 Download

    아래의 홈페이지에서 다운 받으십시오.
    클릭하면 됩니다.

      http://www.894pc.com
     회원가입 하면 무료사용 
     (전화 : 050-2627-2627)

     P2CMART 894백화점

    경기도 구리시 인창동 651-27

무료 제공되는 SW의 Download는 시스템구조와 홈페이지 운영 등의 사정으로  894백화점 상단에 경영도우미 항목으로 표시되어 있습니다.

귀하의 이메일주소는 인터넷 [서핑중] 알게되었으며, 메일주소 이외의 어떠한 정보도 가지고 있지 않습니다. 메일수신을 원하지 않을경우 [수신거부]를 눌러 주십시오.. 감사 합니다. If you feel that this information is not what you want,  please click [HERE] requesting to be removed. Thank you, and we apologize for any inconvenience.

운영자 : 894백화점     전화번호 : 0502-894-0502     Email: pks5@chol.com
From ivan_n_lopez@hotmail.com Tue, 18 Feb 2003 20:34:23 -0300 Date: Tue, 18 Feb 2003 20:34:23 -0300 From: Ivan Lopez ivan_n_lopez@hotmail.com Subject: [zorp] Zorp GPL-VERSION Hello: Congratulations for your product. First: Pardon for my English. I'm a beginner (in English, Zorp and Python) Second: I`ve intalled zorp 2.0.1 (GPL-VERSION!!!)in my linux box. I want to configure zorp as Reverse Proxy (is this posible with this version?). If it is, I큟 having problems with my installation/configuration. Below are instances.conf and policy-http.py files: Instances.conf (grep -v ^.*# /etc/zorp/instances.conf) -------------- Zhttp --verbose=10 --policy /etc/zorp/policy-http.py policy-http.py (grep -v ^.*# /etc/zorp/policy-http.py) -------------- from Zorp.Zorp import * from Zorp import Zorp from Zorp.Zone import InetZone from Zorp.Service import Service from Zorp.SockAddr import SockAddrInet from Zorp.Chainer import DirectedChainer from Zorp import Http from Zorp.Http import HttpProxy from Zorp.Listener import Listener Zorp.firewall_name = 'zorp@bcpc' InetZone("cpc", "192.168.1.0/24", outbound_services=[], inbound_services=["INhttp"]), InetZone("local", "127.0.0.0/8", inbound_services=["*"], outbound_services=[]), InetZone("internet", "0.0.0.0/0", inbound_services=[], outbound_services=["INhttp"]) class INhttp(HttpProxy): def config(self): HttpProxy.config(self) self.transparent_mode = 0 def init(Zhttp): Service("INhttp", DirectedChainer(SockAddrInet("192.168.1.100", 80)),\ INhttp) Listener(SockAddrInet("aaa.bb.cc.ddd", 80), "INhttp") When zorp starts I obtain (tail -f syslog): -------------------------- Feb 18 19:38:47 bcpc Zhttp[6578]: (noname/nosession): Verbosity level: 100 Feb 18 19:38:47 bcpc Zhttp[18175]: (Log thread): thread starting; Feb 18 19:38:47 bcpc Zhttp[6578]: (noname/nosession): System dependant init; sysdep_tproxy='1' Feb 18 19:38:47 bcpc Zhttp[6578]: (noname/nosession): Changing process capabilities; caps='= cap_net_bind_service+ep cap_net_admin+p' Feb 18 19:38:47 bcpc Zhttp[6578]: (noname/nosession): Changing process capabilities; caps='= cap_net_bind_service,cap_net_admin+ep' Feb 18 19:38:47 bcpc Zhttp[6578]: (noname/nosession): bind() failed; error='No such file or directory' Feb 18 19:38:47 bcpc Zhttp[6578]: (noname/nosession): Resetting process capabilities; caps='= cap_net_bind_service,cap_net_admin+p' Feb 18 19:38:47 bcpc Zhttp[31782]: (conntrack/thread): thread starting; Feb 18 19:38:48 bcpc Zhttp[6578]: zorp version 2.0.0 starting up Feb 18 19:38:48 bcpc Zhttp[18175]: (Log thread): Policy bootstrapping... Feb 18 19:38:48 bcpc Zhttp[18175]: (Log thread): Traceback (most recent call last): Feb 18 19:38:48 bcpc Zhttp[18175]: (Log thread): File "/etc/zorp/policy-http.py", line 24, in ? Feb 18 19:38:48 bcpc Zhttp[6578]: (noname/nosession): Error loading initial policy, exiting; Feb 18 19:38:48 bcpc Zhttp[6578]: zorp version 2.0.0 going down. Feb 18 19:38:48 bcpc Zhttp[18175]: (Log thread): from Zorp.Chainer import DirectedChainer Feb 18 19:38:48 bcpc Zhttp[18175]: (Log thread): ImportError: cannot import name DirectedChainer Feb 18 19:38:48 bcpc Zhttp[31782]: (conntrack/thread): thread exiting; I don't know why bind() fails and I don't know why DirectedChainer is not in /usr/share/zorp/pylib/Zorp/Chainer.py. Here is the output for (grep .*class in this file): class AbstractChainer: class ConnectChainer(AbstractChainer): class FailoverChainer(ConnectChainer): class SideStackChainer(AbstractChainer): My environment is: Debian 3.0.0 r0 (woody) python 2.1.3-3 python-extclass 1.2-5 Zorp 2.0.0-1 Zorp-modules 2.0.0-1 libzorpll 2.0.18.4-1 libglib2 2.0.6-1 NOTE: When I install zorp I run: dpkg -i --ignore-depends=libzorpll zorp_2.0-1_i386.deb because zorp depends from libzorpll and libzorpll depends from zorp. Is this cycle OK or I've misintalled zorp? I can't find the error in my installation/configuration. Can you help me? Best Regards. Ivan Lopez Santa Fe - Argentina _________________________________________________________________ Charla con tus amigos en l�nea mediante MSN Messenger: http://messenger.yupimsn.com/ From bazsi@balabit.hu Wed, 19 Feb 2003 09:58:42 +0100 Date: Wed, 19 Feb 2003 09:58:42 +0100 From: Balazs Scheidler bazsi@balabit.hu Subject: [zorp] Zorp GPL-VERSION On Tue, Feb 18, 2003 at 08:34:23PM -0300, Ivan Lopez wrote: > Hello: > Congratulations for your product. > First: Pardon for my English. I'm a beginner (in English, Zorp and Python) No need to worry about your English, we are not native English speakers either. Although a bit of understanding in Python does not hurt, but is not absolutely necessary. The most important is to take care about indentation. When a block is started (either if, def, or class statement) the enclosed block _must_ be indented consistently. E.g. def Zhttp(): # this must be indented by the same amount # as this line # increasing indent without the start of a block is # forbidden pass > Second: I`ve intalled zorp 2.0.1 (GPL-VERSION!!!)in my linux box. I want to > configure zorp as Reverse Proxy (is this posible with this version?). If it > is, I큟 having problems with my installation/configuration. Yes, reverse proxy configuration is certainly possible. > Below are instances.conf and policy-http.py files: > Instances.conf (grep -v ^.*# /etc/zorp/instances.conf) > -------------- > Zhttp --verbose=10 --policy /etc/zorp/policy-http.py > > policy-http.py (grep -v ^.*# /etc/zorp/policy-http.py) > -------------- As I see the example you are using as your policy file is a bit outdated (it seems to be a policy for Zorp 0.6) I include my fixes in your policy file below. > > > from Zorp.Zorp import * > from Zorp import Zorp > from Zorp.Zone import InetZone > from Zorp.Service import Service > from Zorp.SockAddr import SockAddrInet > from Zorp.Chainer import DirectedChainer > from Zorp import Http > from Zorp.Http import HttpProxy > from Zorp.Listener import Listener # Zorp.Core imports all required symbols from Zorp.Core import * # this one imports Http proxy from Zorp.Http import * > > Zorp.firewall_name = 'zorp@bcpc' > > InetZone("cpc", "192.168.1.0/24", > outbound_services=[], > > inbound_services=["INhttp"]), no comma is permitted after the Zone definition. > > InetZone("local", "127.0.0.0/8", > inbound_services=["*"], > outbound_services=[]), comma is not allowed here either > > InetZone("internet", "0.0.0.0/0", > inbound_services=[], > outbound_services=["INhttp"]) > > > class INhttp(HttpProxy): > def config(self): > HttpProxy.config(self) > self.transparent_mode = 0 > def init(Zhttp): > > Service("INhttp", DirectedChainer(SockAddrInet("192.168.1.100", > 80)),\ > INhttp) > Listener(SockAddrInet("aaa.bb.cc.ddd", 80), "INhttp") Here you made a mistake in your indentation. the correct function definition is: def Zhttp(): Service("INhttp", INhttp, router=DirectedRouter(SockAddrInet('192.168.1.100", 80))) Listener(SockAddrInet("aaa.bb.cc.ddd", 80), "INhttp") That's it. The preferred way of creating multiple instances in a single policy file is to create a function named the same as the instance. So as you had an instance named Zhttp in your instances.conf file, I created a function named Zhttp(), this takes no arguments. The function named init() would also work, if you write an init() function the instance specific function would not be called, as you override the default init() function provided by Zorp. Here's a complete policy file: from Zorp.Core import * from Zorp.Http import * Zorp.firewall_name = 'zorp@bcpc' InetZone("cpc", "192.168.1.0/24", outbound_services=[], inbound_services=["INhttp"]) InetZone("local", "127.0.0.0/8", inbound_services=["*"], outbound_services=[]) InetZone("internet", "0.0.0.0/0", inbound_services=[], outbound_services=["INhttp"]) class INhttp(HttpProxy): def config(self): HttpProxy.config(self) self.transparent_mode = 0 def Zhttp(): Service("INhttp", INhttp, router=DirectedRouter(SockAddrInet("192.168.1.100", 80))) Listener(SockAddrInet("aaa.bb.cc.ddd", 1555), "INhttp") > Debian 3.0.0 r0 (woody) > python 2.1.3-3 > python-extclass 1.2-5 > Zorp 2.0.0-1 > Zorp-modules 2.0.0-1 > libzorpll 2.0.18.4-1 > libglib2 2.0.6-1 > > NOTE: When I install zorp I run: > dpkg -i --ignore-depends=libzorpll zorp_2.0-1_i386.deb > because zorp depends from libzorpll and libzorpll depends from zorp. Is > this cycle OK or I've misintalled zorp? Hm... I've checked this and I've found no anomalies, can you show your dpkg -s output for the packages you installed? -- Bazsi PGP info: KeyID 9AF8D0A9 Fingerprint CD27 CFB0 802C 0944 9CFD 804E C82C 8EB1 From zorp@lists.balabit.hu Sat Feb 22 02:40:02 2003 From: zorp@lists.balabit.hu (Jenny MacOrton) Date: Fri, 21 Feb 2003 21:40:02 -0500 Subject: [zorp] RE: Don't forget to call me tonight!! Message-ID: <20030222023423.040468D90@www.balabit.hu> As promised, we have reserved a position for totafo@optonline

As promised, we have reserved a position for zorp@lists.balabit.hu,

 

but we need you to confirm immediately.

 

Click here to take the Free Tour!!!

 

We're holding your spot and we have people waiting to be

placed under you. You need to confirm right away if you have not

already done so!! We will then notify you when your commission check

is waiting!! (Confirm Now!!! This Offer Expires Soon!!!!).

 

You must confirm your position immediately or you'll lose out

on all of the people who are waiting to be placed under you.

 

Remember, you make money every time someone WE place under

you upgrades to member. This could be extremely

lucrative to you, So go right now - before you do anything else!

 

Confirm by going to the website below.

 

Click here to take the Free Tour!!!

 

There is absolutely no charge or obligation, you can Test Drive our system for Free!!!

Let the system prove to you that it works before you decide!!

Confirm now and we will start placing people below you immediately.

 

One last thing, If what you are currently doing is not working for you financially,

And you continue doing the same thing, Can you really expect a better result?

Think About!!

 

To Your Success in 2003!!!

 

Craig Delmeyer

 

Webmaster

 

Click here to take the Free Tour!!!

 

 

Subscription Information

 

While Financial Freedom Enterprises is happy to bring the best and most widely-used products directly to you, we also respect your preferences.

 

If you do not wish to receive any further messages from us, please send a blank e-mail to remuuvemoiforever@hotmail.com with the word "Remove" in the subject.

 

This option will not affect any preferences you may have previously expressed with respect to other emails.